I am new to Video on Photoshop CC but use it loads for photos, anyway, I have made a video in Timeline of Photoshop which is made up of various scenes all of which have adjustment layers etc. The whole video is 335mb and 5 min long.
I am now in process of rendering it and so far has taken 3 hours and is only half way through. I am saving as a video for YouTube in their 720HD format.
It used to be that when rendering a timeline, there would be no lag between rendering the first and second videos. Now, between each video there is about a 30 second transition before the next video begins rendering. Anything that would have caused this, or is there anyway to prevent it? If I am rendering a timeline with 60 clips that need rendering, this can add a significant amount of time.
View 1 Replies View RelatedFrom several .vsp-projects to output/convert/encode/render single video files (Videodatei erstellen) in Batch with one film template (Filmvorlage)
DVD authoring was yesterday - today is streamed from the NAS to the TV. So I now render video projects (.vsp) in VideoStudio as individual files (Videodatei erstellen). With Full HD 50p projects which lasts a few minutes and I can not cut in this time. With several hundred clips from vacation it sucks.
Hence my request for a new batch function for the encoder of VideoStudio: Several .vsp-files to be issued in Batch with a self-defined film original/template (Filmvorlage).
In LR5 Library is there a way to sort videos/movies by their length of recording time. I would like to focus on reviewing and getting rid of short length videos that I won't need.
View 5 Replies View RelatedI m trying to render a time lapse video on PS CS4 and the process works well up until the export window. When i go there the first option under file options, quick time export, is unavailable( grayed out). The only available option is Image sequence. What do i have to do to enable the quicktime movie creation or any other movie format for that matter?
View 2 Replies View RelatedI have a problem with After Effects being unable to process image files in the correct order when making time-lapse videos.AE seems unable to identify the correct chronological order from the camera generated file names and the files need to be re-numbered with a number prefix.
However sometimes even after re-numbering AE still cannot order the files correctly and will generate a video with either individual or blocks of frames out of order.
I have another app (Video Velocity) that can also suffer exactly the same problem and which will often process a video with the exact same individual or blocks of frames out of order as AE.
However VV has options to order the files in various ways including ‘sort by file create date’ in which case the time-lapse video will be processed correctly. AE doesn’t seem to have this option? Or does it?
I have vs 11.5 and dvd movie factory7. When i am burning a mpeg2 file in dmf7 its burning the file faster. When i try to burn the same file in vs11.5 its take hours.
View 4 Replies View RelatedI am really messing my model,.. am using 3ds max 2010,. my problem is when i render my animation in active time segment my first frame seems ok,. but as its goes on the lights looks fading or turning it off as it goes by i already check the "compute advance lighting when required" and nothings change,.. let me attach some pics.
the first pics is frame 0000, the second pics is 39th frame,.. if you take a look on white materials they turned grey,.. and in frame 200 the lights are really out i cant show them any more cause i deleted them and when i render in range (i.e.) i start in 40th frame the lights or materials came perfect but again if goes by the result fading let me attach the 40th frame using "range".
Is there no way of reducing the time?. I understand that this process involves solving of differential equations for reflection of light from various materials in the building etc. Can it not be done through Autolisp instead of going through .NET languages. Common Lisp is also a powerful OOP language. If Alisp cannot do it can Autodesk implement CL and cut short the time?.
View 9 Replies View RelatedI have just taken some short video clips and put them together in a 3min 40 second video. When I tried to save it to my desktop the rendering took a little over an hour. This is my first try so I am really a newbie Is it normal to take that long to render? I was planning on making 20 to 40 minute videos but at an hour for every 3 minutes it may not work.
View 3 Replies View RelatedRecently we bought numbers of Revit Suite 2013 and expects the best performances from it. but, regretably speaking the rendering time is worst than before upgrading.In addition to that, we also upgraded our Workstation to 16 GB RAM and a QUADRO graphic engine, but it still take more than an hour to render one simple view.what could be the cause? i hope it is not the software that we bought( cost us thousands... ) here i post the rendering screen and the task performance while we are rendering,ASAP reply needed as all our REVIT workstations moving away from our deep expectation.
