This may look like a simple effect to the pros, but im no sure how to achieve it in PS. Im designing a web page and i like designs with flowing curves ( I think it looks cool & modern looking) but Im not sure how to make these effects in PS. To give you an example of what i like, look at these example of sites (especially the first 2 pages)
How can I make beautiful curves with nice colours like these?
This may look like a simple effect to the pros, but im no sure how to achieve it in PS. Im designing a web page and i like designs with flowing curves ( I think it looks cool & modern looking) but Im not sure how to make these effects in PS.
How can I make beautiful curves with nice colours like these?
After doing everything i can find to optimize my hardware/software for doing 3D animation in Ps Ext CS6. I still cannot render an animation to video using the Ray Traced Final setting. (Ray Traced Draft, no problem.) The last time I tried (after repairing disk permissions), at least Ps did not crash and give me the same old crash report (Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x00000007a0020000). This time I just got an error msg that my request could not be completed. (Progress?) Checking Activity Monitor, I could see that my available RAM, which was 13 GB when I started the render was now less than 1 GB (761 MB).
So, I have come to the conclusion that my 16 GB of RAM and 300 GB available for virtual memory on my HD is not enough for rendering the type of 3D animation I am trying to do. Would you agree? Also, I have read it is not good to use the same HD your program is installed on for a scratch disk, so I am considering getting an external solid state drive to use as a scratch disk.
I would like to create an eps triangle with curves (instead of points) but don't know how. I've Illustrator version 8. I need to open in Illustrator version 8
View 4 Replies View RelatedI need to create a map, connecting different parts of the world, with curved lines that have a specific thickness when compared to each other, similar to this print screen: [URL] ....
How should I go about doing it? I am completely new to Adobe Illustrator, and I am using the mac Version.
I want to create a node on the intersection of two curves (eg bezier curves). Of course I can zoom in and try to be as near as possible, but it won't be exactly. Is it possible to exactly find the intersection?
View 9 Replies View RelatedI am preparing a batch of images for test submission, for a stock photo library.Recently a person working for one of the visual effects studios in London happened to tell me that these strict agencies use some set of layers that can separate tonality and color values to check for banding, dirtiness, noise and all those technical flaws that the human eye can't notice on a monitor.He said they perhaps have an action for it so that they can review faster.
He said that it is known as 'Craze Curves' or 'Visibility Curves' technique.He further added that all the studios use it before giving the final files to clients so that there is no issue in printing afterwards.It is sort of a quality control check and has been used by digital and advertising agencies all over the world.
But now his email seems to have changed and I can't get in touch with him to know how to use the technique.
I created a 2D planar sketch, now I need to create a 3D sketch and Helical curves, but as I enter into the 3D sketch mode, I cannot perform any functions, all my tool bar options are grayed out?
I am running 2014 Pro Design Suite.
I want to create a 3d ployline from a 2d polyline with curves. When I use the convert 2d polyline to 3d polyline command it places a bunch of vertices along the curve so when I go to place elevations on the vertices it takes too long. I want to be able to give an elevation at the pc and pt and have it place elevations along the curve from this info like it does on the stright lines.
View 6 Replies View RelatedHow can I create a label for a live bottle with a lot of curves on it?
View 3 Replies View RelatedAm I the only one who has edited a stroke with the stroke width tool, then outlined the stroke only to find a countless number of points and noticeably unsmooth edges? Is there a setting or certain way to ensure that the stroke width tool won't corrupt the smoothness of my shapes? The stroke width tool is the most handy new feature I can imagine, but this problem makes it almost entirely useless, unless designing something where precision and smoothness are not important.
View 6 Replies View Relatedi have been using the drivenTime node to create walkcycles that follow motion path curves where the out time is connected to some attribute via a unitToTimeCOnversion node.in previous version of Maya.
When i try to connect anything to the Out Time of new drivenTime node the connection never works, not even keyframes?
is there a fix or workaround for this?
API enhancement/fix in SP1: Cannot create a radius dimension on circular drawing curves projected from spline edges.Does it in some way trying to refer to the issue with nonplanar arcs turning into splines in drawings saved-as AutoCAD .DWG?
View 3 Replies View Relatedhow to use Curves, in CS3.
View 6 Replies View RelatedHow do you get bezier curves in PhotoShop CS6 to act the way they used to in CS5.5? In 5.5 i would be able to move/adjust the path with the direct select tool and the control arms would stay at the angle they were created at. In CS6, depending on where you direct selected the path, would depend on how the path could be/would be adjusted. And the control arms have become more fluid, rather than static. They do not keep the angle they were created.
