I'm trying to straighten a crooked photo. The instructions in the Editor space say I should click the Straighten tool, draw a line on the photo, and the image will rotate to the angle of the line. I did exactly that and even though the line got drawn, the photo didn't move.
View 6 RepliesI have several photographs of amateur paintings that were taken with some kind cheap camera that distorts the edges, making them curved.
I want to straighten those edges and then crop the photo so it'll be just the painting.
I'm trying to find in Paint.NET the functions I use often:
1) How to straighten photos, using an horizontal line or a geometrical figure (I tried yet the radius straighten, but the photos are deformed then)
2) Some info on how to add a transparency layer and how to "colour" an area with transparent background;
3) How to make a gradient of two or more colours with advanced settings;
4) How to cut an area of a photo with precision (point-to point system and point to point "guided" based on colour tollerance levels; magic wand seems not to cut and then I haven't a firm hand);
5) Additional plugins for photo editing (borders, frames, artistic effects, etc.)
I took a picture using a 24mm WA lens up close.
The horizon is straight BUT the church is tilted due to the lens.
Can the church be straightened without messing with the rest of the image?
This is NOT a HDR processed image.
After using the straighten tool, I end up with the picture within its own borders the way I want, but it appears on top of another piece of white paper, and skewed on that white paper…how do I get just the straightened picture without it appeared on top of the “white paper”? I am using Photoshop elements 10 on an i Mac desktop.
View 1 Replies View Relatedi have photographed an old book of mine, and i am batch cropping and straightening the photos in photoshop, but the cropping fluctuates from, in some shots, editing out just the borders around the book, which is what i want, to editing out one whole page (of the two per photograph)- something i do not want. there does not seem to be any logic to what is edited out or not, it seems random. can anybody help with this inconsistency problem?
i want to edit out just the border (background) around the book, but leave both pages in the photograph. why at times is the program editing out whole single pages leaving only one page per photograph?
P.S. just to update, i have realised that perhaps the problem has to do with the fact that the two pages on the book have, like all books, a dark line vertically down the centre between both pages where the binding is. think of a photcopied page which has a dark line down the centre separating left from right page. i believe that photoshop reads that black centre-line as a border itself and so edits one page out; it assumes the black line is a border and edits out everything outside of it (which contains the other page).
now i'm not sure how to overcome this. is there a way i can set it so that the cropping feature works on some rough template to do with size? the page sizes are relatively similar, so if it used a size-type template to crop, it would work well. this problem is random and not all photographs are problematic, but quite a few seem to cut out one whole page.
I just downloaded the trial version of CS2. I have a lot of images on my computer that I scanned into my computer. Naturally, these images were not centered when I used my scanner.
I was just wondering if Photoshop has any features that would allow me to slightly rotate my image to make it completely straight?
I'm working my way through Adobe Photshop 7, ClassRoom in a book. I'm now on lesson three and I'm completely stuck. I have my image open (its not straight and needs cropping)and I have selected the cropping tool and entered the width and height dimensions.
The book then tells you to use the marquee tool to select the area that you want to keep, which I have done. But then things go sour for me. It says after you release the mouse button a cropping shield covers the cropping selection, and the tool bar option now displays choices about the cropping shield. This doesn't happen for me. I just get a broken outline around the area I want to crop.
Also, it says in the tools option bar make sure that the Perspective Check box is not selected. I can't find this on the toolbar.
And, finally,it says, In the image window move the pointer outside the crop marquee, so it appears as a curved double arrow. Then clockwise to rotate the marquee until it is parallel with the edges of the pictured window frame. Again, this doesn't happen for me, all that happens is the pointer changed to a cross.
Does anyone know of a way to automate adjusting the cropping frame
after straightening a picture using the Measure tool?
I have a friend who is verticality challenged. He seems incapable of
getting a shot straight. He just shot a big Christmas party and has
over a hundred shots to straighten. I have to straighten one
occasionally myself. It seems tedious and unnecessary to have to
adjust the cropping frame every time after straightening the picture.
I teach elementary photoediting using all versions PS and PSE.
Somewhere along the line I ran across a version of PSE that
automatically did this. It fit the cropping frame to the picture
content so, if you just wanted to remove the exposed canvas you could
click crop and you were done.
I just got elements 7. I tried to straighten a photo, but I do not know how to save the change.
View 1 Replies View RelatedI have a requirement to take a relatively simple technical line drawing (think circuit diagrams etc) that have been hand drawn and then somehow convert them into a nice sharp and neat diagram that looks like it had been done in illustrator or Visio.
I know that image editing tools such as Illustrator allow you to "vectorize" a bitmap image but the thing I don't about is whether any of the applications can automatically straighten and correct lines and give me a "nicer" picture as a result?
Does anyone know if this sort of thing is even possible?
Looking for the process to straighten the lines on an equirectangular panorama I have made with a series of images with a 15mm fisheye lens. I would like to create a true parallel with these files if possible.
