I have an object that I want to have a background so that the contents under it cannot be seen. Is there a way to do this without having to draw a new shape?
View 7 RepliesI have problem with publishing my work in PDF. I have vector background (in thin stripes like) and several polygonal bitmap objects on it but in the PDF-file everything under the bitmap objects is bitmap also... And the stripes (of my background) are very ugly and jagged - part vector, part bitmap...
Could I complete that work correctly in CDR or have to search some other resolution?
have number of curved objects which makes a design but goes in straight way. what i want is to follow that grouped objects to a curve .
Power Clip option is not suitable for me as it reposition its original state. is there any other option which can make it in better way.
I'm creating two websites for two different clients, and both gave me scanned copies of their logos. I converted them to GIF, JPG, BMP and PNG (from MS paint program), followed all the directions found online in various combinations to remove the white background from these logos. Here's a sample of what I did:
import logo; edit bitmap; change background; used magic wand on white areas; close paint & export doc. I've tried various combinations of clicking on options like transparency, masking, changing the tolerance and nothing works.
On one the white background simply won't go away after saving to my desktop, and on the other there is a grey/white checkerboard pattern on the background.
When it's all said & done, I need to upload these to Wix.com as a PNG.
I'm at my wits end been trying to do this for two days after work, wondering if Corel is even capable of doing this, or if my clients' logos are just unusable or if I'm just losing it.
I have been getting an immense number to images lately that have that wonderful white background.
I simply use the masking tools and cut/paste back into Draw to get a transparent background, but it is time consuming.
Any way to do this with Replace Colors?
I can change page backgrounds to a darker color. the background of the whole workspace is really bright white, is there any way I can change the entire background to a darker color like neutral gray...like the Photoshop background workspace?
View 10 Replies View RelatedI have a light pink background behind an image which I would like to turn pure white. How can I select the image and white out the background without changing the image? None of the mask tools seem to have any effect.
View 1 Replies View RelatedQuick question, I just created a logo and I'm wondering if there is a way to export the logo into jpeg without the white background. I create posters for my husbands business and it will not be a problem when i add our logo to our posters because I can just remove the background myself.
My problem will be when I have to send the logo to other companies, they usually ask for the logo in jpeg. I've already exported the logo into a jpeg but of course the white document background appears. Is there any way to export ONLY the logo into a jpeg?
CorelDraw_ExtendedLines.JPG
I have a time consuming problem that I was hoping a work-around or solution could be found for.
Some background: I use CorelDraw sort of as a CAD file creation software. The tool I use traces out straight, horizontal and vertical lines. At times, there are areas that need to be excluded being processed over, so my design has holes and gaps in it. The tricky part is, the tool I use needs time to accelerate up to full speed before I want it to start it's process. This requires that I add the same length to every single line in the layer (different layers need different added lengths). The problem that I run into, is that if I select multiple groups of lines that are not the same length and try to extend them, CorelDraw sees them as one group and extends the largest lines the right distance, but shorter lines get a different percentage of the distance, and gaps get shifted. I put in pictures of what I am talking about (a before, a good, and a bad).
can I select all the lines in a layer and tell CorelDraw to add X length to all of them, while keeping their center positions the same? It would save me a good deal of time.
I am new to X4 and cannot seem to get rid of the white background when I export a vector to a jpg file. This is probably a no brainier but I have tried setting the page background to none and a few other things but to no avail.
View 4 Replies View Related[URL] I have a corelDraw clipart, there is a white background, and I can't smart fill it wil transparent.
it's CGS06094.crd
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
I need to remove a background from an object which I have imported into Photo Paint and by using the Wand have removed the white background. But when I go to export it and save it as a png file it puts the white background back in with the saved file. I need the object to have a transparent background so that I can place it overtop other objects and not see the white of the background.
View 3 Replies View RelatedI need to remove a background from an object which I have imported into Photo Paint and by using the Wand have removed the white background. But when I go to export it and save it as a png file it puts the white background back in with the saved file.
I need the object to have a transparent background so that I can place it over top other objects and not see the white of the background.
If I covert a font or shaped image under Bitmaps=>Convert to Bitmaps, I get a white solid background. In Corel x5 this would be a clear background. Also I can no longer Cover to Bitmap a photo then open with bitmap editor to create rectangles or ovals with clear faded edges. These are items I use all the time. How do I achieve this now. Also x6 will not save in x5 version. It will warn me of potencial problems then fail.
View 4 Replies View RelatedI need to find a way to add "perspective" to grouped objects that include a bitmap and other drawn objects. I can convert everything to a bitmap in needed. What I need this for is I engrave this grouped artwork onto drinking glasses and I have to adjust the artwork for the differences in the diameter of the glass. I need to be able to set the width of the top of the artwork with a numeric value and the bottom with a different numeric value.
An example of the problem with the engraving is that if I wanted to engrave a one inch square half way down the glass I would have to make the top of the square 1.1 inches wide and the bottom of the square 1.2 inches (the math is not right with this example) so a trapezoid turns into a square once engrave on the tapered glass.
The image below shows a sample of the artwork I need to engrave. The right side image is an exaggerated example of what the artwork would need to look like to work right once engraved. I could only adjust the black ring but not the text or image in the center. The third image is to show a trapezoid.
In X5 I had it set up so I could re-size proportionally and it was right under where object properties is now in X6. How I can get my workspace so it's there again? Or at least where I can find the tool that re-sizes proportionally?
View 15 Replies View RelatedI have realised that I did not check the TTF filter on install
Do I have to re-install the whole program again or is there an easier way of just adding it in afterwards. FYI: the TTF optionis not in my Global Filtr Settings list to ad or remove.
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View RelatedIs there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Is it a bug? I tried it with X6, X6.1 and X6.2
Wanting add a font to X3 using Vista I've downloaded, extracted but does not see it in X3 so how do I get into X3.Looked in archives for same but no find, stuff like adding in bullets is all, finding using Ctrl+F11.
View 5 Replies View RelatedIn CDraw X5 I can choose line styles. But I would like to add some more styles (and to remove some that I never use).I only found a possibility to create new styles based on a kind of a pixel approach: A one-by-many array of single squares can be marked to be coloured of white, producing dashed lines with any kind of dash length.Also, the dash "frequency" seems to be dictated by the line width only; I do not manage to make thin dashed lines with a reasonably visible dash frequency.
However, I would like to make line consisting of other shapes, like circles, triangles, diamonds, etc., either filled or "open". Or make thin dashed lines with user-specifiec dash and space lengths that do not change when changing the line width. Is this possible?
Also, multi-colour dashes – with e.g. odd-numbered dashes in one colour and even-numbered ones in another color – might be useful.
In the current version, however, the number of dash schemes available is big enough to be confusing. Especially when the line is made relatively wide – say, 0,5 .. 1 mm or so – and I want to make more lines with the same shape, than it is difficult to find again the same shape the list of standard shapes. Is it possible to add names (or numbers, but not just running numbers!) to the shapes, so that a shape can be found again easily?
Any good macro for adding the date and the file name to a page? i've had a hunt on the net but haven't found anything that works with X3, even tried Oberonpalce.
View 12 Replies View RelatedI have a logo I am working on and it has too much white in the logo. get rid of all the extra white in the logo.
View 1 Replies View RelatedI copied an Image off the web and am trying to ungroup it and change the the Black images to color...
View 5 Replies View RelatedI would like to have a quick way to access some T-Shirt proof images quickly.
What is the best way? Toolbar, docker?
I saw the scrapbook docker, but then I have to scroll through all my files. Not sure if it remembers a folder on open and close..
My document palette adds the same colors that are NEVER in my art every time. I swear it's a glitch. The colors are so bizzare. And when I go to delete any of them, it says I can't because they are in use. But they are for sure not being used.
Here's a list of the colors:
Black A0QM, Pantone 142, Black A0QM (1), Black A0QM (2), Black A0QM (3), DIC 2287p* (1), PANTONE 142 (1), Black A0QM (4), PANTONE 142 (2), Black A0QM (5), Black A0QM (6), Black A0QM (7), DIC 2287p* (1) (1), PANTONE 142 (3)
That's the order they are always in. I don't even know where you would get any of those colors and what they would be used for? Except the Pantone of course.
I'm very new to corel and i just finished designing a poster but i need to add logos. the problem i'm having is that they're in jpeg and they have a white background. i need to remove the white background. i've tried the magic wand and then going to mask and invert. the problem with this is that i can still see quite a bit of white around the logo. An easier way or do i need to go in and clean up the edges in photo paint's cut out lab? i can do this but it just seems like a lot of work and i have to work with about 15 logos.
View 2 Replies View RelatedSsince my last update in X6 all my whites are exporting as yellow and appear yellow in the thumbnails!
I can't even roll back to X3 as that has stopped giving me export options in the pop up dialog box!!!
I use to use Coreldraw X3 when I open the files in X5 the colors have turned to green(on vista) just got Windows 7 (64-bit)and when I open files from X3 and X5 the colors have all turned to white now.
View 3 Replies View RelatedI need to find a way to cut the shape of one object out of another object. In the above photo I need to be able to print the black crosses without the printer printing the white ink under them (you can see where the black ink is not adhering to the white ink very well).
View 11 Replies View RelatedI would like to scan some original pen and ink drawings I do and I'd like to remove the background once they are on the page so I can manipulate the art. I work in Corelx4. Will this same technique work with book pages scanned in?
View 1 Replies View Related