I want to make a whole webpage as a picture that is about 750 pixels wide. I see those pages have tables and pieces of the picture inside each. How do I cut up the picture to put in each table (cut to the exact size and evenly)?
View 9 Replies
I made a web site with PShop and GOLive back in 2002-2005, I do not have PShop or GOLive anymore, but i wish to edit the path address of those HTML pages generated by PShop and GOLive in 2002-2005, all i have is PS Elements10 and it does not recognize them, and none of my other programs will open the HTML pages so that I can edit them .
View 1 Replies View RelatedI recently started a tumblr Blog account. Still having some problems configuring it. I created a new page in tumblr and would like to embedd a picture gallery out of Lightroom. There are some nice html presets in Lightroom, but I cant get them into tumblr. I now installed a tumblr plugin (Jeffrey Friedl), but it only let me upload a picture onto my main tumblr page. What I want is to export a HTML gallery preset not on the main page of tumbler but on the "sub" page I have created.
View 3 Replies View RelatedThis is a tricky one, but it may just be that I don't understand the syntax,
Situation:I have an Edge Animate composition that is acting as an interface and container into which other content is embedded using an iFrame. I have several functions in Stage > creationComplete, and for one of the embedded content pieces, I want to include a button that calls one of the Edge functions.
Challenge: I have read about referencing elements within Edge when it is the Edge file that is embedded on an HTML page, but I cannot figure out how to reference Edge in the reverse.
I have tried these options where headerselect(page) is my function:
AdobeEdge.getComposition("EDGE-531849691").getStage().headerSelect("co mmunity");
window.top.Edge.getComposition("EDGE-531849691").getStage().headerSele ct("community");
I want to link from an html page button to within a point (label) on the timeline. What code would I need to put on the button?
View 4 Replies View Relatedhow I can control another Edge animation and/or html element of a single page from a custom Edge animated button? For example, I created an animated tabbed buttons in Edge, then I want to animate a different Edge animate once I clicked on a button in the other Edge animation. I want to add multiple Edge animation in one page instead of one big Edge animation. This is partly because the design of the page is done is Muse with the parallax effect.
View 2 Replies View RelatedI followed the adobe tutorial to manually create an html page in order to have two edge animations on a page but it doesn't work well. The second animation starts but not the first one (I can see the first frame only).
View 1 Replies View Relatedhow can i print the same picture multible times on one page
View 1 Replies View RelatedI tried using printing picture packages in PSE 12.0 on a MacBook Pro 2.6 GHz Intel Core i7 with Mac OS X 10.9.1. After selecting the menu command file-->picture package ..., in the appearing dialogue I can only see American page formats in inches. How can I switch to German formats like DIN A4 in centimeters? I tried "Adjust page ..." (don't know the exact English menu command translation for "Seite einrichten ..."), there the German format "A4" is correctly selected.
View 11 Replies View RelatedI'm trying to print two 4x6" photos on each page of a picture package, but I can't get it to print out the captions. I've successfully done it before, but can't now. The "more options" menu doesn't provide for "printing choices" and "show captions" for picture package, and I'm not sure how else to do two pictures per page. Is there another way to get the captions to print out when printing two per page? The captions print when I print individual photos.
View 2 Replies View RelatedI edited a picture that involved a layer, it asked me to save it as a jpeg picture which I did. Now I cannot find the picture I edited or the original picture. It comes up as a white page. What did I do wrong and what can be done to revert it.
View 1 Replies View RelatedI am building a webpage for a photography. They want a black background. They want the pictures to have a "shadow" (not sure what you call it) that would essentially make the picture look like it is floating above the page.
I do not know how to do this. I am open to answers in Photoshop or (although I know this isnt the right Forum) in Dreamweaver.
I have found loads of tutorials showing how to do this with a normal single tone page but I am having trouble getting the curl to work well on the bottom right hand corner with the texture and also the torn edge. I have tried distorting it but it just goes all blurred.
