Photoshop :: Cleaning Up Pics
Jan 9, 2007
I have some jpegs (72 dpi) of family that I wanted to print out and put in a collage for a family reunion. I would like to enlarge them, but of course this makes the pictures pixelated and bad quality. Is there a way to get around this and make them look better? I could swear I have seen a plug-in that does this (or simulates) and helps make pictures look better with more detail. If there is any special tips or tricks or even recommendations of plug-ins on how I can achieve this,
View 2 Replies
ADVERTISEMENT
Jul 23, 2013
I have a pretty high resolution map of Manhattan in 1884 (screenshot below). The bones are good and it's what I need for a research project, but I'm finding it next to impossible to clean it up to the point where I can start. Ideally I want to get rid of everything but the gridwork of the streets. I can desaturate it and play with curves and levels, etc., but while I can clean up a lot of it, I'm finding it pretty much impossible to isolate the street grid. I already have 500+ text layers for street and avenue names. I'm hoping there's some way to do this that doesn't involve me setting up a new layer and tracing the whole island, block for block.
I'm using CS6 on a mac.
I'm fairly comfortable with photoshop; I can work with layers and masks, etc., but this is beyond my technical skills. I'm wondering:
1. Is this doable at all?
2. Am I missing something obvious?
3. Should I start over again with Illustrator?
I'm not very familiar with Illustrator, which is why I started with Photoshop. However, this is not anywhere near my area of expertise
View 2 Replies
View Related
Jun 14, 2013
Have some questions regarding follow up on my installation of PS CS6. First thing to say is that I hardly ever use PS. I use LR4.4 99.9% of the time, but occasionally have gone to CS3 for small adjustments even though I don't really know how to use it. Planning to learn now that I have 6. I'm running 10.6.8. (Disappointed that I can't upgrade to LR5 so will, at least, need to learn content aware, which was my main reason to go to PS6 anyway.)
So, the questions:
1. I have CS6 standard upgraded from CS3 extended. Any reason to keep CS3 around for low-level, general photography editing to take advantage of its "extended" qualities?
2. Other Adobe software that seems to have tagged along with other Adobe programs:
a} Adobe Stock Photos CS3? Nothing even opens when I click on it - can it go?
b) Device central CS3 - assuming it can go if CS3 goes but I don't see a "Device central" for CS6. Don't really know what it is, anyway.
c) Extension Manager CS4, CS5.5, and CS6. Can't imagine where the CS4 came from. CS5.5 probably came along with In Design 5.5, which is still in use, so probably keep that? Assume keep CS6.
d) Bridge 5.1 and 6. Looks like they are both picking up the same things. I don't use it since I'm using LR. Figuring get rid of 5.1 and keep 6 just because.
e} Interestingly, no ACR came tagging along with PS CS6. Since anything I would send to PS is going to go through LR4 I don't see a real reason to have it. I think the new fun stuff on LR5 isn't going into the new ACR anyway and, I figure I wouldn't be able to run it on 10.6, it doesn't seem like I really need it.
View 2 Replies
View Related
Oct 15, 2008
Can I safely remove my Documents and SettingsmyuserLocal SettingsTemp files and directory? I have 18 GB of stuff in there and I have no idea what any of it is.
View 10 Replies
View Related
Sep 8, 2005
need some insight on cleaning up images after adjusting the brightness...
They are very blochy like...
View 4 Replies
View Related
Jan 19, 2004
I have a picture here which is a small jpeg from a rather bad scan, and I'm trying to practice cleaning up with it.
I cropped it , ran auto colors and auto levels, and then desaturated the lips a bit,
View 4 Replies
View Related
May 25, 2004
I have an old photo of my brother and his surfboard that is very grainy and dark. It was taken with a very old camera and has been abused and cracked through the years. I have scanned this photo and would like to remove the grain. I don't really care about the background, but I would like my brother and his surfboard to look sharp and clean. I tried burring the image to lose some of the grain, but I then lose alot of the contrasting lines and obviously the sharpness of the image.