View 1 Replies View RelatedI have noticed this as an occasional random ongoing problem in Lightroom and just encountered it again in LR 5, running on Win 7 64 on a 30" 2560x1600 monitor. While the develop view renders properly, the louple view is very soft. Here is an example:
1:1 from Develop
1:1 from loupe
There is no indication that you need to wait for the final rendering and the image never gets sharper. Zooming in and out does not fix the rendering in loupe view. Resizing the lightroom window to a smaller size does not work. Rebuilding 1:1 previews does not work.
The only thing that works is to close and reopen Lightroom. It appears that some flag in the program instructing the loupe rerender sometimes does not get set.
This is a serious problem because a user could easily decide to delete an image based on the loupe view. This has forced me to preview all my images in PhotoMechanic. I simply cannot rely on Lightroom.
This is a difficult problem to reproduce as it seems to happen randomly. In a search and based on recollection, the zoom in and out seemed to fix.
When i´m rendering out a video with still images (timelapse) i use Timewarp. I like to have Timewarp at 50%, but then i only get rendered half the images. If i have 500 images, only 250 gets rendered to the final QT-video. There must be a way to get all images in the video??
View 13 Replies View Relatedwhy i cannot change the color of the background when rendering? It is always black, and i cannot attached or make new material, if need to attach jpeg or new texture on my drawing, cannot create new material. what should i do? im currently using autocad for mac 2012.
View 1 Replies View RelatedOk some times when I go to run details it pops up that it can not load the component database AecDtlComponents (US).mdb file. I go to options and can not do anything there. So I have to close it all down and hope when I reload AA it works. 9 out of 10 times it does. But this is a pain to do when ever you need to add detail stuff. Oh also this happens on more then one computer in the office. running 2012 with sp and all updates on windows 7
View 8 Replies View RelatedI'm trying to change "capture time" of multiple photos to a specific time.
I know that there is "Edit Capture Time" feature under Metadata. But when I try to edit multiple photos, it says that "Modify the capture time stored in the selected photos by entering the correct time adjustment for the photo displayed to the left. Other photos (but not vidieos) will be adjusted by the same amount of time". And it really does.
For example,
If A file's capture time is 1/11/2011
B file's capture time is 1/11/2012
C file's capture time is 1/11/2013
I would like to change their capture time to 1/11/2014. All the three files.
But the current "Edit Capture Time" feature of Lightroom just adds three years to each file like this:
A file's capture time -> 1/11/2014
B file -> 1/11/2015
C file -> 1/11/2016
So their capture times remain as different ones. And this is not I want...
I've googled a lot and tried several programs other than lightroom as well, but the "Capture time" recognized by lightroom could not be changed by other programs.
I am updating capture time based on GPS Time (a bit OCD, I know) but when I change Capture Time the Date Time Digitized value does not change. This in in LR 4.3 and is not affected by whether on not the Catalog is set to 'Write date or time changes into proprietary raw files'.
View 8 Replies View RelatedI have been trying to figure out if I can make capture time changes to adjust for time zone errors or the daylight saving time mistakes where the capture time in the Metadata panel is off by 1 hour or so, and then have these adjustments saved permanently to the original files (master photos). This works for JPEG files and it also works for DNG files (after converting from CR2 to DNG). But it doesn't seem to work for CR2 files directly. If I used the "Save Metadata to file" option from the Metadata menu I might just get sidecar XMP files.
Then I found this option "write date or time changes into proprietary raw files" in the Catalog Settings. This seems about right. But what does it do? I tried enabling that, created a new catalog and then imported some new CR2 files. I then changed the captured time and tried the Save Metadata to file option. It still spits out these sidecar files. It doesn't actually write this to the CR2 files.
Or does it? Perhaps I am not seeing it in Windows Explorer? Like IPTC vs. EXIF? I'm not sure Windows reads both. These are like different types or sections of metadata information about a file. So I just wonder what the benefit or consequence is of having this option enabled? Whatever it is, it is not very apparent. And as you can see from the screenshots above the capture time has not changed (not been saved) when you look at the file in Windows Explorer. Any changes are held in the XMP sidecar. Even thou I have enabled this EXIF option in Catalog Settings.
I note that from time to time I can't see the counter and this is quite an annoyance. When the invisible pointer hover over or passes over an object, the latter will highlight as usual. I have to close and restart the drawing each time due to this issue. Is there an explanation for it, even a solution to prevent this from happening?
