I followed the adobe tutorial to manually create an html page in order to have two edge animations on a page but it doesn't work well. The second animation starts but not the first one (I can see the first frame only).
View 1 Replies
I created this website for a client and it can be viewed at Uscantravel.com. However being in the SEO phase of the site, the publish for Static HTML to make the website search friendly turns off the animated pop-ups and links that are layered within symbols with additional animations. It works fine when I save the .html file and upload that, but the published file for static alters the website animations when uploaded.
Can I somehow use the copy and paste the Div tags into the workable .html file to make search friendly, or am I missing something?
This is a tricky one, but it may just be that I don't understand the syntax,
Situation:I have an Edge Animate composition that is acting as an interface and container into which other content is embedded using an iFrame. I have several functions in Stage > creationComplete, and for one of the embedded content pieces, I want to include a button that calls one of the Edge functions.
Challenge: I have read about referencing elements within Edge when it is the Edge file that is embedded on an HTML page, but I cannot figure out how to reference Edge in the reverse.
I have tried these options where headerselect(page) is my function:
AdobeEdge.getComposition("EDGE-531849691").getStage().headerSelect("co mmunity");
window.top.Edge.getComposition("EDGE-531849691").getStage().headerSele ct("community");
I want to link from an html page button to within a point (label) on the timeline. What code would I need to put on the button?
View 4 Replies View Relatedhow I can control another Edge animation and/or html element of a single page from a custom Edge animated button? For example, I created an animated tabbed buttons in Edge, then I want to animate a different Edge animate once I clicked on a button in the other Edge animation. I want to add multiple Edge animation in one page instead of one big Edge animation. This is partly because the design of the page is done is Muse with the parallax effect.
View 2 Replies View RelatedI have an existing HTML page (created in Adobe Muse) and I am trying to draw some Adobe Edge objects on top of the page (e.g. a rectangle or an image). When I look in the layers panel, the Edge objects show as top in the list. However, visually when I look at the page, the elements show behind the pre-existing HTML page from Muse.
View 3 Replies View Relatedim just wondering if the adobe team is gonna integrate sound into edge animate, like you have don with flash? Since i dont know how to code, its a constant hastle for me to try embedding sound into my edge animations.
View 5 Replies View RelatedIs it possible to add edge animations on a tumblr post. Is it similar to how you would using wordpress?
View 4 Replies View RelatedI need a few animations on one page but want them to load when scrolled into view.
View 3 Replies View RelatedI designed animation with adobe edge animate using png images, and added it to my website in adobe muse. When previewing the website it works perfectly, but when i uploaded my website to my host, everything loads except the edge animation content, in all pc and ios browsers.. Then after few clicks and mouse roll over the animation place on the page, and after a few reload of the page.. It loads and works.
View 2 Replies View RelatedI've just updated my development iPad and xcode to ios7 and xcode 5.
The app i´m developing uses web views to display content – which includes images and edge animations –embedded in one HTML-file using iscroll.js to swipe through (one page could be an image, the next a Edge Animation,separated in <li>-elements).
The Edge-Animations won´t show up, its just a blank page. However the iOS-Simulator shows everything correctly but on the iPad the Animations just won´t show.
Microsoft says Adobe products are not up to date with modern browsers.
View 18 Replies View RelatedI am trying to get an animation where the user hovers over one of 13 stars on string. What I am after is when they hover over one it looks like its been knocked and starts to swing for a shot amount of time.This should happen to them all. I have this code but it doesnt want to play!
Mouse Leave:
$(this.lookupSelector("star-1")).playReverse();
Mouse Enter:
$(this.lookupSelector("star-1")).play(0);
When you add more and more stars it just stops working.
I am including an animation I built using Edge Animate into Dreamweaver. I can't use an .oam file because of some other JavaScript I'm using so basically I'm limited to an .html file with all my edge includes java, and other supporting files.
when I preview in browser within dreamweaver. However, when I upload the page to my domain, my animate HTML file won't work. Here is a link to the current site in progress. (The first green box top left is my link to my animation). URL....
I have an ordinary div I composed with HTML, that I'd like to import into an existing Edge Animate comp and have it treated like an ordinary div. The two closest things I saw were: a YouTube video of a whole page opening in EA, and divs animated within itThis other forum, which has more components imported than I need:URL...Isn't there some kind of pasting window somewhere?
View 3 Replies View RelatedI'm running into a problem with my symbols, they seem to be going out of sync in my animation. I'm using multiple instances of the same symbol. See below link for the .html file for example of what I mean. The wings go out of sync after awhile, even though they're the same symbol.
[URL]
I need to make two animtions function from one action. So it should look something like plsy.("transition1") then go and play .("transtion2"). All under the same action I want when I press one button from my wb page for it to play two animations the first to take a rectangle like element off screen and the second to bring a new fro the side on the screen all this with the press of one button.
