Photoshop :: Surface Materials
Jul 30, 2009Where can you find images of oil painting canvas to use on images or a vareity of other types of surface materials?
View 1 Replies
ADVERTISEMENT
AutoCad 3D :: Rotating Materials On Solid Surface
Apr 14, 2013I'm having trouble trying to place a material onto a surface so that it aligns with the x-y coordinates. When I use drag and drop from the materials library and use ctrl to select one particular surface/face, the material drop s in fairly arbitrary.
I thought I could use materialmap to force it into a particular alignment and while I can use the commands to set the base point and alignment, the material does not update with the boxed alignment.
AutoCAD Civil 3D :: Compute Materials Top Surface Will Not Show Up?
Jul 11, 2012testing out using link to marked point and volumes i made a 1000' alignment, flat surface at 0, and put a generic lws 10' wide at 0% slope so i would know the real vol in my head to check. i omitted the lws link and then put a marked point at the center of the subassy and then put a linktomarked point and it put the link in ok as shown in the picture. the corridor made a top surface and if i make a vol surface all is correct.
but when i hit the comput materials > earthworks only the eg shows up.
the linktomarked point has top,datum codes by default.
AutoCAD Civil 3D :: How To Correct / Manipulate Surface To Show Proper Flat Surface
Dec 2, 2011I often have to do storm pond surfaces that (for the purposes of planning) are flat on the bottom. These surfaces are created from a combination of survey data and grading groups and the tin of these surfaces is perfectably acceptable. However, when contours are shown, the flat bottom is shown with contours jig-jagging all over the place.
The attached image shows a comparison of the same pond. The top was created with survey data and grading groups; the bottom was created using contour data only. The generated surface on the top shows the bottom contour going in different directions and has parts where the an expected contour is missing.
How to correct/manipulate the surface to show a proper flat surface?
AutoCAD Civil 3D :: Reduced Maximum Length For Surface Triangles Causes Surface Holes
Oct 22, 2012Has instances where you set your tolerance for the maximum triangle lenth to say 50m to reduce the amount of triangles along the edge that run at long distances. When I do this I end up with multiple surface holes and I'm not sure why as there are points in the area.
I thought well maybe it's because i should've reduced my max triangles first then added breaklines. Would this matter? I also thought I could add a line to the surface to fix the holes vs. deleting surface lines along the entire edge of a surface for many many miles.
AutoCAD Civil 3D :: Editing Existing Surface Using Edit Surface Command
Nov 14, 2012I am trying to add points into a surface. I have done this before without any problems, but now I am having issues.
When I ID points which makes up the surface it gives me the correct Z level e.g. 24.5m, however when I hover over the surface it shows me the surface name and a different z level e.g. 0.65m. What is the reason for this difference in z levels? I think this may be causing the issue I am having when I add new points.
I select the surface and use the 'edit surface command' in the ribbon, choosing add point.Â
When I add a point at the level I require(23.89m), it puts it in a lot higher than the surrounding area, so I tried to put the point in to the lower z levels (0.4m) it puts it in a lot lower!
AutoCAD Civil 3D :: Volume Bounded By Existing Surface And Design Surface
Dec 10, 2012My goal is coming up with the volume bounded by the design surface and the existing surface. I don't have the design surface modeled yet.
Do i need to create alignment offsets?. Alignment 1 profile view is also attached. Then Alignment2.
What about starting with alignment1 profile view? Since I have created a polyline as the design profile ?
how do I shrink labels? Where is it in the settings ; the Align folder had been check.
AutoCAD Civil 3D :: Add A Surface To Blank Drawing / Then Upload DEM Files To Surface
Oct 2, 2012I am issues with DEM files that I am downloading from the USGS website.I download 24k, elevation for the area I need. I then choose staged 1 second, add a surface to a blank drawing, then upload the DEM files to the surface.
The surface imports correcty, but when I try to import points taken by a surveyor on the same drawing, they plot incorrectly.The DEM surface and the points from the surveyor do not correspond. Also, the DEM surface is in meters, not feet. I have tried changing drawing settings, datum types, coordinate types, etc.
AutoCAD Inventor :: Curved Surface - How To Increase Volume Of Surface At Certain Points Only
Apr 10, 2013how I can add more volume to curved object surface? Say for example I have a plastic cup.You can think of this as cylinder object ,which was the shelled out using the shell tool and then had its base sealed.
Now at certain parts, I would like to increase the thickness and then blend it the rest of the surface(may be chamfer its edges) .
At certain parts on curved surface I would like to add an extra mm, I think if the surface was flat I would just sketch the shape, then extrude it by few mm and smooth the edges by doing a chamfer
But how can this be done on surface that is curved? Or multi curved for edges?
AutoCad 3D :: How To Put Planar Surface To Solid Object Which Surface Is Curved Like Cylinder
Sep 2, 2013I would like to know how can put planar surface to solid object which surface is curved like cylinder for example. When start draw from first point rectangle of planar surface follow x cordinate not that solid object. How to do that simply?
