Suddenly when I use the clone, the plane turns green, and clone does not work. Never before. What??? What are all the grid colors and how are we supposed to know what they mean?
View 3 RepliesI am very news to photoshop and I am using CS4 and have experienced a problem today that I have not encountered before.l When cropping a picture just a small green box with the normal red outline exists in Navigator howeverf if I click on Histroy the original pictgure will show back up on photoshop.
for the first three weeks I did not have a probloem with this issue, I am trying to get a fell for photoshop and then upgrade to the newest edition.
I have used photoshop CS 5 since it was released and every other PShop since Photoshop 6. Suddenly the Clone Stamp stopped working and keeps telling me I need to alt/click to define. I have tried re-setting all the settings, redoing preference, and even uninstalling and reinstalling the programme. Same thing keeps coming up.
View 2 Replies View RelatedI am getting photos ready to be used in a Premeire Pro video. I was given these photo by someone who scanned them. There is a fine green line running through some of them. I have tried removing it with the clone and the healing tools but they don't work on it (they DO work on the rest of the photo). I cannot figure out how to get rid of this line. There are no layers to flatten. Any help would be appreciated. I have never seen this before.
View 2 Replies View RelatedI'm not sure what i changed but when im trying to sketch a line usually the little cursor turns from yellow to green when it snaps to an edge or a center. but its not snapping, how to get my line snap back.
View 8 Replies View RelatedI'm inserting a data link from excel into my CAD drawing and every time I try to select the table it brings in, the corner "grips" the green plus signs, are so huge they are bigger than my sheet and I can't see anything in the table. Any way to shrink them to a rational size?
View 2 Replies View RelatedUsing 2011 with a PDF underlay. When the drawing is plotted as a PDF and the new PDF is opened, parts of the PDF portion of thew drawing are green. Changing the transparency, contrast, fade etc. of the underlay hasn't worked. I don't want to save the PDF underlay as an earlier PDF version because I'm snapping to parts of the underlay.
View 7 Replies View RelatedUsing the Copy(multiple) command button with the following sequence (working correctly): Copy command, window objects to copy, right click to close selection, pick base point,
pick new location point(s),...right click to close the command.But sometimes it decides to do this: Using the same Copy(multiple) command button with the following sequence (not working correctly):
Copy command, window objects to copy, right click to close selection, pick base point..At this point the copy comand closes out. It has assumed a single copy, 0,0,0 base point
& tossed the copied objects out in model space accordingly. But as stated it only does this periodically.
Out of the blue, when I re-import Photoshopped files back into LR3, they fail to appear in Grid View. But they DO APPEAR in the 'Import' screen, grayed out, as normal. So why is LR suddenly not showing them in Grid View.Here's a screenshot of the import window that clearly shows the image that does NOT appear in Grid View. Notice that image# 2012_3_4-Edit.tif resides immediately next to it's original 2012_3_4.tif file. It obviously is part of the catalog, LR knows it's there but it does not appear in the Grid. I really need a solution to this because I've build my workflow around moving files around with LR and this is a major setback for me now.
View 14 Replies View Relatedhow can i add an anchor point in the curve in the Channel R / G and B?
in cs5 , with ctrl + click i was able to click on the image and add an anchor point in the curve channel RGB and with shift +ctrl + click i was able to click on the image and add an anchor poing in the channel Red , 1 in the channel Green and 1 in the channel blue.
i know cs6 doesn't have any more ctrl+mouse click , there is the targeted adjustment tool. i can do it with ctrl+m and call the curve but i can't do it with curve adjustament tool
is there a way to add a anchor point in each channel red , green and blue (like the prev Photoshop)?
When importing a multi-page pdf or ps file into a multi-page document, sometimes the inserted pages will all have their Document Grid layer visibility turned on, even when the existing pages in the document all have it turned off.
If I bring up the object manager, I can go through the affected pages and 'un-eye' them one page at a time. But it's a blooming nuisance, especially when importing dozens of pages at once.
in p/s cs, when i use the clone tool, i am stuck with the first clone point. if i move to another part of the image and try to set a new point/example, instead of setting that point as my new point, i get a disc of the same point i used for the first clone work.
View 1 Replies View RelatedIm thinking of getting a surface pro, I have been using a keyboard and mouse for years so use short cut keys a lot and will have to get used to using menus again. However I was wondering because a tablet has no alt key how could I select a clone point for the clone stamp?
View 1 Replies View Relatedit used to work fine. now, when i am using a light sample, and then move to a dark colored part of the image, and try to select a sample from there, i can't select a dark sample. when i try, i get the previous light sample. ??
View 9 Replies View Relatedhow to change clone tool brush in vanishing point filter.normally it comes as oval shape vertical, have just seen horizontal shape and very tall vertical shape have tried all presets to no avail?