View 3 Replies View Relatedi have one psd file of template, now i want to convert it to html so my question is, how to convert psd to html. is
View 4 Replies View Relatedwhat is the process that the veterans use to get their graphic PSD ideas into a working HTML/CSS page? Currently I have been making creating a web layout, then once completed I make some layers invisible, then I duplicate it to another file, then Save As a jpg, gif or png. This has been a lengthy process and doesn't always work that well depending on how the layers are broken up or merged;
View 4 Replies View Relatedive made a webtemplate using photoshop 7.0, how do i get it into html??
View 2 Replies View RelatedUsing Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: 123456-Model - Error(s) Did Not Plot
File: C:Drawings123456.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
How do you change a .psd file into HTML?
View 9 Replies View Relatedi have designed a website with buttons header images, product details etc, now i have the design ready.
it is in .psd format, so now what i want is to implement this design into a webpage, i want distribute different sections or portions of the design, now i dont find any such function in photoshop 7.0
what should i do ?
do i have to cut the different portions manually to create .gif files.
I am using CS4 when I slice an image and go to File > Save For Web & Devices and I save it, it doesn't save the HTML file just the image slices.
View 4 Replies View Relatedi made a site for my band and sliced it up and let it do all the html for me but the last 4 sites i made got messed up when i uploaded them exept for 1.
View 2 Replies View RelatedIm supposed to save my imageready/photoshop file as an HTML and save it to disk.
How do I go about doing this?
I tried copying and pasting the code thats under the project when I preview it in a web browser, but all that comes up when i preview that is a digram of my slices with red X's telling me the images didnt show up.
The code includes stuff like:
But where are these images? I know the red X's show up when the images are not present, like, they're not in the folders.
when I slice in imageready, it automatically creates that image, but where are they on my computer?
I used a template to start and have done some extensive modifying to it. My site consists of 4 pages with the corresponding tabs at the top of the page. The top 1/3rd is identical from page to page....the content on the bottom 2/3rds changes. I did all the editing in Photoshop and am now trying to convert it all to html. I have sliced the index page and saved it to html. When I go to slice the second page, the slice numbers dont match up from page to page. I am basically relabeling all my slices. Also can't I just make the bottom 2/3rds of my page change instead of having to reslice the identical top of every page. I have browsed around and I know its possible but I can't pull anything together do mainly to lack of terminology knowledge on my part....
View 8 Replies View RelatedI have an image all sliced and ready to go in Photoshop CS3 and would like to show the client but can't find where the heck to export the HTML since ImageReady is gone.
I normally use the tool to export my slices to generate a quick view of what the page will look like and then take create a new page with CSS styles instead of what PHotoshop generates, but like the tool for creating mockups. I have searched high and low and can't find it. Can someone kindly please point me in the right direction?
I quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
Several times a week I need to take a PDF (single-page doc), then convertto a page-sized PNG with quality good enough to read the text (and atransparent border), and then convert to a SWF. I have a PNG-to-SWFutility, but when I used it on the PNG saved after I opened my PDF andexported from GIMP, the end result was not good enough. A co-worker saidGIMP couldn't make a PNG (w/transparency) with enough quality. He said we'dhave to use some other software. Part of the issue was not being able toresize without losing quality before the PNG export. True or false?
View 3 Replies View RelatedAfter moving a page in my document the master page elements no longer display on screen or in print. If I move the page to a different location in the document the master displays but if it is in the specific position that it needs to be it will not display. The document has multiple Masters and others do work on the page but the one that I need will not. I've tried deleting the page and adding a new one and that does not fix the problem. I've checked and "Hide Master Items" is not checked. The page in question is in position 48 with F-Master applied. If I move it to position 49 it works, 50, it works, 51, or any other it works. If I apply a different master to the page, it works. If I delete the page, add a new page and apply F-Master it still does not work. The only page that this problem is happening on is page 48.
View 1 Replies View RelatedTrying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
If it's a bug, then I cannot believe it wasn't caught before the release. So here it is. I simply put artistic text down on page 1. Select the text and copy to clipboard. Add a new page and paste the text. On my computer, the text changes from artistic text (as copied to clipboard) to paragraph default text left justified across the center of the page. It doesn't matter how much text I select, it always pastes on the new page as paragraph text left justified and across the center of the page.
However, if I select artistic text and any other object, copy and paste to a new sheet, it works erectly. Apparently, I now have to select text and an object to insure that the paste feature works properly?
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies View Related