View 9 Replies View RelatedAutoCAD Civil 3D :: Change Reference Surface For Surface Elevation Label
Apr 4, 2012Is there any way to change the referenced surface on a Surface Elevation Label. I can see the surface in the properties but cannot change it.
C3D 2011
AutoCAD Inventor :: Ribs On Curved Surface / Trimming To Complex Surface
Feb 28, 2013I'm designing a press for a skateboard similar to:Â Rib Press
I have the board modeled: (see attached)
Now what i want to do is generate those ribs as seen in the picture.
I tried creating a block that intersected with the board and tried to split the rib at the surface, but to no avail. I think the issue has something to do with the curve of the board in two directions, but i can't seem to get it right.
if you are having trouble visualizing what i'm asking about, look at this. I want to be able to figure out the exact shape of those center ribs to print and eventually cut out of wood.
AutoCAD Civil 3D :: Import Surface Into Revit To Merge Surface And Buildings Together?
Jul 29, 2013I have a project involving 3 programs. I am creating a planned development in 3d to be 3d printed when finished. The project is a 5 acre tract containing 8 buildings. I have built the surface in C3D and each building in Revit. The buildings are not in the same Revit file. For my solid work, I will bring the files over into 3ds Max Design to section into smaller quadrants to build in the 3d printer.
The questions:
Would it be better to import the surface into Revit to merge surface and buildings together?
Would it be better to import the buildings into C3D to merge entities?
Would it be better to bring those entities into 3ds Max and then merge them into one? Will 3ds Max Design allow me to insert entities accurately in the environment?
AutoCAD Inventor :: Extend Button Flat Surface Diameter 12.5 Upto Shaped Surface
May 31, 2012It is not possible forme to add the fil because it is to large 1.8MB how can I poste then I like to know if it is possible to extend the button flat surface diameter ø12.5 up to the shaped surface. The result should be a total solid block whit a surface shaped hole.
File last up-date with Autodesk Inventor Professional 2013
AutoCAD Inventor :: Extrude Feature And Select Part Surface For New Sketch - Offset Surface?
Dec 9, 2011I am a beginner when a extrude a feature and select a part surface for new sketch now i want is to offset that surface but i can,t there is + sign with mouse icon and something like fully constrained is written in down the window.
View 9 Replies View RelatedPhotoshop :: Scaling 3D Materials
Dec 24, 2012I am working on some fairly basic 3D extrusions. I am applying materials to the different objects (eg. Marble), however, when the marble is placed it is too large. I want to scale the overall pattern/material down.
Â
How do I go about doing this?
Photoshop :: 3d Materials Editor?
Sep 25, 2008Regarding photoshop cs4 win extended.
I'm trying to find out some things about the 3d materials editor
The adobe site video called "3D object and property editing" was no help in answering the following.
Does it have a procedural texture generator?
If so, then does it have some procedural texture presets?
Can you modify and save procedural texture presets?
If there are no procedural textures.
Then what are the materials, vectors graphics? bitmap?
AutoCAD Inventor :: Merge Flat Surface To Circular Surface?
Dec 6, 2012I am trying to merge the gaps left from extruding a flat surface off a circular surface, delete face and heal does not appear to work.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Civil 3D :: Creating Subset Surface From Main Surface
Sep 15, 2013I need to create a sub-set surface from my main surface. not sure what the vernacular is for a "subset surface" in c3d but i do have a feature line that bouinds the desired area, but that is as far as i can solve.
i did try creating a new surface - pasted the main surface in the edit definition, then deleted triangles until the boundary alighned wiht my featureline.  This seemed to work, but  when i view the properties of the smaller subset suface, it shows a mimum and maximum elevation that is incorrect.
AutoCAD Civil 3D :: Create Cut Fill Surface From Existing Surface
Mar 1, 2013Im currently using an addon for Civil 3D called Novapoint. It allows me to create 3D models of surfaces made out of 3d faces and easily models cut and fill 3d-models for me.
The only thing i need to create a cut and fill model is one or several ground surfaces (existing ground, earth layers, rock etc. whatever i need) and a closed polyline/3Dpolyline that represents the level I want my cut and/or fill model.
I enter the spcifications I want such as; earth cut angle, rock cut angle, fill angle, select which surfaces i want to include in the model calculation and select the polyline.Novapoint then calculates the cut/fill model from the surfaces to the polyline and models the different cut/fill angles and gives me the results in a 3d-face model and a specification of the volyme of rock cut, earth cut an fill.
1. Novapoint is quite unstable and crashes alot
2. You cant create profiles out of 3d faces
3. Novapoint does not automaticly combine the start surfaces with the modeled cut/fill surface
4. A large surface made out of 3d-faces demands alot of computer powerÂ
So I want to how I do the same that Novapoint does for me in Civil 3D? (I have access to Civil 3D 2007-2013 depending on which one you're using)I know I can take the 3Dfaces i created in Novapoint and make a surface in Civil 3D with them but I want to exclude Novapoint completely.
