at the following location is an image that contains some strokes of faint white stripes.
How are these stripes done? I did thinkl that it was a shape used by a brush, but as you can see, it twists, sso I doubt its that.
I attached a biped via physics to a simple character mesh and made the envelopes fitting like I want them. But here comes the problem. If I move the thigh or calf, it doesn't matter, the mesh starts to spinning around the bone of the calf and I just don't know how to fix this.
The spinning is almost not to see if the thigh gets moved though. I attached two pics and hope that the problem will get more clear that way.
when I try to use rulesurf between 2 circles on an angled plane, the surface twists instead of drawing a cylinder.
View 2 Replies View RelatedOne can stroke a Path with the Brush Tool, Pencil Tool, Burn Tool, etc., which affects pixels of a targeted pixel Layer.
Shapes can have solid colour strokes, gradient strokes and pattern strokes which are part of the Shape definition.
Am I alone in thinking that it would be useful for Shapes to be able to have their stroke defined as a Brush (and possibly other tools) which doesn't change the pixels of another Layer, and instead remains an editable property of the Shape's appearance?
need a tool that views ps brushes, shapes before installing.
View 3 Replies View Relatedhaving trouble with my brushes--I use to get a round circle for a bursh, now I am just getting cross hair brush. What did I do to change it and how do I change it back to the round circle?
View 1 Replies View RelatedHave CS3 on XP.
I am trying to get a pen stroke that starts out thin...gets normal size in the middle...and then shrinks back down to a thin line at the end.
In brush dynamics... I am able to get a thin ending on a stroke but not a thin beginning. Im using the size jitter control set to fade at 300 to get a line that fades to thin OK at the end...but I cant make the beginning thin!
I am trying to stroke a curved path for Christmas designs...scroll kind of looks...thin beginning...fat middle...thin end.
A newbie question about brush presets ...
Brush tip shape section on the brush panel shows the brush tips for the selected set of the brush presets ... at the end of the list there are some brush tips (they are changing with the selected set) and they are not included in the selected set of brush presets. Where are those additional brush tips are coming from?
For example ... for calligraphic brushes, at the top I can see the tips for the set of calligraphic brushes in the window ... but, there are some other brush tips there at the bottom (red lined). Where are they coming from?
I simply cannot get the brush to taper with the preset or custom settings.
[URL]
I was asked to make a couple fantasy maps that look hand-drawn. It would be really cool if I could make an isometric mountain brush that puts a different mountain down every time I click it, or a randomized series of mountains along the brush stroke if I need a range. I thought some of the special effect brushes did this, but it turns out they just randomize the rotation in CS6.
On a related note and seemingly more unlikely, is there a way to have a two colored brush that uses foreground and background? If above mentioned mountain brush consists of ink-like lines, it would be useful if the mountains came in already filled so that they cut out the lines of whatever mountain is behind it.
I have made my first object with the shapes tools, LS, and with the use of the Path Selection tools and then Grouped everything via the Layers panel.
Next I am suppose to add a New Layer and draw a Rectangle Shape and place the Shape Layer below the group and above a Layer w/a Radial Gradient . then I am suppose to use the Paint Brush on the Shape to Airbrush a light (light as in light from a light bulb not as in a shade) effect but when I go to select the Brush tool I am told I must Rasterize the Layer beforehand.
However, when I do Rasterize the Layer the Shape becomes filled with a color which leaves me unable to achieve the desired effect. I draw the shape with the Color Fill set to None.
I checked the "User Manual" but I have been unable to find an answer as to what I can do. I have tried using the Path tool to create a Selection before trying to use the Brush tool but that also tells me to Rasterize beforehand.
I'm learning to create digital scrapbook pages. One of the most challenging tasks is making a fiber. Can you suggest how I could make a brush that would produce the shape of the fiber that I've referenced in my attached picture?
View 9 Replies View RelatedI am looking for a simple line art- type apple for a preschool project I'm doing.
I tried drawing one with the pen tool, didn't work so good. I did a search, try looking for *apple* on the internet.
The brush tool shape changes when zooming into an image. Instead of the normal circle to indicate the area that will be affected by the brush, it turns into a large curved X, or a large half moon. Sometimes there are two, three or four horizontal ovals (instead of one circle) going across my image. When I continue to zoom in further, it returns to a circle. Caps Lock and is off. I discovered that when this happens, if I press the CTRL key, it returns to a circle
View 6 Replies View RelatedMy brush tool has become a small cross hair and cannot get back to a circle. How do I reset?
