I'm trying to add a logo graphic to multiple images as an action but can't figure out how. The graphic doesn't show up. Can anybody help me out there?
Steps I've taken:
1. open psd file with the graphic layer
2. open an image to have graphics added
3. resize image
4. drag graphic layer to image
5. save as jpeg
6. close image
The image that I initiated the action with, shows the logo.
way to make a action tha't makes a signature automaticly to my photos
i got the canvas action but when i insert the text in the action it starts in the middle and it's flatent there and i need it to be in the lower right corner.
i would love to be able to create a single photoshop action for adding a border, plus a signature in the bottom right corner, that works for both portrait and landscape images.
need i say more?
i already have an action that adds a signature in the centre of the border at the bottom of the image e.g. the image below. what i want though is for that signature to be on the RHS and for the same action to work for portrait images as well.
supplementary info: reason for this is that I want to be able to export 300 wedding images (mix of landscape and portrait images) from lightroom in my pre-selected order (meaning the files are labelled from 001 to 300, ordered according to how the wedding day unfolded) and then use PS to add the border and the signature, in the same place, and for it to work for both orientations.
i need this to work for full sized exported jpeg images, i.e. i want the files that i give on CD to my clients to include my signature in this manner. so I don't want to copy the initial layer and then reduce the second layer size to leave a border around the second layer.
i hope i've been clear I think that this sort of presentation makes such a difference to final printed image, and I DONT want to have to go to all 300 images picking out the landscape from portrait ones (although this may be what I have to do and wouldn't really take that long but surely there's a better way!!!!).
I'm doing about 200 Illustrator drawings that come from a PDF document. I've created an action that resizes the placed artwork and moves it to the correct location on the artboard. I tried adding the "Embed Image" command to the action with no luck. Is there a way to do this with a script or shortcut?
View 9 Replies View RelatedHere's what I want the action to do:
Clear the selected object
Fit the Artboard to the Selected Object
Save for Web and Devices
I can get it to clear and save but I'll be darned if I can get the Fit the Artboard to the Selected Object to register in the recording of the action. No matter what shortcuts I use, menues I use it just won't record it. Is this just a thing Illustrator won't do or any I just missing something?
I do those 3 things listed above ALL the time and it would be nice it I could make those 3 things into 1 action, then add that action to a hot key on my tablet.
I have integrated a live action image plane into my virtual newsroom set. adding shadows to the talent that are in the image plane?
View 3 Replies View RelatedIm trying to use the add point tracking feature in the MK/Gmask in action. Is this a bug or has the software changed? I used to be able to add a tracking point, scrub media to where the point falls off, select add, hold down control and move the tracker to a new point and it would work fine.
Today no matter what I do when the tracker jumps to the second selected position it just jumps off screen. It even does this if I dont use the add function and stop a track, move to new location and hit snap? Whats up with that?
I'm trying to create an action to place graphics on tshirts to mock up some products, how can i customize my action so that it asks what graphic (image file) i want to place each time the action is run?
View 1 Replies View RelatedMy project: I want to create a drawing based on a photo. The usual way is to place the picture on the working space in Draw and fix it there.Then draw all parts I want to have in my copy.Problem: I can't always really see what I am drawing.
Now my question:Is there a possibiltiy to "calk" a drawing to different coordinates than above the picture itself?For example: The photo is on the left, I "draw" above the picture and the drawing action, e.g. the stroke, happens right from the photo. The y-coordinates of the copy could stay the same while the x-coordinates are x plus a certain value.
In X5 I had it set up so I could re-size proportionally and it was right under where object properties is now in X6. How I can get my workspace so it's there again? Or at least where I can find the tool that re-sizes proportionally?
View 15 Replies View RelatedI have realised that I did not check the TTF filter on install
Do I have to re-install the whole program again or is there an easier way of just adding it in afterwards. FYI: the TTF optionis not in my Global Filtr Settings list to ad or remove.
I am currently using AutoCad 3d 2011 and i am trying to add some graphics (bmp. or jpegs) to surfaces. In model space when materials are on the graphics are there. When i go to render in the graphics come out grey. However if i change the lighting settings to American lighting units the graphics then appear when it is rendered. Why is this? I do not like using American units as it always makes my renders appear washed out.
