I'm trying to resize a batch of a few hundred PSD files to 1000 pixels in height, keeping to the individual ratio as they are not all the same.
I thought that the image processor could do it, however it asks to specify a width value which would distort most of the images.
Various freeware batch utilities don't support transparency and flatten the PSDs so that won't do either.
how do you batch resize files in PE11. It was simple in older versions.
View 1 Replies View RelatedI have over 400 AI files to process and I need to change the artboard size to the following specifications exactly on all files:
Â
X: 108 px
Y: -108 px
W: 216 px
H: 216 px
Â
Any script for this? I did some digging and came up empty.
I had an action, at least i believe thats what it was, which would allow me to batch resize a folder full of jpgs with a click or 2. But long ago i had to reformat and lost it and can't remember where i got it or if i made it. I've forgotten anything i knew about it by now and was hoping someone could point me to an action like this i could download.
View 1 Replies View RelatedI'd like to resize all the JPG files in a folder to the same size, keeping the filenames the same. How do I do this?
View 2 Replies View RelatedI tried to build an action to scale a batch of images by 75%, but when I actually run it, it plugs in the inches from the file I built it on. So the image I built the action on ended up 8.25" wide, but it's a portrait. If I run the same action on a picture that was taken in landscape mode, it doesn't scale that image by 75%, it scales it to 8.25" wide.
How do you force a scale by percentage instead of absolute measurement?
Ive been using photoshop for a long time, and am familiar with batch processing. I have over 500 photos that I need to resize. Some are very tall and some are wide. Is there a way to make photoshop resize a image depending on what its aspect ratio is?
If I make an action with image size I can set width to 300px, which works fine for wide images. The tall images though are still to tall. If I do the same thing but instead specify height then alot of my images will be to wide. If I specify both height and width then my proportions will get messed up. Any ideas? I have to do this alot, and with ever increase number of images. Im sure someone else has solved this problem before.
I just downloaded the Photoshop CS4 trial to try something.
I need to scale and resize images for use on our web site.
Our images are not evenly proportioned, some are 400 x 400 or 400 x 200, ect.
I would like to make them scale down to fit within a 240px x 240px image.
We have thousands of images to do and 3 other sizes to scale the same images to.
Can this be done using the batch automate and record the steps?
is there a program or option within photoshop that would let me select like 20 pictures and compress them and resize them? i dont want to go through and manually compressing 1000 of my digital camera pics.
View 9 Replies View RelatedI have several hundred images with various sizes, and now I want to batch resize them into a certain height (1600 px). The width must be proportional to that pixel height.
Â
When trying Automate --> Batch, it refuses to let me fill in only the height (since the images are various sizes I can't fill in the pixel width).
I have approx 200 gifs - all 32 x 20 pixels - that I would like to increase in size to 60 x 38 pixels.
View 10 Replies View RelatedI have a folder of images that range in size... but for the most part they are all smaller than the actual size I wish them to be. (For example: some are perfectly at 250 x 250. Some are 65 x 250. Some are 128 x 180. The point being that they all vary. )
What I need to do is have these images created and outputted at a size of 250 x 250. Every single one of them. Unfortunately I have 5000 that need to be resized. What I would normally do is create a new image at the size of 250 x 250 (background white) and import the smaller one (let's say 128 x 180) and center it. Then save the new one. Easy.
However, I would like to know how to do this "en batch". I'm sure it's possible, but I have very little experience with Photoshop.
I do know how to batch resize photos using adobe bridge and then tools>photoshop>image processor.... and resize but what i want to know is how to batch resize images to a specific size width and height without having to keep proportion.
Because right now i have a bunch of photos that are 2896 x 1944 pixels but i need it to resize to 1920 x 1080 for a stop motion clip. However photoshop wants to keep it in proportion and resizes it to 1608 x 1080 which is not what i want but i dont want to have to do them one at a time.
I have several hundred small portrait photos of different size that I need to resize to a 120 x 120 pixels size. Currently they are not 1:1. I've previously used Picasa to resize images manually, and this gives me the opportunity of easily crop and resize so that the face is not cut or looks too small. But I need to do this in a batch since I have a huge amount of pictures. So far I haven't been able to figure out if Photoshop can detect the face automatically and crop/resize around it. The batch processes I have tried to create end up with the face/head being cut on several pictures.