View 2 Replies View RelatedHow do I get a percentage value in Curves-in CS5 it used to be command-click would make a dot on a point on the curve, to allow for accurate adjustment...
View 8 Replies View RelatedWhen making adjustments in the curves panel the procedure in previous editions was to raise the curve in the upper section to lighten the image and lower it to darken the image. Mine is working just the opposite. When i raise (or lift) the curve the image darkens and when I lower it lightens. The lower half for contrast works the in the same backwarsds way.
View 2 Replies View RelatedWhen using Curves to increase contrast for an image, I see that some people will use the eyedropper to define an anchor point on the Curve to manipulate, and others just seem to drag on a spot on the curve without first using the eyedropper.
1. Is there a reason to not use the eyedropper, and instead just drag a point on the curve?
2. Won't using the eyedropper always be more accurate than just eyeballing a spot on the curve to drag?
I have a question about using toning curves...
In older versions of Photoshop, I was able to use Paul Butzi's beautiful toning curves (which are ACV files) through the Curves menu.
There was a 'Load' button, and if I pressed that, I could browse my curves folder and pick whatever curve I wanted. Is there any way to do that in Photoshop CS5? I can't seem to find a 'Load' button under Curves, and I'm not sure how to use the Custom Curve feature.
I can't seem to load them under Filters, either. How I could load them?
When using Curves, one used to be able to move from one point to the next ("point" is what I use to refer to the points that determine the shape of the curve) by holding the Control key and pressing Tab.
This no longer appears to work with Photoshop CS5. I am wondering how I can move from one point to the next without having to click on the next point. More often than not I end up actually moving the point when trying to click on it.
So, I absolutely love a lot of the changes I've come across so far. I am very happy with the crop tool changes except for one thing. I work on hundreds of B/W headshots at a time where all I do is crop>curves. Up until CS6, when in the crop tool it would still show tone info in the info pallette. Now it shows nothing. This puts a crimp in my workflow because I either have to open the curves dialog or switch to the eyedropper tool to see if I need to apply curves. I have noticed that if I hide the crop area it will revert to showing the info .
Also, with the curves dialog I am going to complain about something that started with CS5. The 'click and drag in image to modify curve' feature is pretty cool but it should respect my option settings. I work with it displaying the amount of pigment but the click and drag feature doesn't respect this setting.
As I said small issues (especially the second one) but it would be nice to get them changed.
I am stumped with this problem and havn't found a thread that seems to give me a points in how to simplify the procedure/problem described. Is there a plug-in ?
I am using PS7.0 and am at the beginner end of the spectrum.
I have TWO pictures and want to duplicate the colour values at certain points in the picture. The manual operation would be to:
1) Open Picture #1, put colour samplers in at the points I want duplicated (max 4) and write down on a piece of paper the RGB values at those points. I make the assumption that the points are all present on the Picture #2 and that the tonal values are all different enough that they fall on different parts of the tonal curve. ....
how to draw a curve to get this kind of effect?
View 4 Replies View Relatedhow to make curves with a set pixel width. It's hard to explain my dillema with words beyond that... Most of my question is detailed in the picture I've enclosed... (I needed a few visual aids to get my point across, lol)... I'm going to post again in this thread with another picture to help further explain, so check that out if this one doesn't cut it for ya.
View 14 Replies View RelatedI'm using photoshop 6 and have a problem. When I use dutone curves,I can't reset it. Namely that when I finished tinkering with the curve and save the image, when I start on a new image the old curve is still in place. How can I reset the curve back to its original state?
View 4 Replies View RelatedIs there a way to invert photoshop curves? Like making the opposite curve to neutralize an existing curve that I have.Actually it's simply switching all the input and output values,
View 11 Replies View RelatedI have PS 6.0.1. yes I know its an old version but it does everything i require so I have no need for upgrade.
One of the main function i use it for is adjusting curves. recently I have noticed when i open a jpg and select adjustment/curves. Photoshop automatically selects the eyedropper tool and the curves window is NOT displayed. When i attempt to do anything i get the windows error bell/noise. The only way i can carry on is by selecting escape on my keyboard.
This also happens if i attempt to add a curves adjustment layer. The eyedropper tool becomes selected and no curve adjustment window is displayed.
PS CS3
Windows XP
how to use Bezier curves for PhotoShop CS 3.
creating nice and smooth curves, curved lines etc.
View 4 Replies View RelatedUsing Photoshop CS3 I am unable to change my darkness to lightness orientation as recommended by Dan Margulis (lightness on left, darknss on right). That option was available in CS2. Is it no longer possible in CS3?
View 2 Replies View Relatedi`ve created a shape using curves, how can i antialias it and get a smooth curve (and a smooth outline for my mask)?
View 3 Replies View Related