After loading a photo and creating a new layer so that I can make adjustments I don't seem to be able to select a tool eg a brush. Every time I move the cursor into the photo it returns to being the little hand icon and therefore won't let me paint (or do anything to the photo.
View 3 RepliesI'm a photoshop noob and I just purchased the CS3 version.
I've been experimenting with different texts and styles and everything was going fine until..
I must of hit something by mistake but every time I click on a new tool icon on the left hand side (like text or brush for example) it doesnt come up. When I mouse over my image all I get is the hand icon. Its like stuck on the hand icon or something. I've been trying to figure it out for the past 20-30 min.
Closing photoshop doesn't fix it either. I'm thinking I must of put myself in some special mode or something. The tool will be highlighted to the left..but like I said all that shows up when I mouse over is a little hand icon.
The CS6 mixer brush stops painting and turns into a hand icon, with only the index finger out, when I paint near the top left of my screen. It's about 3 inches from the left and 2 inches from the top.
I don't have this problem in CS5.5/CS5.1 or CS5 . what the hand icon with only index finger out is for? It's not the move tool icon. I should also add that I'm using Win7 and a Cintiq. and I should add that the standard brushes don't have this problem in CS6.
When I point over any opened image, I just see a hand, even if I have a tool selected.
Non of the images are Read Only.
I'm on CS6 on a year old iMac. Plenty of RAM and memory. For some reason all of a sudden, the tools on the left hand side of the screen won't work. All I get is the hand. What I hit or what happened. I've re-started PS, the computer and reset Bridge. How to reverse what happened?
View 2 Replies View RelatedWhen working on a document the Hand tool comes up and will not allow me to change tools. How do I get rid of this Hand too?
View 6 Replies View RelatedI've just installed the adobe illustrator CS5 on my mac os X Lion 10.7 and now when I open an .ai document or try to create a new one The only tool I can use is the hand tool. When I try to click on another one the hand comes back automatically when the mouse is on the document.
View 6 Replies View RelatedTill this time I used to work mainly with Photoshop regards to creating web sites, or adjust photo, photo manipulation etc. Now I ve got a very nice task ahead of me- to design minimalistic outline icons set- approximately around 10icon for web design.
Struggling which tool I should use- I need really nice curves to reach nice sexy icons:) What kind of tool and techniques used when you are designing icons? like those?
[URL].......
I've tried using the union tool in AutoCAD 2013 as well as the Boolean join function in Inventor Fusion 2013. In AutoCAD it doesn't let me select more than one object (says that the array is the only object and that individual unit blocks are duplicates). In Inventor Fusion I can't seem to get the hand of selecting the target & tool bodies.
View 1 Replies View Relatedmy CS6 keeps crashing constantly. Sometimes it's after I click a tooltip, sometimes it's when I save, sometimes it's when I use a keyboard shortcut. I get the same crash report every time:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 13.0.0.0
Application Timestamp: 4f61c045
Fault Module Name: atio6axx.dll
Fault Module Version: 6.14.10.10834
[code]...
Using Autocad 2013 I'm having this massive slow down when I choose a tool such as trim. All I have to do is select the trim (or chamfer etc) button for example and it's as though I get a framerate of about 5. I've never had a problem in 2012.
Rough pc specs:
win7 x64
8gb ram
i3-2100 3.1ghz
amd radeon hd 6700 (latest drivers installed)
The pc specs are fine - perhaps an issue with the graphic card?
I upgraded to Lightroom 4.1 a few months ago and since then have been battling with incredibly slow spot removal tool, slow changes between tools and modules, and a big time lag in using the slider adjustments. I use Lightroom for Portrait photography work and it is incredibly frustrating. I feel like my workflow is half the speed it used to be because of all the wait time. Once I select an area for the spot removal, for example, I can wait about 2-4 seconds for it to work. I find that this lag is shorted when I first open Lightroom and begin using it, but the lag time quickly increases as the hours literally drag by. Are other people having these issues after upgrading to Lightroom 4?
View 1 Replies View RelatedI have a modeled right hand part and a detail drawing of that right hand part with a pin that defines r.h from l.h. and I would like to save them as a left hand part then change the model by reversing the pin. How would I proceed with this task?
