Photoshop :: Using Transform Tools For Entire Picture
Nov 10, 2012
In the attached photo, I've already done some transforming and cropping to the get the top of the photo to be relatively straight.
I'm pretty sure what I need to do now is find a way to get the lower left of the photo to be pushed down and to the left to both: stop the appearance of that side of the photo jutting out more and to straighten out the white sign that says SOHO NOW OPEN so that it's flush with the top. However, I've tried all the transform tools and none of them are making that happen for me.
View 4 Replies
ADVERTISEMENT
Mar 15, 2012
I used to use MediaStudio Pro to create picture in picture especially where the picture starts small and grows to cover the entire background video clip.
I looked for and found a video filter which I thought would allow me to do the same. However after viewing the 'help' for the filter and trying just about everything I could think of I cannot achieve what I want to do if start with a video clip and then have another video clip appear (very small) in one area of the background video and then slowly grow larger to eventually cover the background video clip.
I can make the picture in picture appear and grow larger but it covers the entire background video clip with black effectively covering it no matter what size my picture in picture is. I looked for a chroma key to cover the black out but could not find it.
View 7 Replies
View Related
Apr 19, 2012
All brushes have been reset and are set the same. We are running CS5.5 Master Edition on a brand new 27" iMac 3.4 ghz Intel Core i7 Quad core using a Radeon AMD HD6970M.
This is a sample of how the tool is not using the entire diameter. This could be either erasing or painting a color.
View 2 Replies
View Related
Aug 25, 2012
Left - Marquee Tool > Transform > Skew
Middle - Liquify filter with "use graphic processors" selected
Right - Liquify filter without (same result)
Image above is at 200% zoom
All Transform tools cause jaggy edge. I've only tried these tools and Liquify for the last month and a half.
Uninstalled, re-installed Windows, Photoshop, graphic card - Evga 560 ti - drivers (all versions). No prevail.
CS5 works flawlessly on this system. These tools also work fine on my laptop which use Radeon HD3470.
View 19 Replies
View Related
May 20, 2012
I'm trying to enlarge a sprite to recieve better colorization, and it makes the image lose opacity when I do so?
View 1 Replies
View Related
Dec 15, 2012
I recently started having this problem in Photoshop CS6 where using the transform or selection tools makes all the layers other than my background layer disappear so I can't see what I'm selection or transforming. This happens randomly out of nowhere. I can be using those tools all day with no problem, and then out of nowhere it starts making things invisible.
There doesn't seem to be any other programs running that would cause it (not that that should be an issue, my computer could easily run all my Adobe programs at once if I wanted it to), and the only thing that seems to fix it so far is restarting Photoshop. But that gets old really fast when I have to do it over and over again. I tried calling Adobe, but somehow they're always closed, even during their supposed hours of operation.
View 5 Replies
View Related
Feb 18, 2014
I have been working with creating the effect of indented text. I have created a new fill which I placed behind my original one.I then went to "Effec" Transform & Distort" " Transform". I was going to add a vertical move of 1px - BUT it doesn't move vertically? My fill is moving downwards 1px?!
I thought I was going crazy until I zoomed in and applied the same setting again....sure enough it is moving down for veritical and vertically for down.
View 3 Replies
View Related
Oct 24, 2012
On Photoshop Element 11, how do I download the entire picture file? I am able to down load ONLY one picture at a time, but not all pictures at the same file at once for editing.so I can proceed to buy the software?
View 2 Replies
View Related
Apr 27, 2011
I covered how to transform a image in a variety of ways using different tools and effects and dockers.I felt that I should share some of her talent with her permission.
View 14 Replies
View Related
Mar 11, 2012
Working with PS CS 5.5
Background:
I have succsssfully used the Transform=>Skew command to 'square' a photo of an art canvas. And have cropped the photo to the edge of the canvas.
Question:
What are the steps/strategy to selecting the black/dark background and converting to a transparent or lighter color.
View 2 Replies
View Related
Jun 25, 2001
We have 1 machine in the office that when using super hatch it will not "hatch" the entire area as one hatch, it breaks it into separate image based pieces. The rest of the office, it hatches as one entity so it can be changed easily. Even if we use the group command, it will not group them.
View 2 Replies
View Related
Dec 5, 2011
After I use the lasso tool I go to free transform and make my correction. But when I press ok and then deselect, it's leaving a black mark on the picture from the free transform tool. Why is this happening?
View 7 Replies
View Related
Jun 14, 2013
There are trees in the right of my picture that I want to spread across the entire background. I can't find anything that tells me how or if I can do it[/font]
View 5 Replies
View Related
Nov 17, 2012
how can I transform a picture, like a landscape, into a curtain? I mean, if I have my picture I want to "blend" it also with shadows, etc... like this effect: URL.... not red, but as on it there is my picture...
maybe it will be difficult, but how can i do it??
