Photoshop :: Renaming Batch Files
Aug 10, 2012
I would like to automate of saving, renaming, closing open documents then placing them in a seperate folder after I'm done adding watermarks to my images. The problem I'm coming across is that the action i have renames all the files using the same name (whatever example/file I used when I recorded the action).
So even though the original file names are 123.jpg, 124.jpg, 125.jpg and I want them to be renamed as 123c.jpg, 124c.jpg, 125c.jpg all of them gets renamed 122c.jpg.
I'm not sure how to do a screen shot, so here is the skinny on what I have done...
Under the Batch window I marked the following:
Play:
Set: Set1
Action: Watermark Save & Exit
Source: Opened Files
Destination: Folder Desktop/Watermarked Pictures
Override Action "Save As" Commands (box is checked)
File Naming: "Document Name+c+extension
Starting serial #1
Errors: Stop for Errors
what I did wrong??
I use CS4 if that matters.
View 3 Replies
ADVERTISEMENT
Aug 17, 2013
When i rename files in batch in Bridge CS6 the extension from my files is deleted, leaving me with exec files. Sometimes the new name is given but the extension disappears and other times the new name i wanted to give my files appears in place of the extension.
I have had this problem for a while in combination with a cache problem (every time when opening bridge it asked me to purge the cache). I seemed to be solved by renaming the cache folder cache_old and creating a new one but now the batch renaming problem has returned.
View 1 Replies
View Related
Oct 18, 2005
I just did a batch rename in CS2 on my Mac from 001 to 300. Everything worked fine except for one thing. Right in the middle of the 300 images PS added the following - 140 (1) to 179 (1). Does anyone know why parentheses were added to that group of images?
View 2 Replies
View Related
Jun 20, 2013
I take pictures of a swim team and I keyword tag each image with the swimmers name. I would like to batch rename and save in a new folder the files so they have the original filename and then the keyword name.
I don't see that as an option in the metadata drop down or any of the other drop downs. Is there a way to do it? I have exported it and included the metadata information and from my PC I can see it in the lower picture data, but I am sharing with a Mac user and it is easiest if the name of the swimmer is in the filename. I have over 1100 pictures and renaming them manually would be too time consuming.
View 1 Replies
View Related
Oct 25, 2013
I have a 4000 images (spread across 5 folders) who's file names are all prefixed with 'Rex_'. I need to remove this prefix but would rather not do it manually. Is there an automated way to do this, where the existing file name remains the same, but the Rex_ is deleted?
I have looked into the Batch Rename element of Bridge but that doesn't seem to cover the deletion of existing file name sections. I am working on a PC using CS6.
View 1 Replies
View Related
May 13, 2013
after batch renaming I can't open in photo shop, jpg seems to have gone. Photos will only open in photo viewer. How can I get them back to jpg?
View 1 Replies
View Related
Nov 2, 2011
I am finding that if I select a range of files to rename that already have numbers at the end, say 1 - 12, it is changing the order of the files and seeing the files numbered 10 - 12 before the file numbered 2. I am pretty sure it didn't work this way in X3.
I don't have X3 installed any longer.
View 4 Replies
View Related
Aug 7, 2013
I need to rename tens of thousands of photos and while I have the batch rename tool working just fine.I'm using custom text and sequential numbering. However, I need a blank space between these two fields. I'm using X4 on Windows 7.
View 1 Replies
View Related
May 28, 2006
I have some photos that I need to partially rename. Example > Currently they are named ABC_0001, ABC_0002, ABC_0003, etc. I only want to change the first part of the name. So I need the names to DEF_0001, DEF_0002, etc. It important not to change the numbers.
The PS Elements Editor "rename multiple files" gives me a lot of options to rename them but it seems there is not a way to leave the numbers in the file names intact while just changing the first few letters.
View 9 Replies
View Related
Oct 12, 2013
I just renamed all my files using Lightroom (select all; rename files)
Unfortunately, this did not rename the correponding xmp files. Since this is irrevercible, I'm now in a tight spot. I'm stuck this thousands of files with "lost" xmp files
(Also, it is very annoying that the renaming changes the file creation dates! This pretty much destroys my backup routine..)
View 21 Replies
View Related
Sep 2, 2012
I want to rename multiple files, but each time I try, it creates two copies of each file, and as they are numbered sequentially, I cannot just delete the extra ones at once. I don't understand why it does this, and how I can avoid it!
