I'm trying to create an action to place graphics on tshirts to mock up some products, how can i customize my action so that it asks what graphic (image file) i want to place each time the action is run?
View 1 RepliesI really want to create 360 degree views for my products. I can take the images no problem but need to stitch them together. Is this even possible with any Xara products? This is the kind of thing i'd like to do. [URL]
View 2 Replies View RelatedI've received two orders of CDs for a client, and in the printed artwork there are some flaws that have me wondering what to do to avoid this.
Files were submitted in PDF format with text converted to curves. I believe the artwork is then imported into AI at the other end before going to print.
Along the edge of an object with a drop shadow, there is a fine white line showing. On the two products with identical artwork, the line shows on different edges, but appears to be where the drop shadow ends.
In other spots, there is what I would call "scratches", where, within an image there is a fine white line. This is not an edge or overlap, so I'm at a loss for this.
In another place, one character in a word essentially did not print. So I'm wondering what my "best practice" would be to avoid this. Should I "flatten" everything when I'm done, essentially converting the entire page to a single 300DPI bitmap?
Should I include text in the flattened bitmap, or is it best to leave as curves? My gut says leaving as curves preserves maximum resolution, but does it matter if it is not being scaled?
I've never before had issues with getting artwork printed from PDFs. In most cases, I imagine the print is created directly from my submitted PDF.
I have a Photoshop action that, amongst other things, performs various fill-type operations on parts of an image. I want to run the action on a number different images, but I need to select different parts depending on the image.
Is there a way that I can manually position the cursor (i.e pick the correct area to process) while running the action? Or do I have to break the action up into shorter actions and do the fills manually in between?
I'm looking for a workflow to create web mock-ups in the most efficient and easy way.
What Im looking for is to take an existing web frontend page and tweek it with new sections and components like buttons / menus / new text areas,images etc etc...are there any specific tools or "web galleries" to use for this purpose that I can incorporate into CS6....not really sure how to form this question in the right way but I hope this sort of exaplined my purpose....creation of good-looking web page design (even if it will jsut be in .psd format)
for a web designer for designing a Mock-up for a web site(page+subpage+specialpage), what from Adobe PS required? eg. Selections, Layers, Slicing, Guides, ... knowledge, well, is it needed anything else? I a reader ADOBE PRESS CIB PS CS6 BOOK.
View 2 Replies View RelatedI've been downloading a few mock-ups to use in my portfolio and I want to start to make my own for some that I can't find on the web. I've manages to make a realistic looking asset for what I want, but I don't know how to add text and stuff to it. Usually, when I open a downloaded mock-up PSD I just double click on the smart object, edits the contents hit save and BOOM done it's at the perspective for whatever I am changing.
Â
However, I've made smart object and I'm trying to edit the contents so when I double click it just opens the object again and whatever I ad will add, but it doesn't save at the perspective. i How do I make a smart object to edit contents (text, images, logo, etc etc) on a plain PSB or PSD so it saves at the angle or perspective I want?
Â
This is my design before I double click on the smart layerÂ
Â
Here is the image when I double click the smart layer (not exactly what I want).
Here is a mock that I downloaded after I double click the next pictures show's what I want. Â
Â
This is what I want to do in my original design, but how do I get the text to do this with a smart object?? I want to edit text in my design and apply it (not necessarily this design, but my own) to my smart object (first image) I created in photoshop. How do I do this?
I'm trying to add a logo graphic to multiple images as an action but can't figure out how. The graphic doesn't show up. Can anybody help me out there?
Steps I've taken:
1. open psd file with the graphic layer
2. open an image to have graphics added
3. resize image
4. drag graphic layer to image
5. save as jpeg
6. close image
The image that I initiated the action with, shows the logo.
I'm trying to create a website mockup in Photoshop. I'm trying to create a bounding box where I can place my text,. Can I do this in Photoshop elements 10 or just Photoshop cs5? If I can do it in Photoshop elements 10, what tool do I use and can i make the background transparent?
View 1 Replies View Relatedi have 2 questions:
1) how can i create water?
2)how can i place sunglasses on somebody's face?? i meen i can't get it perfect.
I have a photoshop file with several layers...about 100. I want to put each layers into it's own group. The name of the group must be the same as the name of the layer.
Â
I tried creating an action to do this but it did not work right. It only works for one layer selected individually. If I select multiple layers, then it forms nested groups. How do I create this action? I am using adobe photoshop cs6 ( I think) , windows 7.
Decided to download the trial version of CS6 and create some actions for myself. What I need to create is a 3d canvas wrap image as seen in the pic.I need to be able to control the following.
Â
1, The size of the canvas
2, The depth of the frame
3, To have the image mirrored on the sides of the frame.
4, Shadow effect
I am new to creating actions, I have crated a design I am happy with and I want to recreate it easily with an action. The design uses multiple stages and filters, so its a real pain to retrace steps. Is there a quick way to create an action set without having to go through all steps again?
View 2 Replies View RelatedIm trying to create a watermark action set. I have my watermark made and set to 30% for this particular set of images. When I paste the watermark on an image it comes into the new image at 100%. How do I get the opacity to remain consistant from document to document?
View 2 Replies View RelatedI have 200 tiffs in one folder (each tiff is named 'image 1-200') all without an alpha channel.
I have 200 different tiffs in another folder (named 'luma matte 1-200').
I've have copied the first images of the 'luma matte 1.tiff' (a black and white image) and pasted it into a newly created alpha layer in 'the image 1.tiff' channel window.
I save this out as a new tiff called 'composite 1' and it works in the way I require it to work.
How would I automate this process rather than having to do it individually for all the 200 files. I'm not sure if this can be done with a series of actions/batch? I dont want to use After Effects luma key as this isn't giving me the correct results.
I'm trying to simplify the creation of several preview thumbs from one image. For example, my base image is a 400x600px image, and from this image I need to create the following thumbs:
1: 90x120px
2: 120x90px
3: 100x100px
4: ...
(Please look at the image i attached)
I need an Action that would Crop the base image and save a copy of each of these thumbs. I can't fugure out how to do this since I need to adjust the Marquee selection for each thumb to Crop the part of the base image I want.
I want to create an action to apply to several images. This had to be the result. But I want to use the action for a portrait or landscape image or 72 or 300 dpi picture.
View 5 Replies View RelatedAnyway, my quest is to create an action in CS3 that will position and size text (eg. center) as a watermark in any size image. Currently I am creating a copyright symbol, then a text layer and then another text layer and either grouping them in the action or merging them down as created to be in one layer. This works fine as long as I run the action on another file of the same size but when it comes across a different size file the components are all over the place and differently sized.
I gotta admit I don't know a lot about text though. Just thought someone may be able to help me with this one so thanks to all who contribute.
I would like to automate the creation of a frame with top rounded corners around images as shown in the image below. The rounded corners should always be the same size and angle no matter the size of the picture.
I'm having problems creating and recording a suitable photoshop action that would work for any picture dimension and that won't resize the top rounded corners.
I have a logo consisting of four (4) text elements (see attachment) that I would like to be able to create through an action. The problem I'm having is that the document is not always the same size and PS sees percentages for text placement. I need to have the text placed in relation to each other regardless of the documents size.
View 7 Replies View RelatedI would like to automate the creation of a frame with top rounded corners around images as shown in the image below. The rounded corners should always be the same size and angle no matter the size of the picture.
I'm having problems creating and recording a suitable photoshop action that would work for any picture dimension and that won't resize the top rounded corners.
Is there a way to create an action in PS CS3 with the ability to type different words in the middle of the action?
For ex, I have a series of steps, then need to save the image to 2 different sizes/resolutions, with a different name. So I want the action to run, stop where I type in the name for the hi-res, continue, then stop where I type in the name for the lo-res, then finish the steps desired.
Vista 64bit / Photoshop CS4 Friends - I'm struggling to create an action that will insert a length and width size (3840 x 2160) in the crop dimensions? Simply, I go through the steps to create the action and nothing happens when I try it.
View 7 Replies View Relatedhow do i create an action for use with the batch tool?
file - automate - batch... and i can't de-select "default actions.atn." i need to create a custom action to boost the dpi of my tiff images....
I have a problem with the Actions of Photoshop, I wish you can help me: I need to put a square box (or a point, some kind of mark) in the corner of the bottom-left in hundreds of images, so I think an Action is the best way to do it but I don't know how can I do it, because I need that the mark can adapt itself to the size of each image: it have to be the 5% of the size of the original image.
View 4 Replies View RelatedI need to create an action to resize several hundred horizontal images. Each image must be sized to a specific width and then cropped to a specific height. When I crop the image, I need to adjust the cropping box to accommodate the image content. Then I will save the image as a new file.
Â
How do I a create a pause in the action so I can position the crop manually before I save the image?
I want to create an action that only opens one particular file type, performs some changes to it, then finds all the others of that file type. I can do everything else and use the Image Processor to run it, but I can't find any way to tell the action to only open .GIF files and ignore everything else.
View 2 Replies View RelatedJust tried to automate a batch and resize, and then save for web all of the pictures - it didn't work the way I wanted (probably recorded something wrong). But When I tried to rerecord the action - it became impossible to change size of the pictures. I already restarted my computer, but the function of size changing still isn't working.
View 6 Replies View RelatedI would like to create an action where a user is able to choose from a particular set of patterns (created by me) and excluding all the others (that may be present otherwise) from view. My action is currently working either from choosing from the whole pattern set (using insert menu item in the action), or a single pattern of my choice. (no insert item menu used).
Â
I want the user to choose from my set of pattern in this particular instance but not the others that are currently in the presets.
Â
I had the idea of making the action replacing temporarily the patterns with my set (replace patterns in the drop down menu) and then reset or load the user's set at the end of the action. It made me think that maybe people wouldn't want me to mess with their presets in an action.
Â
I am currently using PSCS4.
Â
I can either use a new pattern layer or a new "blank layer" with a pattern overlay (layer style)
Â
I am really looking for a spark that'll light my Eureka moment.
I will be working on a project soon where I will have to change the fill color and header overlay for about 128 images. I know how to create an action to change the header, but I don't know how to make one that changes the fill color. I have a list of each hex code for each image on a spreadsheet. Is there anyway i could create an action to read the information from that and create each image accordingly?
I would do it by hand, but I anticipate getting several projects of this type in the future, so I would like to automate as much as I can!
I don't want a greeting card template. I can create the cards just fine. I just want an action to create an image of a greeting card. I've scoured the net and can find actions to create business cards, book covers, magazine covers, ..... but none to create greeting cards.
View 9 Replies View Related