View 8 Replies View Related- Photoshop CC "has topped working"
- Shape dynamics, brush customization not working properly
New brush selected - the settings are strange.,Large spacing, scattering on by default Shape dynamics not responding in settings, only responds by clicking the "Always Use Pressure For Size" button Eraser not working on pen Updated CC, Updated Wacom Drivers, Restarted Computers.
Photoshop CS6 worked fine (still on my computer), but CC is just a nightmare with the Wacom brush settings.
What I would like to do is to get the stroke shape, pressure and maybe velocity after a `Brush Tool' drawing action is triggered by the user, i.e. after a simple drawing operation.
I have been using the ScriptListener plugin, but it does not record this type of operation: changing the brush parameters (e.g. size and opacity), yes, but the actual drawing action, no.
I don't know the right keywords. If I make an art brush, say two solid rectangles when I apply this to a shape such as a square or star, there is a corner/point that doesn't seem connected, I get a gap/split. I'm guessing it is where the brush has started/ended along the path. These shapes are closed though right? Is there a way to avoid the gap/split? I noticed if I use the pen tool to give the point handles it'll seem connected, however now the shape is not a corner.
I know I can also use the appearance panel and set two strokes aligned along the outside, but this does not seem easy to update sizes, say I had 7 strokes for a rainbow for example each at 5 pt and wanted to update that to 7pt I would have to manually update each one? I also don't think I can use the appearance panel to set up a gradient stroke that flows along the path, such as a square with rounded corners applied, when I tried with the appearance panel it was as if it was masking a gradient beneath it.
I am using CS6, though I'm planning to switch to CC.
How do I make a custom brush shape follow the contour of a path made with the Pen tool?
View 2 Replies View RelatedI am trying to use the Bridge tool. When I attempt to bridge certain geometries my bridge essentially "twists into itself"
View 4 Replies View RelatedIn Photoshop CS6, when you have a shape layer with a layer mask, and the two are not linked together, and the layer mask is selected, you should be able to scale the layer mask independently of the shape. What actually happens is the shape gets scaled and the layer mask stays untouched. In fact, even if you option-click on the layer mask to show the mask by itself, and then try to scale it, you still end up scaling the shape instead of the mask. Even if you go as far as to make a pixel selection of the layer mask and attempt to scale the pixels, the shape still gets scaled and the layer mask still stays put! Unbelievable!
This works correctly in CS4, but not in CS6 (don't know about CS5).
I want to make a vector shape from a path. Is there a way to bypass having to define a new custom shape? I just want to quickly add the vector shape to a new layer, but I don't need it defined as it'll just be used once.
View 5 Replies View RelatedShape making from multiple complex shape and path layers?
so i have few layers(all vector paths and shapes) .
now how to make a shape from all of that. every new shape is layer for itself. I need it for logo.
any way to delete more than a single shape at a time from a shape collection file, other like step by step with the option key? I have one collection with about 400 shapes and would like to save it to some "groups", like people, arrows, devices..
View 1 Replies View RelatedSince the release of Photoshop CC the "Live Shape Properties" has basically chosen when it does and does not want to show up.... sometimes I even create a new shape to replace the old one and it STILL does not show the live shape properties... how hard is it to make sure the options are available at all times? I opt for a discount since this is a half working application and the features you highlighted barely function...
View 1 Replies View RelatedThe brush size on my paint brush and clone stamp are not working properly.
View 1 Replies View Relatedyou can see what i mean in the following picture examples.
Selecting a brush (any 1 pixel) brush
[URL]........
shows my selection . Drawing a straight line
[URL]........
Zooming in to the line (600%) you can see i can draw a marquee through half of it ...
[URL].........
No matter what 1 single pixel brush i use this will happen... no matter which computer i use cs6 on and different copies of the installation. Anyway have any insight into this? frankly... it's somewhat limiting that i can't use the brush for stroking a shape if i need a pixel line and yet soft curves that a pencil won't get you.
I am not very good with photoshop, and if there was a brush tool setting to make it just like an actual paint brush.
View 1 Replies View RelatedWhen i pick my brush tool and try to get a soft brush from the drop down menu they all look white, i don't see a soft brush from a non soft brush.
View 2 Replies View RelatedThe brush preview size does not match brush stroke. I've insert a pic of the problem. I tried allmost everythning, but nothing works.
I use a wacom tablet.
I'm a web developer but have little knowledge of Photoshop. I got a web design job to create something very similar to URL.... Firstly i want to know how to make a brush mild like the white brush on that website. It doesn't overshadow the blue background.
View 1 Replies View Related