I found a website which i really like because of its graphic design techniques... And ive got a question about how to kind of simplify images, ive attatched a link to an head logo of the website and im just wondering how the designer has achieved the effect of making the bridge, city and train look almost like a painting ?
View 2 RepliesBefore using the quick selection tool, I am able to smoothly zoom in and out by holding Ctrl+Space and dragging with the mouse.If I use the quick selection tool, however, the marching ants line turns into a strange box. I no longer am able to zoom smoothly but instead with the technique above I draw a rectangle which I zoom into. This indicates to me, that OpenGL has been deactivated. I want my smooth zoom back!
I noticed that the preferences always show OpenGL as active, no matter which of the above "state" I'm in. I tried updating my AMD graphics card's driver without success. I found a post describing similar OpenGL problems on the same graphics card and installed the linked driver; the post was 2 years old, but it worked. Re-installing more recent version (Catalyst-Version 12.6) brought the problem back. Newer versions of the driver seem all to suffer from the same problem.
I'm using Windows 7 64-bit,64-bit Photoshop Extended from CS5 Production Premium,AMD Radeon HD 4600 (currrently Catalyst-Version 13.1).
I tried: "Downgrading" the driver (only really old version worked, as mentioned above),reseting Photoshops preferences (Ctrl+Alt+Shift at start),deactivating OpenGL (reactivating only works after restart and problem reappears) but I miss the smooth zoom.
When I want to edit the annotation scale of an object, the dialog box seems to open, but I cannot see it. I copied my profile from my computer with two monitors, so I suspect that is the problem. I tried Alt + down arrow, then right and left arrows to see if I could find it, but that did not work. CMDDIA is 1.
View 1 Replies View RelatedThe second sub (NormalTest) below creates the ClientGraphic and the first sub (NormalTest_MagnitdureChange) attempts to lengthen the associated LineSegment in the Y direction so you must select a face along the XZ plane so the before running the second sub so that the line segment runs only in the Y direction. That said, when I run the first sub its 2 MsgBox display the before and after coordinates which does display the ending points Y coordinate doubled but graphically there's no change. If you run the first sub again you'll get the same results meaning the double length did not take the first time this sub was run even though oLineSegment.EndPoint.Y has changed according to the after MsgBox from the previous executing of the first sub.
Public Sub NormalTest_MagnitudeChange() Dim oPartDocument As PartDocument Dim oFace As Face Dim oClientGraphics As ClientGraphics Dim oSurfaceEvaluator As SurfaceEvaluator Dim adPoint(2) As Double Dim adParams(1) As Double Dim adGuessParams() As Double Dim adMaxDeviations() As Double Dim aoSolutionNatureEnum() As SolutionNatureEnum Dim adNormals(2) As Double Dim oVector_Normal As Vector Dim oLineSegment As LineSegment Dim oPoint_Normal As Point Dim oGraphicsNode_CurveGraphics As GraphicsNode Dim oCurveGraphics As
[code]....
I am building a logo and as a part of that I want to have an image of the earth like the Mozilla, firefox logo, but I need a complete image of the earth to start with.
how I would go about creating such an image. Should I start with and actual photo of the earth? What kind of filters should I research to create a globe similar (though not necessarily the same colour) to the firefox logo.
I have a Word doc that I was sent with translations of some text I need for a photoshop file. the text displays fine in Microsoft Word for Mac 2011 (on a Macbook Pro 2012 model) but when I copy it into photoshop CC one of the characters is replaced with a box...
View 2 Replies View RelatedI am trying to use Create Simplified part and during the creation process..I downloaded a model of a FD breaker off the Eaton Website in .stp format. I am simply trying to get a .ipt file of the model for my layout model.So the steps I did:
1- Open .stp file
2- Save .stp file as an .iam inventor file (ignore the prompt box "this is not a part file", that is from my logic rule for a part file)
3- once saved in inventor format, I click the simplify tab, select create simplified part, select a name and directory and press save
4- the .iam saves into a single part, BUT it is saved as sean.ipt, not the part number I assigned earlier and it is saved to the directory C:Users, not the directory I assigned in the dialogue box earlier.
Why does it do this every time I "dummy" down an assembly to a single .ipt file?
I'm trying to create a simplied part of a conveyor. It's not too big yet, just over 7000 occurrences - see attached. Yesterday after about 5 hours I crashed Inventor (2014) and tried again. Eventually I let my PC run through the night and this morning it had completed the task. To save took almost 2 hours, producing an *.IPT of just over 830MB. When I restarted my machine (to free the RAM again) I could not open, getting a serious error.
The old shrinkwraps seemed to work way better. I need to create a "dummy" model which breaks all links to the originals assemblies so no one can tamper with it.
My specs:Inventor Professional 2014, 64 bit edition, I've got an HP Z400 desktop which is a 3.2GHz Processor with 4 cores, 12 GB RAM. NVIDIA Quadro 4000 graphics card.
I have a user who needs to be able to enter Chinese characters into AutoCAD 2010. The characters display properly in Windows, but AutoCAD cannot recognize them. I believe I need a language pack. Where can I find the official 2010 AutoCAD language packs? I don't see them in Subscription.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
I am teaching myself Illustrator CS6 and have just created a complex image on one layer (contains about 145 different elements).
I now want to simplifuy the image so that I can use the 'knife tool' to cut and move a segment of the image (imagine an expanded pie chart).
I know how to convert the image so that instead of just one layer with multiple paths... I can have every element on its own seperate layer... but I can't find a way of flattening the layers in to one simple image.