Â
I'm using Photoshop CC.
I have 5,000 photos that I took with my Go Pro camera in hopes to make a timelapse movie in Premiere. These photos come out of the camera roughly 1900x1200, and I'm interested in resizing all of them. I know that there are ways to do batch resizing. Clearly resizing each photo would take WAY too much time, especially when discussing 5,000 photos.
View 4 Replies View RelatedI'm trying to create an Action that will resize images to a constant and absolute width (600px), and save as a JPEG with a filesize of less than 160kb. I've tried Image>Image size... and Save for web with only partial sucess. Image Size does not allow you to set the filesize as a parameter - you can only set the dimensions and resolution and hope that it comes out under 160kb. Save for Web does have an optimise feature, which does work for an individual image, but not for a batch. The optimisation is done by adjusting the quality of the jpeg, but when you save this as an action, it does not record this as "optimise the image for 160kb". Instead it saves just the quality % used when recording the action. Any other images processed by that action will just be saved at that %, regardless of their filesize. Is there a way to write the action so that Save for Web will dynamically optimise each image? I'm using CS3 Extended.
View 9 Replies View RelatedI am creating a photo gallery for the web. I will store the very large original images, a large version to fit in the browser window and a thumbnail.
I am creating these using Photoshop Actions and a batch process.
The problem is for the large images I want the maximum width of the images to be 575px and the maximum height to be 525px.
This means that if the image is portrait it will be sized based on its height, but if it is landscape it will be resized based on its width. (I want to resize it proportionally obviously).
Can I make it do this in photoshop?
At the moment some images are either coming out too long or too tall.
-
I am having is that if the original image is smaller than what I want the large images to be then I dont want it to make it bigger.
I am using Photoshop CS[/EDIT]
How can I resize hundreds of pictures in a batch? I need to reduce them to get them on a web site and don't want to do them one at a time.
View 1 Replies View RelatedI have been going through my catalog & find hundreds of old pictures what I should delete as they will almost certainly never be looked at or used again. If they were to be reused I could probably only need a copy that was much smaller in size. Rather than just delete them I was considering making the files size much smaller.
Â
Is there any way yo use the batch processing tool to resize hundreds & have them saved by overwriting the old copy rather than have them as a version set? I didn't want to do this one at a time.
Is it possible to batch resize with paint.net? or a plugin for it to be able to do it
View 15 Replies View RelatedAm looking for batch resize enhancement. I did Select All and then did Re-size, but only got re-size on the current picture. Actually, I don't think SelectAll did anything. Wonder what its there for, actually.
Adding other utilities (paid or free) to get the re-size job done is not a valid workaround. The point is to use a utility that does it all. For actions that I do not do frequently, I can never remember which tool does which thing best. It would be preferable to have one go-to tool that meets basic editing and file needs and is easy to use. I am thinking paint.net may be mostly for advanced editing.
I ended up using MS Picture Manager for this task, but in folders that need selective selections (e.g. select all pics > 2Kmb), they don't support n-to-n-selection with ctrl-shift.I had to use Explorer to copy the desired folders to a temp folder then use MS-PM to Select-All and Batch Resize; then copy back. blech. There once was a uploader tool from a website photo hosting site I had used in the past that did batch resize, but couldn't remember which or where it was.
I used %percentage reductions, maintaining aspect ratio. I can see that h x w absolute measurements might be tricky in batch mode.
I have a collection of images that vary from 2.5 x 2.5 to 8.5 x 8.5 ( all square ) i need to rezise all of them to print 2 x 2 , its about 3000 images and would take me a few days manually is there any way to do it in a batch ?
View 4 Replies View RelatedIf you can re-size batch images in paint.net, I'd like to know how you usually go about doing that. Just today I downloaded from a blog a some odd 40 game screenshots, in what looked like a standard widescreen resolution. After checking the dimensions on the pictures, I found that they were all 1920x1079...... Being off by 1 pixel is bad, enough to make me go crazy, so I opted to edit them into the 1920x1080 resolution. I found a plugin that would add in a batch re-sizer and it worked. But upon closer inspection, it blurred my original image just slightly. Thats even worse than being off by 1 pixel.
So, I came across this layer saver executable.. I opened all the images in one canvas as layers, re-sized the canvas by 1 pixel, saved the lot as a PDN, then extracted all the layers as a brand new perfect image except for 1 column of pixels. Other than re-naming everything in ordered numbers, it works perfectly. But still, I have to know, is there anything just as good that can be within paint.net?
It would be nice it if it were possible to batch resize a whole bunch of pictures. Could be done as follows:
1. Click on "batch resize.."
2. A window opens wherein you can select a number of images
3. Then choose by how much % you want their sizes to be reduced.
OR:
1. Find and select the images in windows explorer
2. Right-click, and select "batch resize.."
3. See 3 above
I would like to resize and watermark all of the image in a particular file. I understand that I can do this with Lightroom, but I do now know how.
View 1 Replies View RelatedI got over 160 color corrected RAW files from my photographer when I thought I was getting TIf or PSD files. I need to put them into an in design doc to send out for printing. Is there a way to convert all of these in one fell swoop without messing up the work that has already been done?
I didn't allow in my timing to save each one individually since i didn't know I was going to need to do this. I am really unfamiliar with batch processing, so how to best go about this, or if I even can. I am working in Photoshop CS6. version 13.06 x 64.
I have about 300 images (jpg) in a folder. I need to resize all of them. Each file is about 2.2mb. I tried using Action to help out but the problem is I have to keep pressing 'play' for each image and I'm kinda tired and bored by doing all of them. Is there a better way to use Action to do all my 300 without me having to do it one by one?
View 1 Replies View RelatedA simple action.
Â
File>Export>.bmpCloseÂ
Â
If I run the action on one file, it works perfect.
 If I try to run it as a batch, it creates the bmp files fine.
But it also creates either a .ai file, or two .eps files!
Â
Writing one or two extra files signifiantly shows the process down.
Â
After I run the batch it is not hard to simply delete the extra .eps/ai files of course.Â
Â
But writing those files seriously slows the process down, and I have about 89,000 more files to go.
Â
Illustrator CS4. Windows XP
As an organization, we have opted to go with STB as we have some complicated requirements that CTB doesn't accommodate. The wisdom of that decision is a moot point and I'm aware of the vast array of opinion.
We have a legacy of CTB drawings that occassionally need to be brought forward when projects get resurrected (state government highway designs are prone to getting shelved).
Up to AutoCAD 2009, I've had a VBA routine that performed a few operations on a list of files stored in a text file:
- Open the file
- Convert to STB using "CONVERTPSTYLES" with a specified STB file.
- Run a script to load a layer state file to change the plot styles from Style1, Style2 etc, to their correct named plot styles.
- Manage a recalcitrant layer that refused to play ball.
- Save and close the document
- Get the next file........
This was all fine until 2010 came along with the announcement that VBA was to be phased out. 2010 is OK with the VBA enablers, but now I've got some work to do.
Our organisation's development language is C# and I'm using Visual Studio 2008 Professional Edition to develop my C# .NET code.
Is there another mechanism than "SendStringToExecute" for sending a command such as convertpstyles to AutoCAD and getting .NET to wait for it to finish before proceeding.
I've got CommandEnded code that handles waiting for MTEXT and DTEXT commands to finish and I've tried constructing a CommandEnded for CONVERTPSTYLES, but it seems to me that commands that throw dialogue boxes such as CONVERTPSTYLESand SCRIPT aren't handled the same way.
I've tried setting FILEDIA to 0 prior to running the CONVERTPSTYLES command, however the message box that CONVERTPSTYLES presents before asking for the STB file appears to be getting in the way.
I would like to transfer batch commands that I created in CS2 to CS5. these are the commands created under import-batch.  where are those files stored and will cs2 files work under cs5 (or are they version specific)
View 7 Replies View RelatedPhotoshop CS2 & CS3 will not open my NEF raw files {Nikon D300}. Both versions have always opened my raw files. Also, CS3 locks up when I batch resize jpgs.
View 21 Replies View Related