View 1 Replies
View Related
Jun 7, 2006
I recently received this poor-quality Xeroxed scan (below) as a PDF, and was asked if I could enhance it to show the names written on the pages. Does anybody know of a way to improve the quality of this image so the names are more legible (original image size is 8x11)? The image is of a logbook of prisoners interned at Buchenwald concentration camp in 1944; my friend's father's name is on the left page, about halfway down. The quality is actually much better in PS than what is displayed here. If need be, I can email you the original PDF, if that'll help.
View 8 Replies
View Related
Jan 27, 2009
I'm new to the design game and am receiving logos from clients with the white box around them. Besides using the magic wand or pen tool, (which makes the type/logo pixelated), are there any other ways to fix this problem?
View 4 Replies
View Related
Nov 12, 2012
My client requested that a lot of the visual clutter in the sky be removed - I agreed and was happy to oblige. My skills in Photoshop are modest, so it took me a very long time to finish the job using an assortment of the usual tools.
I suspect there are faster and easier ways to accomplish what I did.BEFORE:[URL]...
AFTER: [URL]....
View 5 Replies
View Related
Mar 16, 2012
Which tool is very friendly for pic cleaning in Photoshop.
View 7 Replies
View Related
Jun 30, 2006
I often scan b/w documents with my scanner to Photoshop. The scan always has spots (noise) which are time consuming to remove. I'm basically zooming in and erasing each one.
Does anyone know of any easy time saving steps/procedures I could use to remove these spots?
View 1 Replies
View Related
Jul 15, 2005
how to get them clean and crisp? black ink drawings is what im scannin in, ive figured this much out; scan it in at a high resolution (i scaned in at 600dpi), scan it in grayscale, mess with the levels. the overall goal is to scan in a line drawing and color it.
im trying to get the lines to be a uniform solid black. ionno if this is something i should try to get when im actually drawing it or something that is best left to PS. it looks pretty good on paper but when i got it in PS the lines are not as solid as i thought.
View 1 Replies
View Related
Mar 2, 2006
Does anyone know how to clean dirt from a photo without losing the texture or the original integrity of the pic? The photo attached has a layer of brownish dirt discolration evident around the collar and clothing. I imagine this would take hours to correct using the stamp tool. I'm sure there's a way to combine layers or something to clean this up without over-softening the photo.
View 1 Replies
View Related
Jan 24, 2009
I scanned a color image from a newspaper, so of course it's pretty grainy. I've done things like despeckle, which helped a bit, and some other filters to get rid of noise and such but I was wondering if anyone had any useful tips for improving newspaper images? (i.e., get rid of the grainy look from the high dot content, just make it look cleaner)
View 2 Replies
View Related
Oct 24, 2012
I'm on XP and want a simple program for cleaning up and storing old photos.
View 4 Replies
View Related
Nov 20, 2007
I am currently using AutoCad 2008 and when i get DWG from another consultant I need to 'clean' it up to make it appropriate to xref into our working drawings. I need tips on the best way of cleaning up the consultants drawings. I delete a majority of information I don't need and put the information onto a couple of layers then purge. Should I explode the blocks? The xref keeps crashing the working drawing.
View 9 Replies
View Related
Jul 30, 2012
I have a vector image that includes a red circle as part of the image, but the circle is not 100 % even and round. Is there an easy way to clean up the circle to make it even all the way around?
View 4 Replies
View Related
Jan 16, 2014
I'm trying to figure out a way to clean up the background in a photo I'm working on. Is there a way (tool/plugin) to extend existing material over an area you want to cover up? I want the background to look consistent. I tried cutting and pasting and it looks OK but a little ragged.
View 6 Replies
View Related
Nov 27, 2011
Working on a part and after much extruding and intersecting ended up with pretty much what I was after, but there are all these surfaces that don't seem to clean up by boolean operation of the solids. Will this cause a problem when I go to manufacture from STL file ?
View 5 Replies
View Related
May 29, 2013
I have an old Commodore 64 Disk label that I would like to clean up for re-printing.
method of making this black and white (1 bit depth) while retaining the smooth edges?
I suppose it could be gray scale, if need be as long as it looks clean and mostly b/w.
View 2 Replies
View Related
Jul 22, 2013
I quite often have to work with scanned in images of very old drawings. (some going back decades).