I need to open a 4 page PDF that was originally created in word in Simplified Chinese. But when I open the PDF in Illustrator with Simplified Chinese open, some of the characters change. My client in the past has had success outlining the chinese before she sends. But it is no longer working for some reason. How can I match what I see on the PDF without having to convert it to a rastered image.?
View 5 Replies View Relatednote that the command "create simplified part" is not firing onpopulatefilemetadata event.
I would expect it to.
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
where I can find script/plugin/software for making images composed of images. I'm desperately needing this for an non-profit assigment. Any help would be very much appreciated!
I'm looking for a script, software or photoshop plugin or anything that could help me with this.
What I want to do is this: Out of ~ 1000 pictures I want the software to arrange them into visualizing an image which I have choosen.
I am in the process of completing my Photographic website and need to make thumbnail and larger sizes for the the site. The site will have approximately 100 images on it. Clicking the thumbnails will connect to the larger images. How do I make both sizes in PS CS? Perhaps their is a generator that you would recommend for Mac 10.2?
View 3 Replies View RelatedI am attempting to combine several images into a collage of reduced-sized images that can be expanded when clicked on
View 1 Replies View RelatedA long time ago, when I was using Photoshop Elelments I found a plug-in that made it possible to work with stacks as a unit.
If I labeled the top image in the stack that lable was applied to all the images in the stack; then I could sort the the image on top and all the images in the stack would stay together, or if I deleted an image in the stack all the images in the stack were deleted. Without it I have open each stack I lable and apply the lable, so when I sort the stacked images they stay together.
I need to convert color images of vehicles to monotone images. When done correctly they will look like the car has been primed in preparation for painting.
Conversion to gray scale does not do the trick.
I'm making a collage containing 4 images with different resolution. I want each image to have faded edges (to white) and I'm using gradient tool to accomplish this. The problem is that since the images have different resolution the gradient tool gives different result on each image even though I make the same "swipe". Is there another way of accomplishing these faded edges, equally looking and of the same size? The faded edges (to white) will, as you might have understood already, constitute the limit between the four pictures, that is, a white cross.
View 1 Replies View RelatedHi, I am starting a new business making art prints for artists. I have purchased this huge printer ... just got it. I've been studying photoshop for months using "classroom in a book" and am finding out that I've probably studied the wrong thing.
I have three questions and thanks in advance for any of your expertise.
1. I successfully printed out a two foot by two foot photo I took of my husband with my 8.2 megapixel camera. Then, tried to print out another photo.... used the same photoshop settings, but the print was 6 inches by 6 inches...... I did notice that the second print was only 16. %... I wondered if that caused the difference in size? How do I set that to 100 % if that is what is needed?
2. I want to print out multiple small prints using this big paper and printer... I want to tile these various prints (all different) along the top making rows... I want them to be all different. I called Epson support and they said I could do that in photoshop. Do I use the browser?
3. I have a wide format scanner. It does up to 11 x 17 inches. If I have something larger to scan, let's say, I scan the bottom of the image and then scan the top of the image, how do I put them together?
Just installed Lightroom 4, more than 60000 images were imported. Many of them were duplicates, triplets and so on. I want to have a clean, unincombured library. Should I delete the 60000 images and reinstall the images from my photo digital cards or use the slow process of "X" out the unwanted images? I would like to start improving my images vs removing the unwanted images.
View 2 Replies View RelatedI've been having problems selecting images in the library module when multiple images are in view (not down in the timeline, but in the main window). It seems sporadic with which ones it won't let me select, it somehow manages to be the ones that I need to click....!! I just literally can't click it as if it were an image I already imported or something, but it's not grayed out like that. I've been having to select a nearby image then use my arrow keys to navigate to and click the image I need.
View 2 Replies View RelatedBut I wouldn't be able to upload a hundred tiny, plain images. I made this to add onto the background removal FAQ. I hope it's accepted.
[URL].......
(Image is clickable.)
Lightroom will not display preview images during import of raw images. Any images in other formats display fine but with raw images I get a gray window the size of the preview image and the words "preview unavailable for this file".
Running Windows XP 64, Lightroom 3.3.
In Lightroom 4.1 when rating (flags, stars or colors) a selected group of images all images selected will have the same flag applied. For instance if I select 10 images to view in the survey mode to compare and select 1 to be flagged as rejected all 10 will be flagged rejected, not just the one. Is there a way to turn this off to select a group of images and flag each differently?
View 2 Replies View Relatedlet's say I have a page with 6 images and 6 captions. is there anyway to crop out more than one at a time and save them? Currently I have to crop out all but one, then save that one, then reload the image and crop out another one and save etc over and over. is there a better way?
View 4 Replies View RelatedI am working on pdf file, in which all the assets has been created in illustrator. I am opening that file in illustrator, and by save for web option exporting the images. But somehow the images as not proper. There are some colour related issues and also the images are not proper.
Is there any other way around so that I can extract those without loosing the quality ?
I’ve been looking for over 2 hours now how to do this and I’m still no better off, however I have learnt a few tips here and there,so I’m totally new to gfx stuff but i know how to make an image transparent.
i want the logo on the image but i dont understand how too?? ( with out getting all the grey and white boxes (around the logo on the greenhouse pic which goes white once i save it) i want the image background to still be there.
Importing images from specific folders is including images from outside selected folders.
View 3 Replies View RelatedHow do I put images that have been altered in PS together with my images altered in LR4 to make a slideshow. They are currently sitting in LR in 2files and I simply don't know how to combine them
View 12 Replies View RelatedI was learning about the layers and masks and i seen that i have to have two images under each others under the layer option panel, i tried many times to add images but it always shows in two different panels as the following image I want to add two different images in this panel to make any changes i want.
View 3 Replies View Related