Photoshop :: Selection Tools Are Inaccurate.

Aug 1, 2003

My selection and lasso tools all of a sudden arent makeing smooth straight diagnol lines and other lines, but making jagged lines... even my circular tool.

View 9 Replies


ADVERTISEMENT

Photoshop :: Selection Tools

Dec 5, 2003

when I make a selection with any of the tools, and modify border than delete; I get a feathered effect around selection. I have set feather to zero, and have also reset tools to defaults, but still cannot get a clean, sharp edge. This has happened before, and the only thing I could come up with to fix the problem was reinstall.

View 4 Replies View Related

Photoshop :: Selection Tools Color

Oct 7, 2013

Is there a way to change the defualt gray color of selection tools in PSSC6? When making selection of products on a gray sealess the lazzo  path is difficult to see.

View 2 Replies View Related

Photoshop :: No Tools Show Selection

May 27, 2009

Vista home premium 32bitPhotoshop CS4  Extended Problem I got is that no matter what tool I use, (marquee, wand, lassoo, ellipse) etc, I don't see the area/marching ants that is being selected untill I release the mouse button.eg,

open image in Psselect rectangle marquee toolplace mouse arrow on imageleft click once and holddrag pointer to required pointNothing different shown on screen No marching ant boxRelease left mouse buttonMarching ant box is now seen.

Same pc being used that has photoshop 7 on and that prog runs fine, or at least as it should do... Have checked prog settings and couldn't find anything obvious. Have also tried changing vista visual settings to no avail..

View 2 Replies View Related

Photoshop :: Selection Tools Have Stopped Working

Feb 3, 2013

I was trying to cut out a bridge stock today, and all of my selection tools are suddenly acting psychotic. Whether it's a lasso or a marquee tool, they all give me this result when I try to select something:

I haven't trying restarting Photoshop, but I just wanted to know how to fix this and how I can prevent it from happening again.

View 1 Replies View Related

Photoshop :: Selection Tools Make CS Crash?

Aug 22, 2012

When I am using either the magic wand tool or the polygonal lasso tool in Photoshop CS, the tools cause the program to behave strangely, including:

-crashing (program error, PS shuts down)
-PS completes a lasso by itself without me completing it
-using the lasso tool causes the tools pallete to go blank, and hovering over each tool restores it
 
Is there a fix for whatever is causing this bug?

View 1 Replies View Related

Photoshop :: Cannot Change And Use Selection Or Crop Tools?

Feb 24, 2013

I am using Photoshop Extended CS6.  A new problem has started to occur recently.  I can select a tool, but I can't change the tool type. For example,I can select the Lasso Tool and when I right-click the tool fly-out appears, but I cannot select a tool from the fly-out to change the tool type.  The editing tools, at least the ones I can select, still work except for the selection and crop tools.  For the crop tool, the crop lines appear at the edge of the image but they cannot be moved.  For the selection tools, nothing is selected.  I can still use menu commands such as Canvas Size.
 
This happens when I open a file or start a new file.  I have Windows 7, 4G memory and nothing else running.  I have tried 32-bt and 64-bit versions.This has happened intermittently for a month or two.  In the past, freeing up space on a hard drive seemed to work.  But now I have 50G free on one drive and 30G free on another so I don't see how that could be the problem.  Rebooting allows me to use the crop tool once, but then the problem reoccurs.

View 5 Replies View Related

Photoshop :: CS6 - Selection Tools - Getting Rectangles Of Marching Ants?

Nov 30, 2013

I am having trouble in CS6 with selecting a portion of my photo, with any of the tools- quick-selection, lasso or magnetic lasso.  

What happens is that once I have completed my selection, I get strange rectangles of 'marching ants' throughout my selection.  These show up as different colours on the layer mask as well.  When I first used quick selection it worked properly.

View 3 Replies View Related

Photoshop :: Selections That Make Using Quick Selection Tools Keep Disappearing?

Oct 20, 2013

How can i stop my selections from disappearing, so that i make effects in those areas?

View 1 Replies View Related

Photoshop :: Selection Tools And Brushes, Pens, Etc No Longer Work

Oct 26, 2008

downloaded upgrade versions CS3 on septate computers. She is taking a class in Photoshop using the Adobe Classroom in a Book as a text. About a month ago she started to have problems getting selection tools and brushes etc. to work. None of those types of tools work at all now.