How graphics can be seen in any of the other lighting units? or why this may be happening?
Wanting add a font to X3 using Vista I've downloaded, extracted but does not see it in X3 so how do I get into X3.Looked in archives for same but no find, stuff like adding in bullets is all, finding using Ctrl+F11.
View 5 Replies View RelatedIn CDraw X5 I can choose line styles. But I would like to add some more styles (and to remove some that I never use).I only found a possibility to create new styles based on a kind of a pixel approach: A one-by-many array of single squares can be marked to be coloured of white, producing dashed lines with any kind of dash length.Also, the dash "frequency" seems to be dictated by the line width only; I do not manage to make thin dashed lines with a reasonably visible dash frequency.
However, I would like to make line consisting of other shapes, like circles, triangles, diamonds, etc., either filled or "open". Or make thin dashed lines with user-specifiec dash and space lengths that do not change when changing the line width. Is this possible?
Also, multi-colour dashes – with e.g. odd-numbered dashes in one colour and even-numbered ones in another color – might be useful.
In the current version, however, the number of dash schemes available is big enough to be confusing. Especially when the line is made relatively wide – say, 0,5 .. 1 mm or so – and I want to make more lines with the same shape, than it is difficult to find again the same shape the list of standard shapes. Is it possible to add names (or numbers, but not just running numbers!) to the shapes, so that a shape can be found again easily?
Any good macro for adding the date and the file name to a page? i've had a hunt on the net but haven't found anything that works with X3, even tried Oberonpalce.
View 12 Replies View RelatedI copied an Image off the web and am trying to ungroup it and change the the Black images to color...
View 5 Replies View RelatedI would like to have a quick way to access some T-Shirt proof images quickly.
What is the best way? Toolbar, docker?
I saw the scrapbook docker, but then I have to scroll through all my files. Not sure if it remembers a folder on open and close..
My document palette adds the same colors that are NEVER in my art every time. I swear it's a glitch. The colors are so bizzare. And when I go to delete any of them, it says I can't because they are in use. But they are for sure not being used.
Here's a list of the colors:
Black A0QM, Pantone 142, Black A0QM (1), Black A0QM (2), Black A0QM (3), DIC 2287p* (1), PANTONE 142 (1), Black A0QM (4), PANTONE 142 (2), Black A0QM (5), Black A0QM (6), Black A0QM (7), DIC 2287p* (1) (1), PANTONE 142 (3)
That's the order they are always in. I don't even know where you would get any of those colors and what they would be used for? Except the Pantone of course.
Is there a way to add logos to Text Rolls in Smoke? I'm doing a roll for a feature and need to add company logos and grfx to the end of the roll.
View 2 Replies View RelatedI had been using 2.8.0, adding some text to graphics. I came back from a brief break, and the next time I added text, the font was extremely narrow, to the point that it was illegible.
At first I tried simply shutting GIMP down and restarting. No such luck. Next, I uninstalled GIMP, then I ran CCleaner to get rid of any residual files and settings, then I reinstalled GIMP, still using the 2.8.0 Windows installer, and still, the issue persisted.
** EDIT ** I tested ALL fonts, the problems happens with each one.
So I uninstalled again, did the CCleaner thing, then downloaded and installed 2.8.8, and the problem still persists.
Again, fonts and texts had been working without an issue all day. I stepped away from my PC to get food. There was no one in the house that could have messed with any settings, no pets to accidentally press keys or anything like that.
I am at a complete loss. I've looked at every possible setting I could think of that could possibly impact how fonts are rendered, and changing settings still does nothing.
I have found an inconvenient workaround for this problem, but at least I can now get some work done.
The problem still occurs when I try to insert text into an EXISTING image, but if a create a NEW IMAGE with a background color, text displays and renders as it should. If I choose a transparent background, I still get the problem with the text rendering too narrow to be legible.
So something about existing images and/or transparent backgrounds contributes to this issue. But as long as I create my text layer in a new image, I can then just copy and paste that layer into the image I want to edit, and I can even edit the text once it has been pasted without problems.