AutoCAD Civil 3D :: Corridor Surface Will Not Paste Into Empty Surface
Mar 26, 2012all of a sudden whenever I run audit on my corridor file the surface definition becomes a snapshot. To add to the drama, the corridor surface will not paste into an empty surface. Why?
View 2 Replies View RelatedPhotoshop :: Adding Materials To 3D Objects
Oct 1, 2013I recently downloaded a car seat 3d model from turbosquid. It is a OBJ File (.obj). I am having a hard time adding a custom fabric material to the object in Photoshop CS5.5. The material is showing up as a plain blue color and is not adding in the actual pattern of the fabric.
View 4 Replies View RelatedPhotoshop :: CS6Â additional 3D Materials
Apr 12, 2013If I try and load new 3D materials using the "Load Materials" menu item Photoshop sends me to a web page which no longer allows logins due to the transition to Revel. Since Revel appears to be for user content I can't see why the 3D materials would be there.Where are the additional 3D textures for Photoshop ? I have searched Adobe.com but cant find a mention of them directly.
View 2 Replies View RelatedPhotoshop :: Increase Margins For Materials In CS4...
Aug 18, 2009I've been a user of DeepPaint3D with Texture weapons for many years. Now I got Photoshop CS4 extended, to be able to use Photoshop filters and do other things DP3D isn't capable of without having to im-/export my materials from / to DP3D. Which is when I ran into a problem. How do I increase the margins (you know, that 'pixel overlap' part that's beyond the UV mapped area on a material) in PS CS4 extended? Ten years old DeepPaint3D with Texture Weapons can do it, even 'for free' Blender can do it (when baking maps), so where do I find that option in Photoshop?It's pretty much unacceptable to have a material 'end' at precisely the border line of the UV mapped area; particularly if, at some point of time, said material would have to be resized to a smaller scale (which is usually when a few pixels get eaten away at those borders). I've really been searching up and down and googled a lot but could not find it (but then again, maybe it's not called 'margins' in Photoshop.
View 2 Replies View RelatedAutoCAD Civil 3D :: Can't Use The Corridor Surface As DATUM Surface
Feb 7, 2013My problem added with pic ... I want to make volume calculate for sample road project. When I try to compute materials I cant use Corridor surface for DATUM... There is only target surface on option..
View 2 Replies View RelatedAutoCAD Civil 3D :: Adding Corridor Surface To EG Surface
Mar 6, 2012I am trying to visualize a road project. The problems is, whenever the corridor surface goes below the EG surface (when the road is in cut) the EG surface is the only visible surface.
I sort of need to subtract the corridor surface from the EG surface, or merge the both surfaces into one.
AutoCad 3D :: Make Curved Surface A Flat Surface?
Oct 19, 2011If you look in the attached PDF, I have an elliptical wall that also has changes in elevation. call it a compound radius if you will. What I have to do is to make a wall cap to go on top of the wall. I know, sounds fun.....I have the surface on the right of the PDF and i need to figure out how i can take that shape and have it lay flat so that i can cut this shape out on my CNC. i know I can use the FLATSHOT command, but this will not give me the true shape of the board.
View 4 Replies View RelatedAutoCAD Civil 3D :: Trim Surface To Another Surface
May 3, 2013I was wondering if there is an easy way to trim one surface to another. Right now, I have two slopes (3:1) that are perpendicular to each other. They meet at a corner and I have extended them past each other so that I could see the intersecting edge. Now I would like to trim them to each other like you would a polyline etc... but I am not sure how to do this.
If I select surf trim, it tells me they are the wrong object type, but they are tin surfaces?
AutoCad 3D :: Turn Surface Into Planar Surface
Jul 8, 2008I know there is a procedure to turn a surface into a planar surface, but i don't really know if autocad can do that, or how to do it. By this procedure i mead transforming a cone into a surface, a cilinder into a surface for example, but in my case the main surface is not a basic surface (as show in the image) and the procedure is quite tricky.
View 9 Replies View Related3ds Max :: Cap Surface Of Extruded Closed Spline Surface
Dec 15, 2011The attached csv file contains x,y,z coordinates and the image number per row (only 1 in this file). I am reading in this file and creating a spline knot at each of these points. The last coordinate x,y,z set closes the splines and creates a shape that resembles a US state. I next extrude it a couple inches and it looks like a hollow 3-D state.
My question is how do I go about capping (or filling) the top and bottom faces? I have a feeling it is a bit more complicated because of the large number of knots, around 127, in this shape. As every time I try and follow the cap surface instructions in the reference it doesn't do what I want. Is there any way to automatically or by using a script join the vertices so that it looks like a mesh grid on the top and bottom and then fill in those areas?
[URL]
Photoshop :: Can't Load New Materials (ZXP File) From Adobe Site
Jun 21, 2013I'm on iMac, in photoshop cc. I go to 3D--Get More Content---I download the materials file from the adobe site and it's a .zxp file and I don't know how to load it to photoshop.
View 2 Replies View Related