Photoshop :: Windows Print Comparision
Nov 29, 2008
I have been working on this for a while and cannot get what I want as printer output. I have a Pantone Eye-One Match3 terminal calibrator and I am set to luminosity of 120, Gamma of 32 and WP of 6500. My monitor is a Dell 2408WFP,24 inch. My printer is a HP Photosmart 8750. When I bring up a photo in Photoshop is looks great. I take my shots in raw, but my workspace is set up for RGB. If I open the same photo up in Nikon Capture 4, it looks the same as Photoshop. The problem is Windows and printing. If I look at the picture in Windows picture and fax viewer, it is too saturated. I get the same result when printing on the HP printer, even though I manage the print with Photoshop and use an HP printer profile for the paper that I am using.
Any thoughts as to why the mismatch between Windows/printer and Photoshop/Nikon Capture?
View 8 Replies
ADVERTISEMENT
Oct 14, 2011
I am having trouble printing to an HP Designjet T770 from AutoCad LT 2012, on a Windows 7 computer.
I am using the HPGL/2 driver. I can print a test page, and I can print from other programs.
When I try to print, it looks like it is sending it normally, but the printer just ignores it.
I am able to print to this printer from AutoCad 2010 on a Vista computer.
View 8 Replies
View Related
Feb 3, 2012
I'm having an issue with Autocad LT 2010 where when I xref in my title block which has our company logo in color, the logo will only print in black and white. If i open just the title block and print it, it will then print in color. I only seem to have this problem when the title block is xref'd in. I downloaded the 2012 demo version of AutoCadLT and it prints just fine?This has just started happening when my computer was upgraded to Windows 7 64 bit.
View 8 Replies
View Related
Feb 17, 2012
I am running 64-bit Photoshop CS5 Extended upgraded to current version (12.0.4).
When I try to print, every single time, I get the following error immediately:
> Adobe Photoshop CS5 has stopped working
Windows is checking for a solution to the problem
and then shortly after
> Adobe Photoshop CS5 has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution is available.
Quite infuriating. My printer works fine. I can print photos to it from Lightroom no problem (which, in this occasion, I had to do - saved from PS, imported to LR, then printed... very efficient!!).
I note there are other posts on this but they seem to be mostly Mac and also many seem to cure by upgrading to 12.0.4.
I am a relatively light user (keen amateur not professional) so I don't use PS regularly. However this also means it is pretty much an out-of-the-box install since I don't tinker with it either. It's so long since I last used it I can't remember if I had this problem last time - I vaguely recall having had it sometimes but not others. Doesn't seem to matter whether the file I opened is a JPG or a PSD (the only two I have tried).
View 23 Replies
View Related
Mar 12, 2013
Everytime I try to print from Photoshop CS6 using Windows 8 Photoshop crashes. I click the print option from the File Menu and bam it crashes and shutdown. No error message no nothing. I have installed the latest updates and still no go.
View 4 Replies
View Related
Mar 8, 2008
How do you take print screens of windows open on your computer?
View 2 Replies
View Related
Nov 11, 2012
When I print directly from Elements 10, my photos come out much darker than when I print directly from my computer on Windows 7? Is there a MAIN adjustment (not each photo) in the program which lightens all print-outs? My printer is fine. It copies photos properly and prints out from Windows (My Pictures) properly.
View 4 Replies
View Related
Jan 3, 2012
It's a Q6700, 4GB, 2TB drives, Epson R2880 running Windows 7, 64-bit. CS4 is very peppy, runs great, opens, closes, edits, NO PROBLEM.
UNTIL you decide to print. Once you hit the print selection it takes a MINIMUM of 40 seconds for the CS4 print dialog to appear. If you then hit the "page setup" button, it'll be at LEAST another 30 seconds before that appears. Once they're up, you can navigate around and make changes, but once you hit the print button on the dialog it'll be another 10-15 seconds before it responds and if you specify "Print Preview" it'll be at least another 30 seconds before you get the preview. Once it hits the printer, it prints fine. There haven't been any software or hardware changes in weeks, except the weekly MS updates that get installed.