Still, this is very inconvenient, especially when I am trying to place text in precise positions.
I have an object that I want to have a background so that the contents under it cannot be seen. Is there a way to do this without having to draw a new shape?
View 7 Replies View RelatedHow can I make an imported scan of a line drawing "transparent" and add color fills to various sections, using the freehand tool ? I have done this many times with an older version of CorelDraw, but in CorelDraw- x5 the
imported scan includes a white background (even when I select NO FILL), so that my freehand tool selections are either on top of, or hidden behind the white background.
I work in a print shop. We do a lot of work with a printing press as well as our digital machines. Whenever we design something digitally that has grayed areas or logos, and we want to print it using our press, we need to make sure the shaded areas have "dots" so that the ink from the press will spread evenly.
In CorelDRAW X4, I used to to have it sent to the general PANTONE uncoated palette. After selecting the gray area, I would double click the color box at the bottom right, bringing up the fill window. From here, I selected the Options drop down menu, then PostScript Options. Here I could set the dots and the frequency.
Now that we've updated to CorelDRAW X5, the palette options are quite different. I want to have one centralized PANTONE unocated set that stays for everything I work in. And the big problem, is that when I do find a good gray to use (after clicking through way too many choices), the PostScript Options is grayed out and can't be clicked on.
Sure wish you could manipulate the Column Offset of an Array Action with a Stretch Action.
CSHADEDESIGN|AUTOCAD LT|LT-KB|DYNAMIC BLOCKS
I have created a dynamic block with several visiblility states. The block works great for what I need it for. however, I am trying to add one more action to the block but am having issues.
This block is essentially a 24" retail cabinet with the visibility states showing the different drawer and shelf configurations. I want to be able to lengthen the cabinet in 24" increments and have the visibility show for each 24" section.....e.g. I want a 10' cabinet so I bring in the 24" starter block. Then stretch the cabinet to the 10' mark, then I can chose any drawer/shelve config for each 24" section (they are all different).
I can get the block to stretch in 24" sections....no problem.....i just want the visibility state to be duplicated as well for each section. Now as it stretches, there is only one Vis state and it only populates the first cabinet.
I could do this by copying the block over and over 5 times.....but I am hoping there is a way to make this dynamic.
i am trying to build an action where the end product is a channel listing that has all the channel (R-G-B-L-C-Y-M-K (forget LAB a-b)). this will allow me to look at all the channels for contrast and subsequent extraction. i'm actually able to do this as i RECORD the action. but when i RUN the action, nothing happens.
in recording the action, i create a DUPLICATE IMAGE, then convert the new image to LAB. i then drag the "L" channel to the original image. it goes into the original image as an alpha channel which i rename to "Lightness." i then convert the duplicate image to CMYK and then one-by-one DRAG the individual channels to the original image. at the end of this process, i have all eight channels visible in the channels palette. this is what i want.
but then, when i RUN the action on a new image, the action fails to RECORD the "drag step and drop" step. the "L," "C," etc. channels are not dragged during the running of the action.
why does the "drag" step not record in the action
needs to overlay a grid over a photo and then save it as another file. In CS5.5 or earlier, no problem, but in CS6 it is not working for either of us.
The batch action (run from either Photoshop or Bridge) stops and prompts at the Save command every time no matter what format we save it in (psd, png, jpg, save for web, etc.).
I have been through the Web and the Adobe Forums and cannot find a work around for this. He cannot just hit enter everytime the popup window comes up because he has over 2700 photos to put this grid on.
I have downloaded a free page curl action for Photoshop CS5. Is there an easy way to run it without all the steps i.e. with one click if my image size is constant?
View 3 Replies View RelatedI was running an action on several hundred images and occasionally a notice would pop up saying 'Action Not Available', but it was still working. Anyone seen this and know why?
View 9 Replies View RelatedI had an action which I used a lot. It put a horizontal and vertical guide
on the center of my canvas.
Unfortunately I lost my hdd and did not have a backup copy of this action. I have searched as good as I could bu cannot find anything.
Last year I made X-mas cards and would put a barcode on the back for a realistic look. I used to have an action that I downloaded before that did the barcodes, but I some how lost it.
View 1 Replies View Related