Photoshop :: Why CS5.1 Converting Image
May 6, 2012
I am trying to create a card, using a standard layout size of 4.25 x 8.25. I have the resolution set to 300 PPI.
While adding layers, I am also adding in some images to the card for a newborn. The image res is 300 DPI, but once I open the image in PS, then pull it down into the new project, it auto commits to a 72 DPI. I can't for the life of me figure out why it is doing this.
I have tried going into the image>image size and changing it to 300 DPI, but even after I change it, when I go to the file information page, it tells me that the image is still set to 72 DPI.
View 4 Replies
ADVERTISEMENT
Nov 8, 2013
All the JPEG images I have converted from cr2 are grainy. I am converting them by Image Processor.
View 1 Replies
View Related
Feb 3, 2006
I've made up a logo in PS. is there anyway i can covert it to a vector shape?
View 3 Replies
View Related
Mar 15, 2013
I have a logo that I created for test purposes at a lower resolution. Is it possible to take the active selection of the logo and create a vector from it without having to manually trace over it with the pen tool or adobe illustrator (I do not own illustrator). If I could do this within Photoshop that would be my preference.
View 3 Replies
View Related
Apr 10, 2008
If you are using the new BW adjustment filter, can you control how much of the cyan goes in one part of the image, and how much goes in another part of the image?
View 7 Replies
View Related
May 24, 2013
I have always used PS to edit my raw images. I am now using elements. I noticed that when I converted all my DNG files to JPS it saved them at 240 dpi is there anyway to change them?
View 1 Replies
View Related
Apr 15, 2013
I am using an image for a contact icon on a business card, but the print quality of the image is bad.
Now will it work if I convert the image to a smart object and print the image like that? (The original image is a much larger png file that i convert to a smart object then resize it to icon size)
View 3 Replies
View Related
Aug 11, 2012
How to convert 100 jpg images into single png using Photoshop in single action?
View 4 Replies
View Related
Apr 26, 2012
I removed my nVidia Display drivers in safe mode and reinstalled, the problem persist. I reset my PS settings... same problem.It works only in Photoshop 32bits.
View 4 Replies
View Related
Mar 18, 2006
converting an image to a specific sized circle shape. Either by changing the actual shape of pasting a section of the image into a circle.
View 3 Replies
View Related
Feb 23, 2012
I have a very large piece of artwork in my possession. The artwork was originally drawn in high-resolution on a computer, but a true digital copy of the original is not available to the public.
My copy of the artwork is large enough such that the original pixels can just barely be distinguished by the naked eye. I would like to scan it in at extremely high resolution, or take photos of it (multiple photos of various sections may be necessary for enough resolution). Afterwards, I am wondering if Photoshop, some available filter, or other image-processing program would be able to analyze this ultra-resolution scan and reconstruct a perfect copy of the original digital image?
The idea is that if I can see the original pixels with my eye, Photoshop should be able to likewise deduce all the original pixels of the original digital image, and reconstruct it as such via some algorithm, in the original resolution.
View 6 Replies
View Related
Mar 23, 2007
I am trying to convert an object's color from black to white. Like changing the color of a killer whale's black coat to sumthin like green or blue.
View 1 Replies
View Related
Mar 19, 2014
I'm having trouble getting an image successfully into my vinyl cutting program. I open a black and white image into illustrator, I trace it, I paint a few more black lines that I need and then save it into svg or pdf. Once I import the image into my software it show all the brush strokes that I painted making it impossible to cut. Is there a way to make the image in illustrator all one image once painting it and making it decal cuttable?
View 1 Replies
View Related
Feb 18, 2014
new to illustrator and im trying to convert a digitally generated pdf. into a vector format/file without the pixel data. I have drawn up a logo/font (in autocad as thats what i know) and made a pdf from it to send to a printing company that only deals in vector format. i can import the image and get a trace of it but the frames add radii to corners and im having trouble isolating the vector/trace result to make a seperate file from (to send off)
so, its there an easier way to get a vector file from my pdf image
View 2 Replies
View Related
Nov 11, 2009
I'm doing an internship at school and need to convert alot of .tiff files and .dpf files into drawings. I also experimented with a program that converted the files from raster format into vector format. This is what I've found so far...
Able2Extract – Works very well when it does. Creates everything on 1 layer. Has options to use Autocad 2000 color palette or Autocad 2004 color palette. 2004 palette usual fails. Program works 50% of the time.
Aide PDF to DXF – Worked very well, once. Tried multiple floor plans and it came out chicken scratch.
AutoDWG VectorNow - Terrrrribllleeeeeee.
AlgoLab Raster 2 Vector – Miserable failure.
Any decent programs to convert these files?
View 3 Replies
View Related
Nov 7, 2012
I was told by a printer to convert my paint.net image, I send a jpg to them, to an Adobe RGB1998.
View 4 Replies
View Related
Jan 24, 2013
I have a color .jpg image that I want to convert to grayscale and then add annotation. Is this easy to do in Illustrator?
View 9 Replies
View Related
Jan 14, 2013
I've created a logo, and I'd like to use it in some PDF documents. I've tried several different methods for converting it into an image, but the image quality really degrades when I do. Maybe I'm expecting too much - since the vector image is essentially perfect - but it seems like there should be a way to come up with a decent looking image. Is there a "best practice" for this process?
View 4 Replies
View Related
Apr 14, 2013
I'm, trying to make an animated gif from a png image. I managed to do it, but there's a small problem... when I convert the png to gif (to make the animated gif afterwards) the image gets a strange white border around the edges. I tried to play with the Dithering and Tansparency threshold, but to no avail.
[URL]
How can I avoid this with Paint.NET?
View 9 Replies
View Related
Jun 1, 2011
I have a logo that I need to cut. I have tried scanning a hard copy and I have also tried using an attachment to convert to Corel Draw3 with no success. What are the steps necessary to convert from a scanned copy or from an attachment to Corel Draw3?
View 11 Replies
View Related
Aug 6, 2013
I'm trying to print colour to my epsom inkjet but for some reason Illustrator keeps converting my colour image to greyscale.
Now I've been using Illustrator for years and this is a new problem I've not come across before. Is there something I can do to stop it doing it - maybe there's a setting that has accidentally switched on that converts all to greyscale.
If not then I suppose I'll have to revert to "turning it on and off again"!
View 3 Replies
View Related
Feb 25, 2004
I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies
View Related
Oct 23, 2012
Whenever I want an image that I have edited in Photoshop to look good in a browser, I have to convert the image to my monitor's profile for it to look the way it did in Photoshop. So, the workflow is 1) finish editing 2) convert to profile for my monitor's profile 3) Save for web...
Color mgmt makes my head swim but I sort of see why this is. But my question is, most places on the web, I see people are just converting to SRGB for the web and I will say that that does not work for me at all. Does that mean they are talking about converting the color space and not the profile?
I admit that my monitor in its uncorrected stated is way off. That is to say, after I run the Spyder software my monitor colors look a LOT different. I shouldn't think this would matter but I'm just throwing it out there. I am a Windows user.
The reason I am asking this is because when I try converting images on export in LIGHTROOM to my monitor profile it does no good. The image looks terrible in the browser.
Am I missing something? Do I have a setting set wrong somewhere or does everybody have to convert to the monitor profile to get stuff to look right in a browser.
View 5 Replies
View Related
Mar 5, 2012
I have a milti picture file on photoshop that is too big to copy to a single cd. Is there a way that I can convert this to a pdf slideshow that will fit?
View 12 Replies
View Related
Mar 23, 2011
Where you convert to B & W on Version CS2. I had elements 8 for a while until I went into the big leagues and there was a nice area there where I had several 'programmed' options for different variations of B & W for the same photo to choose from. Where is that on CS2?
View 8 Replies
View Related
Feb 9, 2006
i drew and sliced a layout in ps then put save to web or whatever and set to png then loaded in dreamweaver but whenevr i view it in dreamweaver it is too small like white on the isdes and whenever i size it to be right for half screen ufllscreen doesnt work and vice versa.
View 9 Replies
View Related
May 6, 2013
so many tools and option here, and yet I can't seem to figure out how to convert old PCD files! Do I really have to buy something like Graphic covnerter to open these, and then move them into PS?
View 2 Replies
View Related
Sep 6, 2013
The web gallery function in CS5 seems to be completely different in CC.
Original system was Windows XP 32 bit with CS5 PS, that crashed and setup a new system with Windows 7 Pro 64 bit and Adobe CC.
The AOM was installed (Adobe Output Module), which apparently is the new web gallery function.
My question is, can the previous data from the CS5 Web Gallery be migrated to the AOM in CC ?
View 2 Replies
View Related
Aug 14, 2012
So... I am a bit of an amateur and have been shooting all of pictures in jpeg format. I use Lightroom 4 and Photoshop Cs6 for editing them. I am finally making the switch to raw format. I would like all of my pictures to be in raw or dng to work better with lightroom, so here is my question. Is it possible to convert jpeg fies to raw or dng? Would it be a stupid idea to batch convert all of my jpegs into raw format? Is it even possible?
View 5 Replies
View Related
Feb 27, 2013
I just downloaded a St. Patrick's day background from i Stock Photo. Nice vibrant green. We all know when converting to CMYK from RGB, there is a color shift but this is pretty dang dramatic. Any basic tips on getting some of that vibrant color back after converting?
View 4 Replies
View Related
Nov 22, 2011
I am trying to create a header for my e newsletter in Photoshop. I want to put the logo on top of a background of the same color as my logo. I have the CMYK ref for the logo, and this looks fine when I print it out. However, when viewed online or just on the computer - the background red is slightly brighter than in print.
I have tried using an RGB converter to change CMYK to RGB but this hasn't done anything.
View 5 Replies
View Related