I've tried large images, and small images in case there was something CS4 was doing. This process is this slow when printing a 4x6 greeting card or a 12 x 18 photograph.
What's interesting is this is a new phenomenon... It worked FINE up until sometime last week. Then suddenly, slow....... Concurrently, the print dialog STOPPED DISPLAYING INK LEVELS. The status monitor still displays them, but the printer dialog no longer does.
I've unloaded the printer and cleaned off every file I could find that appeared to be associated with an Epson print driver. Went to Epson and got the latest, Windows 7, 64-bit set of drivers and status monitor and installed that. No difference. Also tried a new USB cable AND switched it to the other USB port on the printer and on the PC. Nothing's made any difference......
If necessary, I can have her re-install CS4, but is there anything that should be done before we start clobbering major applications, or ever worse, the operating system?
View 24 Replies
View Related
Mar 11, 2013
The placement dialogue for printing which used to be in inches is now in mm and there seems to be no way of changing it back to inches.
View 2 Replies
View Related
Apr 22, 2013
Two of our computers have windows 7 and we are unable to publish or if we plot we have to wait until that page is completed before sending another page otherwise only some the information shows up when printed (ie. no dimensions or no title block). This does not happen on the other computer in the office which still has windows XP.
View 2 Replies
View Related
Mar 6, 2014
Unable to print document on windows CS6.6..Not enough memory was available or an object was too complex. Reducing the size of this document window may work. Document was created on mac book pro CS 16.2.1.
View 3 Replies
View Related
Dec 4, 2012
i used the page setup and creat new setup to print some area ..
ist possible to make a setup to print multi area .. - when i creat new one it ask to select what i want to print , but it just ask once ,if i want to print other thing i need to creat new setup ...
what i need is to selcect multi time .
View 1 Replies
View Related
Nov 3, 2011
I tried to print the layout from autocad, the autocad will freeze and it will prompt out the AutoCAD Application error message as the attachment below. Once click on "cancel", the application will shut down itself.
*The printer is HP LaserJet P5225.
*Other program like Revit, MS Word and etc still able to print well.
*Computer spec: Windows 7-64bit, 12 GB RAM, Xeon processor.
*Installed with the HP original driver from original disc that given
View 9 Replies
View Related
Aug 27, 2013
Using CS5 windows won't print all the graphics of the file, even to a PS printer. Some of the graphics don't print at all and some print in a reverse color.
View 5 Replies
View Related
Jan 19, 2013
Upgraded OS from W7 (64bit) to W8.
Using Canon Pro 9000 Mk2 printer, unable to select and print borderless prints of any size.
However, using Elements 11, there is no problem which suggest the problem is confined to LR4.3.
Have uninstalled and reinstalled the driver w/o success.
View 4 Replies
View Related
Nov 6, 2013
Looks like the format is not forwarded correctly to the printer when printing A3, it comes out as A4. If we change paper format in printer properties to A3 it works fine.
View 3 Replies
View Related
Feb 2, 2012
To print all open windows in Illustrator CS5 (or illustrator files in a folder) then close the files.
View 12 Replies
View Related
Feb 21, 2012
I've just installed an HP5000N printer on a Windows 7 Network. I'm printing from CORELDRAW X3. (Same problem exists when using X5) I'm using the HP UNIVERSAL print driver. (I have both PCL & Postscript versions installed.)
I'm trying to use the ADVANCED Settings - which require POSTSCRIPT - with no success from either driver. I can SEE the dialog for changing LINE SCREEN, it allows me to change line screen (i.e. 35 lpi) and Screen angle (i.e. 45 degrees) - but when I PRINT - it give me the default printer screen of 100+ lpi.
I have also run the windows wizard and let WINDOWS search for a driver. It selected the HP5000 PCL 6 driver. This driver does NOT support the TABLOID (11x17) nor does it solve the no postscript functionality.