View 3 Replies View RelatedI wear glasses and in most pictures I'm in, my glasses seem to be crooked and not aligned with my eyes correctly. I wanna know if it's possible to straighten them. I've tried selecting them within a new layer and using the Rotate/Zoom tool, but that doesn't work.
Also, if Paint.net isn't capable of doing this, is there another free image editing program that is?
I've converted a bitmap which contains a pixelated banner in to a vector image. Whilst the output is almost there, some of the edges of the "pixels" are not at right angles and therefore the "pixel" is not a regular rectangle. I have converted all the anchors to corners, however this made some of the "pixels" in to trapezium shapes instead of right angled rectangles. There are too many pixels to modify to do this manually. Is there a way to "Select All" -> "Make all corners 90 degrees" type functionality in Illustrator CS6?
View 3 Replies View RelatedI'm slowly getting familiar with the new pressure pipe tools. So far I like the layout compass but I'm finding the rest to be rather cumbersome to work with.
One problem I have is how to straighten portions of a pipe in profile after fitting it to a surface profile. Each pipe ends up segmented according to it's cut length property. Typically after fitting it to a surface profile we want to straighten the pipe between critical points along the profile. I don't see any way to do this aside from dragging each segment. Is there a way to remove, add or adjust the length of individual segments?
I don't see any other than the videos provided in the new features catalog.
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
Using LR 3, my finished JPG files, exported from RAW, still show a transparent grey area after image straightening/crop is applied. The problem only occurs once images are uploaded via FTP and viewed in Fotostation software.
View 1 Replies View RelatedThe "Done" button that appears at the bottom when using the Crop & Straightening tool and others has suddenly disappeared. I thought it was a full screen issue but cycling through F doesn't restore it.
View 2 Replies View RelatedI need to do a small bit of horizon straightening on an image which I have.
Using the rotation tool is fair enough.
Under clipping I select crop to result.
In the rotation dialog i enter the angle ( -.7 )
When I click rotate, it goes through the motions of a status bar advancing (green bar), but when it is finished doing its thing the image vanishes entirely, and i'm left with what looks like a transparent background.
If in clipping, I select 'Adjust', it rotates fine but I have to crop the result manually to have the image 'square' with no transparent angled edges.
How the rotation tool works? I'm using Gimp 2.6.4 on Windows Vista.
I have a photograph of a page of a book. The bottom and sides are straight, but the top is curved. What tool/plugin can I use to straighten the top edge and the text?
I'm sure there must be one, but there are so many different plugins and I have limited experience with Paint.Net that I am a bit lost!
When trying to place an image into a new document in photoshop elements 12, I select all-copy-paste the image (or even drag it) over to the new doc created. However, when I do this - the image does not paste in at the same size. It typically shrinks down in size. Do I have to save the file, close out and then open the new doc and PLACE it in the document in order for it to keep size? There must be a better way to do this. Basically, how can I drag a photo that is 4x6 over to a new doc while keeping the size at 4x6.
View 5 Replies View RelatedI want to enlarge an image on a digital photo and save the enlarged image as a seperate photo
View 5 Replies View RelatedI am trying to open a photo in camera raw and the image always has a lot of red and blue in the picture? What can I do to avoid this. When I first started learning photoshop this did not happen?
View 5 Replies View RelatedI would like to adjust old photo made on bromportrait photo paper. Is it possible remove texture of bromportrait photo paper? If yes, how it to do?
The image has such texture:
On Adobe Elements 11 can you rotate an insert to a photo without rotatine entire photo?
View 2 Replies View RelatedHow can I remove a white film on my photos after scanning the photos?
View 1 Replies View RelatedHow do I make a photo sepia and leave an item in the photo the original color?
View 1 Replies View RelatedWhy does my cropped photo look like a broken page inside a version set with the original photo?
View 1 Replies View Relatedin elements 11 how can I extract a person from one photo and insert that person into another photo? I'm totally new to this and my software booklet doesn't say and I'm lost.
View 2 Replies View Relatedhow do i add a person from 1 photo to a group of people in another photo (using elements 9)
View 1 Replies View RelatedI have two photos, shooted probably the same day, by the same photograph in the same place !But the pose is a bit different. first one is in high resolution and in black & white nuance. second one is a small resolution and in full colors.
I wish re-color the black&white photo using exactly the same nuance from the colored one.
can i "copy" all the colors from the color-one to the b&w one ?
i hope there is a quick way to do that with adobe photoshop or with a commercial plugin. Something like : i load the first one (color), i load the second one (b&n), and i press Ok and magic appears !
here are the photos :
the black and white to recolor
[URL]..........
the source color to use
[URL].........
Does photoshop let you cut and paste from one pic to the next, like for example... cut out the head of a person on one photo and paste it on another photo?
View 1 Replies View Related