Photoshop :: Using Character Style For Colour Only?
Jun 11, 2013
In my web mockup PSD I have several kinds of titles that share a common colour but each has a different size or even font.
Is it possible to have them share a character style which defines only a colour (so that I can modify at once the colour of all of them) but does NOT define their size/font (because they don't share a common size or font) ?
I recently started working on coreldraw x5, but i am having trouble saving a print style and getting the default colour management settings, i dont know if i missed something or did something wrong, but i dont even have those options on my program
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
I am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
I have recorded an action to create a transparent image on a batch of photos. Next I ran the image processor using the File/Scripts/image processor. When running the action the error message occurs no matter how many ways I attempt to modify the action. Error: The object "Style "Shape Style"" is not currently available.
I then look in the action window to check and under the steps Make Fill Layer: Style: Shape, Style 1 appears but I can't delete it. This one error message makes it impossible for me to image process a batch of photos with a watermark on them.
I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
How do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
Adobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
I am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
I have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
I am trying to to use Colour to Alpha by picking a specific colour from an image. But I can't get the colour picker to work.
The image has an alpha channel.
I choose Colour to Alpha, then click on the From swatch. The Colour to Alpha Colour Picker window appears. I click on the eyedropper. But when I move the eyedropper over the image, the cursor changes to the previous tool that was used. For example, if I used the zoom tool, the eyedropper changes to zoom as the cursor leaves the Colour to Alpha Colour Picker window, and zoom becomes active.
I would like to be able to select a colour like you can in photoshop. The swatches are very limited. I would like to select it from the colour 'wheel', where you can move up and down the slider to select the value and then move over the circle to select your colour? Or where can I find a huge swatch of colours?
I am looking for a way to change the text style used by a table style with Visual LISP. So far I have been able to get the IAcadTableStyle object from the acad_tablestyle dictionary, but there is no property for text style. Is this even possible? Code and results are below.
I read that it's not possible to import a style (styxml file) into the style editor through the API, there is no dedicated command.
However I'm wondering if there's a a way to have the internal name corresponding to the button as we can do for the ribbon buttons (there's a sample code which does this).
So is it possible ot get the internal name of a button inside a dialog box (style editor here) or is it really hopeless to think I can import a style with a macro ?
I am trying to change the default label styles for AddSegmentLabel under general styles using .NET...
Dim X As Autodesk.Civil.Settings.SettingsCmdAddSegmentLabel = CD.Settings.GetSettings(Of Autodesk.Civil.Settings.SettingsCmdAddSegmentLabel)()
X.Styles.LineLabel.Value = strChildStyleName ... says name does not exist
or
X.Styles.LineLabelStyleId.Value = oidChildStyle ... "The type of objectId is wrong"
If I manually change it to a child style and then check the values, they are the same as what I'm trying to set them to. If you use a "parent" style then these both work. Am I doing something wrong or this another limitation?
Civil 3D 2013 - Windows 7 Pro 64 - Dell T3500 - Xeon 2.67 - 24gb - Quadro 600
I am working with a template, that doesn't allow me to change the dimension style. In the project the Use Style Library is set to Read/Write. I have created my dimension style, at this point just a copy of the ANSI standard with a text size difference. I went to my template and set that syle as my default, and saved it. Now the fact that it doesn't automatically update the drawing I had alreadycreated is a nuisance, however if I creat a new drawing, the style has reverted to a different standard, that is not even the ANSI default. If I right click a dimension and change the dimstyle to what I saved it does update, but if I try to change the style again it defaults to a random dimstyle, AND changes the style even if I hit cancel. So... the question is how to make the changes stick?
When I get to the character panel I cannot enter numeric values using the numeric keypad. I'm using CS6 (13.0.1.1) under Windows 7. How to report a bug.