View 7 Replies
View Related
Sep 8, 2012
Is there anyway to transform a 4-color picture into a 2-color one at reasonably good quality?
The problem I met is at the galley.I could, or migh, only be able to get a 2-color printer at reasonably good price.
The original design is 4-color. But the actual detail is not very important.They are book covers, which only need to protect the book.
View 3 Replies
View Related
Sep 8, 2012
Is there anyway to transform a 4-color CorelDraw picture into a 2-color one at reasonably good quality?
The problem I met is at the galley.
I could, or might, only be able to get a 2-color printer at reasonably good price.
The original design is 4-color. But the actual detail is not very important.
They are book covers, which only need to protect the book.
The exported picture is shown below:
View 3 Replies
View Related
Aug 9, 2012
Ps CS6
OSX 10.6.8
Problem: Transform applied to Smart Object fails to transform an attached Smart Filters Mask.
I mean a Transform, including Free Transform, as found in the Edit menu. A simple move by the Move Tool is OK.
A workaround until this bug is squashed is to encapsulate the Smart Object + Smart Filters + Filter Mask inside another Smart Object and transform that.However, that will not be a satisfactory solution in some cases. If a filter has size parameter(s), e.g. Gaussian Blur radius, a scaling or warping/distorting transform applied after the filter will obviously differ from the filter applied after the transform.
In any case, the workaround is inconvenient to subsequent editing and experimenting with filters and masks.
View 3 Replies
View Related
Nov 25, 2012
i have cs5 suite. last week everything fine in photoshop. this week, only the tools that are showing are available to use. i can not access the tools when i click on the corner of individual tools. i am running version 10.6.8
View 1 Replies
View Related
Sep 10, 2012
I instal form SDK User Tools because I need in Inventor Drawing Tools (Revision cloud). I do this install like on website Autodesk show and I didn't get it on ribbon. I do also registry of this plugin but I also didn't get it.
I used Invenbtor 2013 with servce pack.
View 2 Replies
View Related
Jun 18, 2013
How or where I can get the Detail tools that was in the 2013 Tool Palette?
Batt insulation
drywall
Plywood
studs
pretty much everything you need to build a detail. Where are these tools?
View 4 Replies
View Related
Apr 15, 2012
There seems to be way too many tools in the tools panel for me. Many of them I will rarely, if ever use. Is there any way I can rearrange or remove some of them? It would unclutter the screen immensely.
View 8 Replies
View Related
Feb 1, 2012
I have an interactive board with tools (such as pen or eraser) which I want to integrate with the AI. The typical scenario woulld be as follows: the user lifts the pen from the tray, the pen event will me mapped into selecting Pencil Tool from AI toolbar after which the user can add freehand annotations to the AI document.
Is there an API which would allow me to map abailable hardware tools with relevant AI tools? Is there an example which would demonstrate such integration?
View 5 Replies
View Related
Mar 26, 2012
How to get the 'Shape to Block' command to work (under express tools).
It says select object, but no matter what object I select eg. circle, pline or line, it says invalid selection. I am running AutoCAD 2012. Are 'shape' objects somehow different from any other objects?
View 1 Replies
View Related
Aug 12, 2003
I am able to use the menuload command to load the express menu, but when I try to execute one of the express tools. AutoCAD say invalid command, there was something on the website that said to type express tools at the command prompt, but when I do that, too it says invalid command.
View 5 Replies
View Related
Jan 20, 2013
I'm using PSE10 on a Win7 (64bit) OS. When I delete a picture (from catalogue and harddrive) the PSE-Organizer tends to jump down several pictures (Haven't been able to determine a fixed number), so I have to go up again and browse through the same pics a couple of times.
View 2 Replies
View Related
Oct 7, 2012
when i go into the editor and pull up a picture and blue background appears behind the picture and circle enters the screen. how do i get out of this?
View 1 Replies
View Related
Nov 15, 2012
I am using Photoshop Elements 10. How do I convert a picture to B&W and then erase part of the picture for the color?
View 4 Replies
View Related
Jun 4, 2006
Any one tell me how to turn a regular colored picture to a picture that looks like it has been drawn with a pencil.
View 1 Replies
View Related
Oct 24, 2007
I have several partially transparent GIFs.
I'm trying to layer them all on top of each other.
When I copy one partially transparent GIF and paste it on to the second partially transparent GIF the transparent section turns white and is no longer transparent.
Therefore covering up the contents of the prior GIF.
In short, please have a look at the three attached pictures, I would like to have all three on top of each other showing all buttons.
View 4 Replies
View Related
Aug 28, 2012
I cant copy and past pic into another pic after deleting all around pic.
View 2 Replies
View Related
Jul 11, 2012
I installed express tools with ACADE abd ACAD, some of them don't work, example:
_.sysvdlg Unknown command "SYSVDLG". Press F1 for help.
other commands missing:
arctextx, txt2mtxt,mocoro,dimex,dimin,qlattach
View 4 Replies
View Related