She has downloaded the latest upgrades. We have completely removed Photoshop from the computer, and reinstalled it twice. The computer is scanned for viruses and bots. All other applications work fine. She is now having to use my computer to complete her class work.

View 4 Replies View Related

Photoshop Elements :: What Action Is Demanded When Using Marked Tools To Make A Selection

Jul 17, 2013

what action is demanded when using marked tools to make a selection and I receive a response ". No pixel selected"?

View 1 Replies View Related

Photoshop :: Severe Color Posterization / Patches And Non Functioning Selection / Fill Tools

Aug 14, 2012

I just got a new laptop (Apple Mac book pro with OSX 10.8 Mountain Lion) and a fresh installation of Adobe CS6 and Photoshop is practically unusable. The issues are that there is weird color banding across the full size image (it looks fine in the thumbnail preview in the ‘navigator’ tab). These bands move and change. Next, when I use the selection tool it selects weird shapes. And if I attempt to fill it, the fills are not the color, nor the transparency nor the shapes that I set. That means masks can’t be used and pretty much no editing is possible. Some blog posts describe a similar problem, and propose changing the ‘Performance’ preferences .

View 4 Replies View Related

Photoshop :: Using Transform Or Selection Tools Makes Non-background Layers Or Whole Document Invisible

Dec 15, 2012

I recently started having this problem in Photoshop CS6 where using the transform or selection tools makes all the layers other than my background layer disappear so I can't see what I'm selection or transforming. This happens randomly out of nowhere. I can be using those tools all day with no problem, and then out of nowhere it starts making things invisible.

There doesn't seem to be any other programs running that would cause it (not that that should be an issue, my computer could easily run all my Adobe programs at once if I wanted it to), and the only thing that seems to fix it so far is restarting Photoshop. But that gets old really fast when I have to do it over and over again. I tried calling Adobe, but somehow they're always closed, even during their supposed hours of operation.

View 5 Replies View Related

Paint.NET :: Moving Selection Tools

May 8, 2012

1) I open up a large image as background.
2) I add a new layer, then import a smaller image into that layer.
3) I try to select and move the smaller image so that it's positioned where I want it, but despite seeing the "nodes" on the side and corners and trying every possible combination of blue arrow/white arrow/shift etc., all I seem to be able to move across the canvas is the transparent box created by the nodes. In other words, I'm moving the box that contains the image, but apparently not the image itself.

Might this have anything to do with one image being a .pdn and the other being a .png?

View 1 Replies View Related

Paint Shop Pro :: X3 Selection Tools Not Working?

Oct 23, 2011

The selection tools, i.e. shape, freehand and magic wand, have suddenly stopped working. I do freehand, double click and nothing happens. The freehand selection actually disappears. I click magic wand and nothing happens.

View 3 Replies View Related

3ds Max Modeling :: Graphite Even / Odd Edge-selection Tools

Nov 16, 2011

i used to work a lot with polyboost and since the change from polyboost to graphite modeling tools, i built my own toolbars in max.to customize the interface, i found all the tools i needed in the polytools category.one big exception is even/odd selection presets (skip, nthselect / step), which i found an extremely useful edge-selection tool. i attach a screenshot of the polyboost tools rollout, where these settings could be found formerly. at the end of this message i also attach a dicription of these settings from the polyboost work. Where to find the command to launch this toolbox. or if this feature possibly was not included in the graphite modeling tools?

even
selects subobject-elements that have even numbers like 2,4,12 and so on. the "skip" spinner determines how many numbers to skip between the even numbers, so a value of 1 will select elements numbered 2,4,6,8 and so on. a value of 2 will select elements numbered 2,6,10,14 and so on.
shortcut: when used as a shortcut this tool will default to 1 as a skip value.

odd
selects subobject-elements that have odd numbers like 1,3,15 and so on. the "SKIP" spinner determines how many numbers to skip between the odd numbers, so a value of 1 will select elements numbered 1,3,5,7 and so on. a value of 2 will select elements numbered 1,5,9,13 and so on.
shortcut: when used as a shortcut this tool will default to 1 as a skip value.

nth sel
selects the next even or odd numbered element in the model. because of the way the numbers are laid out in a basic primitive in max, this will in a way duplicate the selection further down the element numbers. the "STEP" spinner determines how big the jump is to the next selection. if the "reverse(rev)" checkbox is checked the selection will be created in the opposite way, and if the "move" checkbox is checked the selection will not be duplicated, but moved instead.