View 1 Replies View Relatedi was using autocad 2013 without any trouble, i used break at point two times, after that i modified some layers and i think that nothing else, and the command break at point stopped working, when i press it it automatically uses the command break. what is going on?
View 8 Replies View RelatedIs it possible to set a clone source point which moves in the opposite direction of the cloning route?
View 4 Replies View RelatedI am trying to follow this tutorial on how to create anamorphic images and I don't know how to use vanishing point. How to create a flat grid like it says. Also, does the number of rows in a grid matter? Because in the picture it's like five rows across and when I create a grid it's at least twenty rows across. I have an art final due in a two days.
View 2 Replies View RelatedHow can I print an image with the grid on top of it?
View 8 Replies View RelatedI'm able to get Vanishing Point to work up until I place the text into the grid I've created. It then becomes too big for the grid so it looks as if the grid has cropped it.
it's supposed to say OCCUPY on the ground but instead it's getting cropped and you're only seeing part of it. The original type I placed into the grid was not that large. How can I make sure the text stays within the grid at it's original size?
How do you add the motion path of a tracking point to a clone stamp without the clone stamp assuming the same initial/continuous positions of the tracking point?
Is there a way to keep the clone stamp's initial position and then add the path onto it?I am using the clone stamp to remove unwanted duct tape that was used to keep lights on a wall.
In LR4, you clicked, held down, and dragged your cursor to select a custom target source point to sample from... Clearly with the big update to the Spot removal tool in LR5, this action has a different effect... So in order to mimic that old action, you have to hold down Command (Mac) while clicking and dragging to select from a custom source point.
This issue I'm having is that when doing this, the Clone/Heal option always defaults to clone. I would say that 90% of the time, I'd rather have it acting as a 'Heal' instead. Having to then go and click 'Heal' to update this fact on every single spot removal is highly time intensive to say the least, when you are editing thousands of images, in my case, at a time.
Am I missing something, or is it possible to change this Default to 'Heal' instead of clone? I like that LR4 would leave the Clone/Heal option wherever you last set it, and you had to manually change it in order to use it differently.
I've converted a 2D image into a smart object, dragged into a project then transformed it using the Distort command (similar to how you might distort a 2d image to make it sit inside a photo frame at an angle) . I need to then warp that image around over something that looks like a curved panel thats 2D but looks 3d. Its not a 3d object, but a rendered 2d image that just looks 3d.
I'm using the Transform > Warp tool as Puppet Warp isnt available after using Distort when using Smart objects.
Warp works fine to some extent but I could really do with more handles and smaler grid for more accurate warping rather than the default 3x3 grid & handles..
Possible to add more handles/ nodes/ control points (or whatever they'e called) and/ or increase grid points in the same way Puppet Warp does this so as I drag around I control a tigher & smaller space?
the autocad can create points on grid? I must stipulate the points to be sampled in the field / map, and would be a nice increase for the company. I'm sending a map, and I need a point every 2500 m square. I managed to do manually. I picked a line and divide segments of it with the command point. But I had to use the "copy" in each row of dots and copy down.
The attachment is a map with 32,81 ha ( 328100 m 2). That is, I need 4 points per hectare (10,000 square meters) in total 131 dots ( points )
In short, it is possible, in this map make a grid of points 2500m square from each other?
I have a grid of around 100 points which are spread reasonably evenly.
I need to turn them into a surface as to see the height change between the points more clearly.
Is it possible to have a profile view grid line at a Profile Vertical Geometry point?
Civil 3D 2011 & 2013
ArcGIS 10.1
I've got a one point perspective set up perfectly for my wall as on the picture below, to place the 3D wording onto it. Except that the perspective grid ONLY lets you use the left side, for some reason the right side is unavailable. On the active panel, the right side is light blue and says "no active grid". Tried everything, including dragging the left grid over to the right side - but when you place things on it then they are reflected in the wrong direction (text backwards).
View 11 Replies View RelatedHow can I snap the center of an arbitrary symmetrical object to the grid? For instance the center of a circle or rectangle. According to this discusssion it's not possible: [URL]
How can I define a reference point in an arbitrary object or in a group of objects and snap this to the grid?
I was using the perspective grid tool and all of a sudden the selector for my vanishing point dissappeared.
How do I get this back? I have the perspective selection tool selected too BTW.
This is what I have:
I'm missing this selector:
I set a snap for ease of use, e.g. if my intended output scale is 1:50 I will set my snap to 25, this makes drawing lines fast and simple.
When I used the break command in previous versions (I skipped 2011) the break would keep the snap on so I could break either side of a line with a perfect unit gap.
In 2012 when I select the first point it disregards the snap and just puts the break wherever I select on the line meaning the gap is not neat. Is there anyway to put this back the way it was?
Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. I have reset the tools restrted my computer.
View 1 Replies View Related