NOTE : This is limited to the drawing area only. I can see the pointer in the menu/toolbar area and outside autocad but not in the drawing area.
I want to add a watermark to a photo which encompasses a progress time or finish time of a sports event. For example, if an event starts at 7.00 am, photos taken at 8.05 am, in the watermark I want to display 1:05 hr (or 65 mins).
View 1 Replies View RelatedI cant open videos in Photoshop - The videos is .MOV so it should work...
View 1 Replies View Relatedwhy I can't open a video in Photoshop CS3? It's an MOV file, filmed with a digital camera. I try to do file>import>video frame to layers, and I get an error that says I need Quick time 7.1.
Can't find anything on-line that explains it properly.
I own Photoshop CS3 and would like to know which product could be used to acheive the following:
1. Inputs
--- 4 2D images (in GIF, JPG, PNG or TIFF format) that have all 4 sides.
2. Output
--- 3D model using the 4 side views and create an video animation that can be used in standard format video files.
If this requires multiple steps and products, would like to know the same. It would be nice to understand which step or product can achieve which part so that I could replace that with other products if needed.
The videos I take with my Leica D-LUX 5 do not import into Photoshop Lightroom 3. The still photos import fine. What can I do to fix this?
View 1 Replies View RelatedI loaded an MP4 into Photoshop CS4 and edited some frames. (I'm on a Mac OSX)
Now I need to save the video file. I tried to save the video file as an MP4 and AVI leaving default settings alone. However no matter how I saved the video it looks all pixalated, or save as a much smaller video size and still all pixelated. How do I save an exact copy of my video with the edits I made?
I get an error message in PS CC whn I try to open videos that I can't do so in my version of windows. Why since I am able to open the same videos in PS CS6.
View 20 Replies View RelatedI've been trying to import video as layer but it's not working. I have windows 7.
When I tried with my MPEG of AVI videos, there's just a white screen where the video should appear and they don't work in quicktime.
When I looked up how to fix this it told me I should convert the video so that it's an MP4 that works in quicktime. So I did this but when I try to import, there's no option for MP4 format. This is the only option on the scroll down menu.
My friend got Photoshop CS6 extended so he could do a few things with his photos, he also wanted to try out some of the stuff with the video editing, and since it's the extended version, it should (at least in theory) import video, right? Wrong, no matter what format he converts to he gets an error telling him he's using the right kind of document. I have seen the photoshop video editor, my friend has seen the video editor, but we can't get it on his copy of photoshop because he can't get a video to import no matter what format he converts to. Is there a way to fix this or has the promise of video editing in the extended version of photoshop just been a lie?
FORMATS TRIED:
.3gp
.3g2
.avi
.asf
.DV
.mkv
.mpg (mpeg1 and mpeg2)
.mp4
.mov
.mts
.m2ts
.ts
webM format
.wmv
NONE OF THESE FORMATS WORK FOR VIDEO EDITING IN PHOTOSHOP CS6 EXTENDED. He can use it for photo but he really wants to try the video editor since he doesn't like movie maker and he can't afford any other video editing software right now.
I need to open videos to edit for my Photoshop class, but everytime I try it says "could not complete your request because the video file could not be opened.
I am trying to open [URL]...
I need to update my video card... How do I do that?
Adobe Photoshop Version: 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: AMD CPU Family:15, Model:1, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2, SSE3
[code]...
I have a Canon S100 and just started importing photos and video into my LR 4.3 catalog. I convert RAW to DNG, and the Capture Time on the photos in LR is correct. However, the video Capture Time is shifted forward exactly 8 hours. I know how to correct the video Capture Time, but is there anything I can do to stop this from happening in the first place? I looked at what the metadata looks like in Bridge.
PHOTO:
Date Created = Correct Capture Time
Date File Modified = The time I imported the file into LR.
VIDEO:
Date Created = Capture Time + 8 hours
Date File Modified = Correct Capture Time
How do I control time without using the Time Configuration Dialog box?
Also on a side note; what's the difference between the Dope Sheet and the Curve Editor?
3DS Max 2011
Windows Vista 32 Bit
Dell XPS M1530
Intel Core 2 Duo CPU T5550 1.83 GHz
2 GB of Ram