View 23 Replies View RelatedI have embedded multiple edge animations into iBooks and DPS. Howeve I keep running into an issue where one or more animations will not start after i have started another then move on to a different page. When i reload the book or adobe viewer then the animation that would not start runs fine but then others won't run. Individually they all run fine but when embedded together they start stalling out. I'm using edge 1.0 and CS6 indesign and lateset iBooks author. I have a published iBook and I have to tell users to reload ibooks in order to get each animation to run. They are not complex animations.
View 10 Replies View RelatedI‘m trying to have a simple (slide and zoom) ken burns like full page EDGE animation in our DPS folio.
The animation works like charme in the browser preview on my mac and is running smoothly without any issues. Only when I place the OAM in Indesign and preview it on the iPad (3) the animation plays back chunky. Well not exactely chunky, but it always stops once in the middle. Sometimes just for a brief moment, sometimes like up to nerly a second. It also happens when I test the HTML in mSafari. Not as bad, but definitvely also noticably.
Since I‘m fairly new to EDGE I don‘t really have a clou where to start optimising. It‘s a real simple animation (just one image moving and slightly zooming with some easing in and out, and one text element fading in) and the resulting oam is just about 790k.
Indesign CC
Edge CC
PDF folio v27
Is there any way to uploading Edge Animation animations on Vimeo or Youtube? (using v. 1.5)
View 1 Replies View RelatedI created an animation for a landingpage on my website(built with wix.com).
My problem is, that wix.com has got no folder-organisation or upload-function and my Edge animation has *.html, *jscript and *.jpeg/*.png files.
In a Wix.com-forum, I've found a response, that said, that I should use external storage-websites for my files.I did so and put these files in my dropbox/public folder, copied the open links in the *.html file like this:
<!DOCTYPE html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=Edge"/>
<title>Ani1</title>
<!--Adobe Edge Runtime-->
<script type="text/javascript" charset="utf-8"
[code]....
But, when I copy the code into my wix-page-html-app (for not-wix-user: a small field to insert html-code),nothing happens...
[URL]
still I try to reopen the issue about an error of "Edge Animate could not find the associated html file" for me, this error remains even after opening and saving corresponding html file. in fact I don't remember any successful launch of .an file for all my projects working at win 7, 64 bit
I want to use an iframe construction into my edge animate document. Edge animate *.oam file's planned to be used into inDesign DPS-folio. There is an iframe like <iframe src="local.html"></iframe> in that.
View 2 Replies View RelatedI have a textfield nested in a symbol and am using an Adobe web font (droid-sans). When I change the text inside the textbox with something like the following:
sym.getSymbol("captionButton").$("textBox").html("Hide Captions");
the fontFace APPEARS to go to some other sans font and seems bold from that point forward. Do I need to reset all the css properties of the fontface every time I change html text in a textbox.
I made several projects using Edge Animate 1.0, all of them worked perfectly. But now I need to make some changes, and several of them are displaying an error saying that could not find the html file associated with the project, even though the file is right at the same folder. I opened the .an file in a text editor and checked that the HTMLFileName attribute is pointing to the correct file. I'm attaching a print screen of the error.
View 8 Replies View Relatedinsert HTLM content into an EGDE animated Div box? Specificaly an HTML table? I can get the html code in the box but it won't read/render it as html code. In flash you can tell the program that the contents of the box is html code and it will read it as such but I don't see any way to do that here. I've tried several ways and I can get the code to display in the box but it won't render the code instruction in the boxCan it be done ?
View 6 Replies View RelatedI am trying to upload the file to webs.com for my website by it keeps showing up blank. I've uploaded all the files needed but nothing is showing.
View 3 Replies View RelatedOk so Im trying to embed html code into a website. I created an animation on edge, but after i publish i cant use the final publish link to just link embed. Because my isp has inbound ports blocked.
Anyway my question - Is there a way to just take the code from all the files and paste it into the website ?
If so, how would I organize the code, so it worked correctly ?
I created an HTML FORM, then loaded it into Edge Animate.
Now, that I have it there, I created a Div, however, I cannot place the form fields on top of the DIV.
It goes behind the DIV, and does not give me the option of appending it to the FRONT.
I sent the DIV to the Back, however, the Form Fields still remained behind the DIV.
How to work with imported HTML Form Elements within Edge?
I think that I might have figured this one out.However, you loose some of the properties, doing it the way that am trying it right now.Will post back my findings later on.
how can i send the html animation by email for my freind(yandex,email)?
View 6 Replies View RelatedI have a series of animate files that I have created. When I try to open the files to make edits, this error message appears:
All of the files are in the same folder, and I have not changed any file names or coding outside of animate. I can open the .html file and edit that, but when I go to save or publish, I get this message:
