I'm sure this an easy one and I've overlooked something, but I can't seem to get the solution for this problem. I have a bitmap image of a map and I would like to split this image up into many tiles which can be saved off as seperate images. if possible I would also like to be able to specify the size and resolution of these tiles.
View 1 RepliesI thought this might be of interest hereabouts since the subject has cropped up a couple of times lately..Creating seamless tiles in Xara Designer without plug-ins or external software
View 9 Replies View RelatedI've got about 200 photos that need to be re-cropped from 720x486 to something smaller. Is there a way to do this to the entire lot with a single command?
View 4 Replies View Relatedwhere I might get a free or cheap plugin for making seamless textures?
I need this plugin for the PS CS2 for Mac.
I am familiar with running actions and running an action on a batch of images. Can someone give me an effective technique for cropping a batch of photos? I need to take a bunch of photos in vertical and horizontal orientations and crop them to a specific size and resolution to fit on a screen for a slideshow.
The problem is there is no way to ensure that the photos crop correctly (e.g. cut off faces or important parts). Is there a technique or plugin, perhaps, that could at least ensure that MOST photos don't crop incorrectly?
I may just be missing something here. If I open an image in photoshop and crop it, the image shows up at the new cropped size and I can then save the new image. I have 1000 people images with all different sizes but the same ratio. My hope is to create an action that crops a photo to a standard size and then saves into another folder.
So I started my new action and did the crop and saved. Then I ran this action using automate and batch. The processing does happen but the images are cropped and then remain in a black box the size of the original photo. This is a problem for me... I only want to see the resized photo.
Just wondering if I could use Lightroom as I would Photo Shop- for batch cropping of images.
View 1 Replies View RelatedI have 20 files that i need crop with same settings how can i automate that.
View 2 Replies View RelatedI sent a DNG from LR to PS with the "open as smart object in Photoshop" command and after I cropped it in ACR ... the result is in the following image:
It is not cropping canvas .nSo does this mean that we can not use ACR in PS for cropping smart object files?
I got over 160 color corrected RAW files from my photographer when I thought I was getting TIf or PSD files. I need to put them into an in design doc to send out for printing. Is there a way to convert all of these in one fell swoop without messing up the work that has already been done?
I didn't allow in my timing to save each one individually since i didn't know I was going to need to do this. I am really unfamiliar with batch processing, so how to best go about this, or if I even can. I am working in Photoshop CS6. version 13.06 x 64.
I'm trying to batch save a series of PNG animation files using the File => Scripts => Export Layers to Files action in Photoshop CS5. Each layer has a transparency and a shadow that have been converted from layer effects and "baked" into the image. I tried the batch save but it turned all of the transparencies solid with white backgrounds. Also the image size was not cropped to the dimensions of the object on each layer.
Lastly, is there a way to edit the numbering for each file? When the images were exported it created a lengthy set of numbers after each file name when all I need is a 00 padding.
A simple action.
File>Export>.bmpClose
If I run the action on one file, it works perfect.
If I try to run it as a batch, it creates the bmp files fine.
But it also creates either a .ai file, or two .eps files!
Writing one or two extra files signifiantly shows the process down.
After I run the batch it is not hard to simply delete the extra .eps/ai files of course.
But writing those files seriously slows the process down, and I have about 89,000 more files to go.
Illustrator CS4. Windows XP
I am trying to crop and straighten my 35mm slide scans. When I imported the scans the average file size was 5mb but after cropping and straightening the scans in lightroom 5 and exporting them, the average file size was 15mb! There is no increase or decrease in quality.
View 1 Replies View RelatedI am a Canon shooter but received some raw Nikon files from a fellow photographer. We've done this before and I've had no problems with his files - well, we have done this a number of times but before I used LR 4 (i.e., in LR 3 and before). With this batch, when I start cropping, the image gets stretched vertically, but is fine when I hit enter to commit the crop.
View 12 Replies View RelatedAs an organization, we have opted to go with STB as we have some complicated requirements that CTB doesn't accommodate. The wisdom of that decision is a moot point and I'm aware of the vast array of opinion.
We have a legacy of CTB drawings that occassionally need to be brought forward when projects get resurrected (state government highway designs are prone to getting shelved).
Up to AutoCAD 2009, I've had a VBA routine that performed a few operations on a list of files stored in a text file:
- Open the file
- Convert to STB using "CONVERTPSTYLES" with a specified STB file.
- Run a script to load a layer state file to change the plot styles from Style1, Style2 etc, to their correct named plot styles.
- Manage a recalcitrant layer that refused to play ball.
- Save and close the document
- Get the next file........
This was all fine until 2010 came along with the announcement that VBA was to be phased out. 2010 is OK with the VBA enablers, but now I've got some work to do.
Our organisation's development language is C# and I'm using Visual Studio 2008 Professional Edition to develop my C# .NET code.
Is there another mechanism than "SendStringToExecute" for sending a command such as convertpstyles to AutoCAD and getting .NET to wait for it to finish before proceeding.
I've got CommandEnded code that handles waiting for MTEXT and DTEXT commands to finish and I've tried constructing a CommandEnded for CONVERTPSTYLES, but it seems to me that commands that throw dialogue boxes such as CONVERTPSTYLESand SCRIPT aren't handled the same way.
I've tried setting FILEDIA to 0 prior to running the CONVERTPSTYLES command, however the message box that CONVERTPSTYLES presents before asking for the STB file appears to be getting in the way.
I would like to transfer batch commands that I created in CS2 to CS5. these are the commands created under import-batch. where are those files stored and will cs2 files work under cs5 (or are they version specific)
View 7 Replies View RelatedPhotoshop CS2 & CS3 will not open my NEF raw files {Nikon D300}. Both versions have always opened my raw files. Also, CS3 locks up when I batch resize jpgs.
View 21 Replies View RelatedI would like to automate of saving, renaming, closing open documents then placing them in a seperate folder after I'm done adding watermarks to my images. The problem I'm coming across is that the action i have renames all the files using the same name (whatever example/file I used when I recorded the action).
So even though the original file names are 123.jpg, 124.jpg, 125.jpg and I want them to be renamed as 123c.jpg, 124c.jpg, 125c.jpg all of them gets renamed 122c.jpg.
I'm not sure how to do a screen shot, so here is the skinny on what I have done...
Under the Batch window I marked the following:
Play:
Set: Set1
Action: Watermark Save & Exit
Source: Opened Files
Destination: Folder Desktop/Watermarked Pictures
Override Action "Save As" Commands (box is checked)
File Naming: "Document Name+c+extension
Starting serial #1
Errors: Stop for Errors
what I did wrong??
I use CS4 if that matters.
Im in the process of upgrading from CS5 Design Standard to CS6 DS. I had no problem copying my custom InDesign workspaces from the earlier version to the new version.
What I'm having a hard time with, is how can I get the batch files I use in Photoshop CS5 to copy over to the current version? I distinctly remember doing this when I moved from CS4 to CS5, but for the life of me, I can't remember how I did it, and I've been looking all over the Internet with no success.
I'm on OS 10.6.8 (I know it's old, but everything works beautifully, and I'm not gonna move to ML until I absolutely have to…)
Process a batch of files?
View 5 Replies View RelatedI made an action that opens, resizes, saves and closes files. I loaded it into "file>automate>batch" and designated both source and destination folders(which are different). For some reason the batch processed files are not saving to the designated destination folder specified in the batch gui.
How can i correct this?
I am using Bridge and Photoshop CS3. I have dozens of raw files that need to be saved as .tifs. They don't need any adjusting; just a simple save as tif. Is there a way to do that in one batch without setting up my own action?
View 1 Replies View RelatedI have a folder (over 500) of high res tiff files which are pictures that our advertisers use in there adverts.
I need to create low res jpgs of every image, is it a case of manually doing each indivdual file or can a batch process them.. if so how?
What I'm trying to do is create almost 360,000 files from scratch. You know, doing this by hand on my own would take a year. I know there is a way to batch create those files in photoshop from scratch. I know how to work with the batch function if I want to, let's say, convert 300 images. That's easy. But how do I create multiple images from scratch? Code:
View 4 Replies View RelatedI want to tile this as a pattern, if I follow the traditional off-set routine I will destroy the clean pattern as so commonly found on pages such as; this.
View 19 Replies View RelatedI'm trying to create a seamless pattern in CS6. Before I had CS6 I didn't have this issue.
So, I have my 1500 x 1500 pixel document.I have set up the new pattern design in the center that I created.I go to Filter/Offset - wrap around and choose 750 px for both the vertical and horizontal.I fill in the spots, not touching or going to the edges to create the rest of my patterned tile.Define pattern.Then, go to fill a new larger document with the pattern and the offset is not seamless. See attached.
I have not encountered this problem before and have made lots of patterns this way. I do realize I can do this in Illustrator, but my client needs a PS file.
can anyone point me to any tutorials as in regards to creating seemless patterns using photoshop.
View 1 Replies View RelatedI have just got my web page backgrounds from various sites across the net. Now I need to make my own as the background I need cannot be found.
how to make tilable images that are seamless? A very long time ago, I had a program that would paint on one side as I paited on the other (making the image tile seamlessly). However I do not remember the name of the program and was hoping that PS will do it.
I want to save space in my external hard drive by converting RAW files to DNG files. How to create an action for batch processing these files.
View 7 Replies View RelatedI'm trying to resize a batch of a few hundred PSD files to 1000 pixels in height, keeping to the individual ratio as they are not all the same.
I thought that the image processor could do it, however it asks to specify a width value which would distort most of the images.
Various freeware batch utilities don't support transparency and flatten the PSDs so that won't do either.
I want to format a large batch of high res files to 4x6 to send to a lab for 4x6 prints. How do I do this?
View 6 Replies View Related