These are usually sent to me in PDF format. I extract a TIFF image from the PDF, then will open it up in Microsoft image manager to tweak the rotation, save, then reopen it up in Microsoft Paint to clean up the image. (delete trash marks, old notes, redraw / darken lines, etc.)
View 5 Replies
View Related
Mar 26, 2012
Oftentimes I face the need to restore a picture of a text document -mainly forms to fill- to something approaching the original document. This requires to remove all the grey parts and to have a result in black on white i.e. no other colors. It may also require some understanding of how characters are formed -regardless the language- to prevent white dots in the middle of a character
With the document restored, one can then fill the form with an editor so as to have it clearly (printed characters) and easily (because filled with a editor) filled
My question is how do you do that with Gimp.
View 2 Replies
View Related
Jan 16, 2013
Is it possible to clean up all "sketch" lines in this image, leave just the skull (with teeth) with smooth and dark lines. I want to turn this into a logo.
I can make this image black and white then quickly get rid of the red. I'm just looking to get rid of the gray sketch marks and make it all one solid black outline while keeping the lines the thickness they should be as to not alter the picture.
View 3 Replies
View Related
Jul 5, 2012
I recently upgraded to a new machine . I downloaded ACLT 2012 and it runs like a champ.
Now i am cleaning up scads of AC files from my old computer that were transferred and dumped into Documents and Notepad and all sports of places by the tech guys who built my new machine.
Some are of hatches, some are of commands, some just will not open....but all are dated from 10 years or longer from old versions of AC.
NONE are from my new ACLT 2012
What would be the best way to delete?
View 1 Replies
View Related
Feb 27, 2013
I did a live trace and it did pretty well. The image I traced was fairly simple. But I ended up with a lot of extra pieces in what should be a solid color. I've tried Select > Object > Stray points, but that didn't work. I have large area that I want to be one solid piece. Within this area, there are lots of little "pieces" that are the same color... How do I merge them all into one piece? I tried "Unite" in the pathfinder, and that didn't work, either.
In case I'm not being clear, basically, I want to do what the "smooth" function does in Photoshop... but in Illustrator.
I'm using CS6 on a Mac.
View 4 Replies
View Related
Nov 1, 2011
crest 1.cdr
I have been playing with the nodes at the peak of this image but I can't get a uniform line.
View 5 Replies
View Related
May 23, 2012
which tool/s to to create an elliptical frame that I can pick up and paste would be sufficient to get me going.
I have a photo picture which I made 'elliptical'. You can see I have tried to make it elliptical using Word but the edges are messy (see attachment).
View 3 Replies
View Related
Oct 14, 2013
I'm trying to import a part from solidworks. I've tried opening the .SLDPRT file, converting to IGES (203 and 214), and STEP. All give the same result.
See below pictures - the Maya import has "dingleberries" where there should be a flat surface (i.e. some of the tubes extend when they shouldn't). I know imports are rarely perfect, and that's OK as long as I know how to clean things up. How can I trim off the extra surfaces that appeared after the import? I'd just use an extruded cut in SolidWorks, but I'm in a strange land with Maya.
First - the part looks like this in SolidWorks:
But Maya sees:
View 1 Replies
View Related
Nov 15, 2012
I am trying to clean up my block that i have made and there seems to be some lingering text styles?
I only am using the one? There doesn't appear to be any more hidden layers or entities in the drawing? Yet when i try to delete these text styles from the text styles manager, it won't let me? It keeps telling me it is in use?
Note: Purge doesn't work within in the block editor it seems, and if i open the .dwg and do not go into the block editor, purge finds nothing to purge?
View 1 Replies
View Related
Jan 16, 2013
I have been working on this for hours and have watched a ton of tutorials but I'm still not getting the effect I want with my image.
Is it possible to clean up all "sketch" lines in this image, leave just the skull (with teeth) with smooth and dark lines. I want to turn this into a logo.
I can make this image black and white then quickly get rid of the red. I'm just looking to get rid of the gray sketch marks and make it all one solid black outline while keeping the lines the thickness they should be as to not alter the picture.
View 1 Replies
View Related