View 3 Replies View RelatedWhen I loaded some photo actions into my new PSE11 it show only a generic icon in the effects palette, not the icon from the maker so it takes extra time to search for the action I need. How can I get the icon from the maker to show as the icon in the palette?
View 3 Replies View Relatedwhy does the update icon always stay on the photoshop 10 icon on my desktop?
View 3 Replies View Relatedi have cs5 suite. last week everything fine in photoshop. this week, only the tools that are showing are available to use. i can not access the tools when i click on the corner of individual tools. i am running version 10.6.8
View 1 Replies View RelatedI need to convert a PNG image to an icon in Windows icon format.Can I do that in XDP7?
View 9 Replies View RelatedI am having a problem with a delay in selecting an object and selecting a command.
When I select an object the pointer has at least a 3 second delay before it starts moving around normally again. It is the same with selecting a command. This has started to get tedious. It has worked fine in the past so I don't think it is a RAM/graphics card problem.
I instal form SDK User Tools because I need in Inventor Drawing Tools (Revision cloud). I do this install like on website Autodesk show and I didn't get it on ribbon. I do also registry of this plugin but I also didn't get it.
I used Invenbtor 2013 with servce pack.
OK, today, or actually just this afternoon I've noticed it has become much harder to select items with the mouse.
Points, nodes, etc...anything where you'd typically hover the mouse over the item and it highlights for you to select it.
For example, lets say you want to project a point from another sketch, or select the center node of a line, etc.
Never really had an issue until this afternoon where now it seems I have to be right on top of the item and I cannot budge one bit or it won't select it. It is now taking me numerous attempts to select things like points (zooming in does not work, points scale accordingly).
Is there a setting somewhere? I can't seem to find such under Tools>Application Options and the like.
How or where I can get the Detail tools that was in the 2013 Tool Palette?
Batt insulation
drywall
Plywood
studs
pretty much everything you need to build a detail. Where are these tools?
There seems to be way too many tools in the tools panel for me. Many of them I will rarely, if ever use. Is there any way I can rearrange or remove some of them? It would unclutter the screen immensely.
View 8 Replies View RelatedI have an interactive board with tools (such as pen or eraser) which I want to integrate with the AI. The typical scenario woulld be as follows: the user lifts the pen from the tray, the pen event will me mapped into selecting Pencil Tool from AI toolbar after which the user can add freehand annotations to the AI document.
Is there an API which would allow me to map abailable hardware tools with relevant AI tools? Is there an example which would demonstrate such integration?
How to get the 'Shape to Block' command to work (under express tools).
It says select object, but no matter what object I select eg. circle, pline or line, it says invalid selection. I am running AutoCAD 2012. Are 'shape' objects somehow different from any other objects?
I've just found a copy of Photoshop cs4 at a price I might actually be able to afford. I'm a little worried that there might be a problem with the activation code though. Is anyone here using a second hand version of photoshop or has anyone had a problem reactivating a product. Any help would be greatly appreciated. It's still quite a lot of money to shell out for something that won't work.
View 2 Replies View RelatedI am able to use the menuload command to load the express menu, but when I try to execute one of the express tools. AutoCAD say invalid command, there was something on the website that said to type express tools at the command prompt, but when I do that, too it says invalid command.
View 5 Replies View RelatedOn any picture I bring up, it has a hand. Regardless of the tool, a hand appears on the screen. I reset the toolbar and still appears.
Any ideas?
how'd they do this?
(both the hand and the balls, more the hand)?
i have recently upgraded my computer with a new mb, 8gb ram, clean install of vista 64 bit and cs4. after initial problems with screen lag i installed a new graphics card and all seems to be working fine. problem is using the hand tool. i was accustomed in cs3 to comparing two files side by side, let's say the same image with two different levels of sharpening. i was able to view both images at 100% and using the hand tool move each image independently. this made comparing particular areas of the images easy. in cs4 when i open two images and use the hand tool it moves both images at the same time.
View 1 Replies View Relatedi'm working on something that the hand tool is constantly selected? You know the white hand tool (H). If I try and select any other tool..I can't select it as the hand tool wont change
View 1 Replies View RelatedMy cursor is showing the hand tool no matter what tool is selected. And the tools of course do not work then. PS restart does not help, I have to restart the PC (Vista 32 Ultimate).
I read about this problem many time in the web. Why isn`t there any solution? Even CS4 11.01 has this bug.