Getting an HP5000N to print different line screens from X3, or X5 running on W7 platform?
View 9 Replies
View Related
Nov 28, 2012
Coworker is setting up a new Win7 (64bit) machine but we don't have the ability to upgrade CAD at this time. So running AutoCAD Mechanical 2007. (Yes we know they don't always play nice) Two other workstations here are running the same OS & CAD and print without issues. This new machine AutoCAD does not see any system printers. Have made sure the "Hide System Printers" is not checked under options. I can add a plotter file for each system printer and that workaround is OK, but why this one machine can't see the system printers. They are Xerox workstations on the network - not local. We have already restarted AutoCAD and restarted the PC.
View 3 Replies
View Related
Nov 28, 2012
I am facing this problem that when i give plot command and preview the window it show fonts different other than my main window. Also it prints as per the preview window and not as per the fonts present in my AutoCAD model space and layout.
View 1 Replies
View Related
Nov 25, 2012
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies
View Related
Jan 16, 2009
So I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
View 4 Replies
View Related
Jun 27, 2013
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).
View 13 Replies
View Related
Dec 5, 2012
-PC based system running Windows Home Premium 64 bit8 GB ramLots of hdd spaceCS5.5 Master Suite
-Epson Sylus Photo R1900
Operating system, CS5 suite and printer drivers all updated.
When attempting to print a photo, it can take anywhere from 5 to 15 minutes for the print dialog box to open up. It takes SO LONG that it appears that Photoshop has frozen, but it has not. The print dialog box opens eventually. This started about 2 months ago. I have looked at all preferences, assigned more RAM to Photoshop, uninstalled and reinstalled the entire suite, ran all updates, uninstalled and reinstalled the printer drivers - all to no avail.
I am at a loss as to why it would take SO LONG for the print dialog box to open after selecting print? I thought there may be a problem with the print spooler or print queue, but the slowness happens BEFORE the print back system is touched. The print queue is empty, and there is nothing stuck in there. I've checked.
View 6 Replies
View Related
Feb 14, 2008
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
View 3 Replies
View Related
Jan 8, 2013
I have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies
View Related
Feb 26, 2013
I have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
View 1 Replies
View Related
Dec 2, 2013
Why can't Windows Explorer show thumbnail previews of DNG's on my Windows 8.1 64bit Pc. I assume is has something to do with not having the DNG codec. However, on Adobe's website it says their DNG codec only works on Windows 7.
View 4 Replies
View Related
Apr 17, 2013
Using a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11?
View 5 Replies
View Related
Jan 10, 2012
This just started happening after I downloaded DWG TruViewer. I am working on LT 2008 using Fusionware on a MacPro. I needed the viewer to convert newer drawings from an architect. Now, when I double click on a drawing in Explorer a separate AutoCad window opens for each drawing I need open. I prefer to just go up to Window>and click on the one I need at that time, especially if I have several to switch between because it is easier to see the file name I want.
SDI is set to 0
Taskbar is set to 0
Relaunched the program
I can't open files using File>Open because the program crashed each time and Autodesk is not issuing anymore fixes for 2008. (Yes, we should upgrade but there is no money budgeted)
Right-click on any .dwg file and go to Properties>General>Change> and select the AutoCad LT launcher as the preferred program
Since I am in Window 7 instead of XP the File Types tab has been removed from Folder Options so I can't fix it that way.
So, why did this change? FYI that stupid TruViewer made lots of unnecessay changes to my AutoCad and Explorer programs that I am still trying to sort out like changing the file icon and hiding the file extensions. Are they trying to make it hard to find files or what?
And next, how can I reset the default so that double clicking on a .dwg in Explorer opens in already open AutoCad window?
View 5 Replies
View Related
Sep 8, 2011
We can preview the DWF files in Windows Explorer with Windows XP but cannot seem to be able to with Windows 7 64.
View 7 Replies
View Related