View 5 Replies View Related

Illustrator :: Selection Tools Not Working Properly - CS6

Mar 8, 2013

The two selection tools in CS6 Illustrotor not working properly.  They don't select the object when I click and drag a box around them and the handles on drawing path won't stay highlighted when I use the direct selection tool so I can adjust them

View 3 Replies View Related

InDesign :: Selection And Type Tools Not Working In CC For Mac?

Mar 5, 2014

I have just recently downloaded InDesign CC (I use Mac OSX.9.2) and got the World Tools plugin to typeset in different languages.
 
However, I am having trouble using the selection and type tools. In about the first half of the file, the type tool displays the pointer/dashed box/I-beam icon and doesn't put the cursor in the text when I click on it. I can't click to select text as I should be able to, and if I try to click and drag, all I do is end up creating another text frame. But in about the second half of the file, the selection and type tools work the way they should.
 
When I click and hold on the type tool, the cursor changes to the crosshairs icon for creating text frames and the "W: H: " dialogue box for text frames appears.
 
How can I get the tools to work properly in the entire document?

View 16 Replies View Related

3ds Max Modeling :: How To Get Hidden Tools To Appear In Freeform And Selection Tabs

Apr 26, 2012

So I have the modeling ribbon but the only tabs that seem to have any tools in them are the "GraphiteModelingTools" tab and the "ObjectPaint" tab. How do I get the hidden tools to appear in the "Freeform" and "Selection" tabs? Does the plugin need to be added?

View 1 Replies View Related

GIMP :: How To Change Style Of Outlines Of Selection Tools

Dec 21, 2012

back in 2.6 the width of the outlines of the several selection tools wassimply 1px (running ants by themselfes), now with 2.8 (at least herewith OpenSuSE 12.2, XFCE 4.10 it is 3px (pls. see attachment (8 time se larged)).

Is there any possibility known (style setting for gtk, ...) to change it(back) to 1px? It would work make much more precise ..

View 1 Replies View Related

Photoshop :: Inaccurate Rulers

Nov 7, 2006

I'm running CS2, and when i open a document of any type the size of the image isn't accurate. For example: when i open an image of 800x600 pixels and set the magnification to 100%, i should easily be able to see the whole image on my screen, however i can only see a small section of it. To view the whole picture i have to reduce the magnification to 25%.

When i look at the rulers at 100% magnification an inch for example displays as more like 2 inches.

I'm using a 20" monitor with a resolution of 1680x1050 so there shouldn't be a problem viewing these images at 100%

View 1 Replies View Related

Illustrator :: Turn On Ctrl Shift Alt / Space Bar Options For Selection Windows Like It Works With Shape Tools?

Nov 27, 2012

Is there a way to turn on the ctrl shift alt and space bar options for the selection window like it works with the shape tools?

View 2 Replies View Related

Photoshop :: Inaccurate Marquee Tool

Apr 2, 2012

I've recently upgraded from Photoshop cs3 to cs5.1 and have noticed that the marquee tool's selection is not as accurate as I'd like. For something simple like drawing a selection around a square I could previously do this down to the exact pixel with a single click and drag. My process (while working at 100%) now goes like this:
 
i) Choose which bit of the cursor I place in the top left of the square to trace (I use the black inner lines)
 
ii) Click and begin dragging and see that the selection in the top left is now 1 pixel down and 1 pixel to the right of where I clicked.
 
iii) Drag the selection to the bottom right of the square and align the inner lines of the crosshair
 
iv) Release the mouse button. The top left corner now springs back into the originally clicked position (good). The bottom right corner now jumps up to 2 pixels up and 2 pixels left of the actual corner.
 