View 5 Replies
View Related
Jan 6, 2012
I've got my files set to rename on import
Custom: {Date (YYYYMMDD)>>} {Custom Text} {Import # 01} >>}
However it's putting the import date on the files rather than the capture date.It's only started happening recently (this month) started with video (move) files being set to the date ahead from my Canon IXUS 220 HS
Now it's not importing the capture date for purposes of the file name.The files still say the correct date in Windows.
View 11 Replies
View Related
Mar 12, 2014
I am wanting to name files using custom name sequence...but instead of numbers in the sequence, I want to use letters. Is this possible
ie: 1a.jpg 1b.jpg 1c.jpg etc.
View 1 Replies
View Related
Jun 28, 2010
I had a second shooter for a wedding who uses Nikon (I'm Canon) and now I'm trying to rename her files in LR 1.3 Library mode and I get the following message:"Some photos will not be renamed because they are missing or not writable."I know they are not missing because I have them and have edited and worked on them in LR, so that leaves "not writable."What does that mean and what do I have to do to be able to rename these files?I've never had this problem before (she worked another wedding for me and gave me .NEF files and I had no problem).
PS: I know I need to change over to LR3, but right now I'm still in LR 1.3 until I can upgrade.
View 14 Replies
View Related
Feb 18, 2014
I am getting the wrong date when I rename files in LR5. How do I fix it? I hae always used a custom preset date (YYYYMMDD)_Custom Text_Sequence #(0001) Everything works except the date. What I get is 20130128 I am using a Nikon Df . I checked the date and time and it is set correctly.
View 1 Replies
View Related
Aug 4, 2013
I'm using LR 5.0 in a Windows 7/64 environment.
1. When attempting to rename a folder, why do I get this message: "The folder XYZ could not be renamed or moved."? It only happens to certain folders but not others. I may come back to that folder several days later and the problem won't reoccur.
2. When moving a group of files from one folder location to another, all but maybe one or two will move. Although I receive an error, I try moving those two again, and they move normally.
View 1 Replies
View Related
Dec 23, 2011
Every time we have the file dialog boxes open and try renaming or any other explore action beyond changing folder location and hitting the save button AutoCAD LT will hang and crash. We have tried starting the file operation and then just canceling and it does the same exact thing. What happens most of the time is the user will be working on a file and need to save it. They click save as and will go into the folder and right click and rename an existing file to a backup name and then hit save. It proceeds to crash instantly and the document doesn't get saved. It doesn't seem to matter the name of the file or folders or if it is a rename or delete operation. It seems to be related to bring up the explorer options within AutoCad honestly. All of our computers do the same thing.
View 9 Replies
View Related
Nov 2, 2012
I am using Design Assitant to rename files, but have had no luck with other referenced files.I have followed the Procedures from AutoDesk WikiHelp.
1. Open Top Assembly.
2. In the top browser, I select the part and set Action -> Rename.
3. Rename File.
4. In the bottom browser, I select the file types for additional referenced files.
5. I select (highlight) all the files.
6. Click "SAVE"
When I go to open the files, to check if the changes have been made, obviously to rename works on the Top Assembly,BUT for other additional referenced files, it doesn't.
I am doing this in a Single User Project.Just wondering if there are other steps that need to be done to use Design Assistant properly.
View 9 Replies
View Related
Nov 11, 2013
I got over 160 color corrected RAW files from my photographer when I thought I was getting TIf or PSD files. I need to put them into an in design doc to send out for printing. Is there a way to convert all of these in one fell swoop without messing up the work that has already been done?
I didn't allow in my timing to save each one individually since i didn't know I was going to need to do this. I am really unfamiliar with batch processing, so how to best go about this, or if I even can. I am working in Photoshop CS6. version 13.06 x 64.
View 2 Replies
View Related
Dec 20, 2012
A simple action.
File>Export>.bmpClose
If I run the action on one file, it works perfect.
If I try to run it as a batch, it creates the bmp files fine.
But it also creates either a .ai file, or two .eps files!
Writing one or two extra files signifiantly shows the process down.
After I run the batch it is not hard to simply delete the extra .eps/ai files of course.
But writing those files seriously slows the process down, and I have about 89,000 more files to go.
Illustrator CS4. Windows XP
View 1 Replies
View Related
Nov 19, 2009
As an organization, we have opted to go with STB as we have some complicated requirements that CTB doesn't accommodate. The wisdom of that decision is a moot point and I'm aware of the vast array of opinion.
We have a legacy of CTB drawings that occassionally need to be brought forward when projects get resurrected (state government highway designs are prone to getting shelved).
Up to AutoCAD 2009, I've had a VBA routine that performed a few operations on a list of files stored in a text file:
- Open the file
- Convert to STB using "CONVERTPSTYLES" with a specified STB file.
- Run a script to load a layer state file to change the plot styles from Style1, Style2 etc, to their correct named plot styles.
- Manage a recalcitrant layer that refused to play ball.
- Save and close the document
- Get the next file........
This was all fine until 2010 came along with the announcement that VBA was to be phased out. 2010 is OK with the VBA enablers, but now I've got some work to do.
Our organisation's development language is C# and I'm using Visual Studio 2008 Professional Edition to develop my C# .NET code.
Is there another mechanism than "SendStringToExecute" for sending a command such as convertpstyles to AutoCAD and getting .NET to wait for it to finish before proceeding.
I've got CommandEnded code that handles waiting for MTEXT and DTEXT commands to finish and I've tried constructing a CommandEnded for CONVERTPSTYLES, but it seems to me that commands that throw dialogue boxes such as CONVERTPSTYLESand SCRIPT aren't handled the same way.
I've tried setting FILEDIA to 0 prior to running the CONVERTPSTYLES command, however the message box that CONVERTPSTYLES presents before asking for the STB file appears to be getting in the way.
View 1 Replies
View Related
Oct 4, 2012
I would like to transfer batch commands that I created in CS2 to CS5. these are the commands created under import-batch. where are those files stored and will cs2 files work under cs5 (or are they version specific)
View 7 Replies
View Related
Aug 27, 2012
Photoshop CS2 & CS3 will not open my NEF raw files {Nikon D300}. Both versions have always opened my raw files. Also, CS3 locks up when I batch resize jpgs.
View 21 Replies
View Related
Nov 12, 2012
Im in the process of upgrading from CS5 Design Standard to CS6 DS. I had no problem copying my custom InDesign workspaces from the earlier version to the new version.
What I'm having a hard time with, is how can I get the batch files I use in Photoshop CS5 to copy over to the current version? I distinctly remember doing this when I moved from CS4 to CS5, but for the life of me, I can't remember how I did it, and I've been looking all over the Internet with no success.
I'm on OS 10.6.8 (I know it's old, but everything works beautifully, and I'm not gonna move to ML until I absolutely have to…)
View 2 Replies
View Related
Feb 27, 2012
Process a batch of files?
View 5 Replies
View Related
Mar 18, 2009
I made an action that opens, resizes, saves and closes files. I loaded it into "file>automate>batch" and designated both source and destination folders(which are different). For some reason the batch processed files are not saving to the designated destination folder specified in the batch gui.
How can i correct this?
View 2 Replies
View Related
Jan 29, 2009
I am using Bridge and Photoshop CS3. I have dozens of raw files that need to be saved as .tifs. They don't need any adjusting; just a simple save as tif. Is there a way to do that in one batch without setting up my own action?
View 1 Replies
View Related
Mar 9, 2005
I have a folder (over 500) of high res tiff files which are pictures that our advertisers use in there adverts.
I need to create low res jpgs of every image, is it a case of manually doing each indivdual file or can a batch process them.. if so how?
View 1 Replies
View Related
Feb 15, 2009
What I'm trying to do is create almost 360,000 files from scratch. You know, doing this by hand on my own would take a year. I know there is a way to batch create those files in photoshop from scratch. I know how to work with the batch function if I want to, let's say, convert 300 images. That's easy. But how do I create multiple images from scratch? Code:
View 4 Replies
View Related
Jul 13, 2012
I want to save space in my external hard drive by converting RAW files to DNG files. How to create an action for batch processing these files.
View 7 Replies
View Related
Feb 25, 2008
I'm trying to resize a batch of a few hundred PSD files to 1000 pixels in height, keeping to the individual ratio as they are not all the same.
I thought that the image processor could do it, however it asks to specify a width value which would distort most of the images.
Various freeware batch utilities don't support transparency and flatten the PSDs so that won't do either.
View 3 Replies
View Related