 I am left trying to approximate how far past my object corner I overshoot in order for it to be correct when it 'jumps' back. It feels as though I'm getting similar selection errors as if I was working at a random image zoom such as 337%

Jumping problem is the same if 'snap' is turned on or off...The problem occurs at 100% and is marginally improved at 200% - although I can't get an accurate selection in 10 attempts.Also in cs3 the Marquee tool's crosshair was 1 pixel thick and now in cs5.1 it is 3 pixels thick due to the white outline around it, I find this harder to use and unable to switch off.Selecting cursors 'precise' in preferences doesn't fix it

View 7 Replies View Related

Photoshop :: PS CS Exporting Inaccurate Colors

Apr 11, 2005

I've been noticing in PS CS that when i SFW (save for web) or just plain 'save as' the colors always end up a bit lighter than the original. I have no idea what is going on, i've never played with the settings so I'm not sure what changed, and i thought it might have been the color modes (mode = RGB, working proof setup = cmyk) but nothing seems to make a difference. It could be that the document mode is RGB and i'm working in a proof setup of CMYK, but I don't know enough to tell. I would play with it some more, but I don't know what is default and what isn't. Its really a pain to have inaccurate colors when exporting, especially when working with gradients or light colors, where they are subtle already.

View 6 Replies View Related

Photoshop :: Move Tool Is Very Inaccurate When Selecting Object

May 15, 2013

there's an invisible 10px border around each object/shape. it's so frustrating when i'm working on small icons or whatnot.i'll try and give an example the best i can... say i have two squares overlapping and are offset from each other by a 5px or so. if i want to select the back square, i'd normally... click on the part of the square i can see. in cs6, if i just click on the visible part of said square, it would select the front square. i have to click at least 10px out from the back square to select it.

View 10 Replies View Related

Photoshop :: CS6 Installed On Windows Vista 64x Bit - Inaccurate Metadata?

Jun 23, 2012

I have CS6 installed on Windows Vista 64x bit. Everything is fine except for some inaccurate metadata. Camera raw v 6.7 is displayed instead of the latest installed ver 7.1. Also lens serial numbers are not shown or are missing. In lens specification f/0 shows up which of course is wrong.

View 2 Replies View Related

CorelDRAW X5 :: Inaccurate Export To Bitmap

Mar 28, 2011

I have a bunch of objects on a CorelDraw page that together make up a button for a web page. I select all the objects: the toolbar tells me that the selection is 281px x 59px.

I press Export, selected only, the preview comes up. My button suddenly is 283px x 61px. Looking closely I can see a faint border around the actual button image.

What setting do I have to change to make it export what I tell him and not what he thinks?

View 5 Replies View Related

GIMP :: Inaccurate Cursor In Toolbox?

Jan 8, 2013

Just got started with GIMP as a trial to see if I don't have to buy Photoshop since I upgraded my Mac from powerPC to Intel...

The problem: When I want to use a tool and put the cursor over it, a tool about 15 icons below it gets selected.

I get this with the mouse and the pen tablet.

I use Mac OSX 10.8.2

View 2 Replies View Related

AutoCad 2D :: Inaccurate Nearest Osnap

Oct 22, 2012

My "Nearest" osnap is not even close to snapping to my circle. All other snaps are working fine, nearest snap are working on lines and rectangles, not at all on circles.

Image attached.

View 9 Replies View Related

AutoCAD Civil 3D :: Inaccurate Grading Volumes

Aug 29, 2012

I have noticed that the value I get when I use the surface volume comparison tool or look at a graded item in the grading group properties box is different than if I calculate it by hand and the discrepancy isn't even consistant.  After spotting this problem in a job I am working on graded two simple ponds to check this.  The first one is 100' x 100' and 5' deep w/ 2:1 side slopes.  Calculating the volume by hand I get 1500 cu. yds but the grading group properties come up to 1506.17 cu. yds.  The accuracy is off by less than 0.5%  The second pond is 100' x 100' and 2' deep with 3:1 side slopes.  The hand calc gets me 654.52 cu. yds. and the grading group properties reads 655 cu. yds.  This discrepancy is closer to 7%. I really need to know if I can trust the volume tools in the program. 

View 9 Replies View Related

Photoshop :: Can't Access Tools / When Click On Corner Of Individual Tools

Nov 25, 2012

i have cs5 suite. last week everything fine in photoshop. this week, only the tools that are showing are available to use. i can not access the tools when i click on the corner of individual tools. i am running version 10.6.8

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved