Is there no way of reducing the time?. I understand that this process involves solving of differential equations for reflection of light from various materials in the building etc. Can it not be done through Autolisp instead of going through .NET languages. Common Lisp is also a powerful OOP language. If Alisp cannot do it can Autodesk implement CL and cut short the time?.
View 9 RepliesSince older versions of CorelDRAW that I have set the recovery time for Auto-Backup saving time as 3 minutes only, in order to reduce the partial loss of job, when the program crashes.I'm doing a series of small illustrations vectorized (yes, hundreds of them!) and I intend to reduce this time for just 1 (one) minute!This time decreased in 2 minutes (from 3 to 1) can make a difference, because some of these vectors are made fast, and unless those two minutes, I may lose some illustrations if freezing or any other irregular behavior of the software and/or Operating System, though these illustrations are subdivided into several files (simple vectors) and do not consume a lot of RAM.
Reducing the time of Auto-Backup for just 1 min is a risk, or how it can affect the performance of the software or OS? Or one thing does not interfere to another? [URL]
I am new to Video on Photoshop CC but use it loads for photos, anyway, I have made a video in Timeline of Photoshop which is made up of various scenes all of which have adjustment layers etc. The whole video is 335mb and 5 min long.
I am now in process of rendering it and so far has taken 3 hours and is only half way through. I am saving as a video for YouTube in their 720HD format.
I have vs 11.5 and dvd movie factory7. When i am burning a mpeg2 file in dmf7 its burning the file faster. When i try to burn the same file in vs11.5 its take hours.
View 4 Replies View RelatedI am really messing my model,.. am using 3ds max 2010,. my problem is when i render my animation in active time segment my first frame seems ok,. but as its goes on the lights looks fading or turning it off as it goes by i already check the "compute advance lighting when required" and nothings change,.. let me attach some pics.
the first pics is frame 0000, the second pics is 39th frame,.. if you take a look on white materials they turned grey,.. and in frame 200 the lights are really out i cant show them any more cause i deleted them and when i render in range (i.e.) i start in 40th frame the lights or materials came perfect but again if goes by the result fading let me attach the 40th frame using "range".
I have just taken some short video clips and put them together in a 3min 40 second video. When I tried to save it to my desktop the rendering took a little over an hour. This is my first try so I am really a newbie Is it normal to take that long to render? I was planning on making 20 to 40 minute videos but at an hour for every 3 minutes it may not work.
View 3 Replies View RelatedRecently we bought numbers of Revit Suite 2013 and expects the best performances from it. but, regretably speaking the rendering time is worst than before upgrading.In addition to that, we also upgraded our Workstation to 16 GB RAM and a QUADRO graphic engine, but it still take more than an hour to render one simple view.what could be the cause? i hope it is not the software that we bought( cost us thousands... ) here i post the rendering screen and the task performance while we are rendering,ASAP reply needed as all our REVIT workstations moving away from our deep expectation.
View 1 Replies View RelatedI have noticed this as an occasional random ongoing problem in Lightroom and just encountered it again in LR 5, running on Win 7 64 on a 30" 2560x1600 monitor. While the develop view renders properly, the louple view is very soft. Here is an example:
1:1 from Develop
1:1 from loupe
There is no indication that you need to wait for the final rendering and the image never gets sharper. Zooming in and out does not fix the rendering in loupe view. Resizing the lightroom window to a smaller size does not work. Rebuilding 1:1 previews does not work.
The only thing that works is to close and reopen Lightroom. It appears that some flag in the program instructing the loupe rerender sometimes does not get set.
This is a serious problem because a user could easily decide to delete an image based on the loupe view. This has forced me to preview all my images in PhotoMechanic. I simply cannot rely on Lightroom.
This is a difficult problem to reproduce as it seems to happen randomly. In a search and based on recollection, the zoom in and out seemed to fix.
When i´m rendering out a video with still images (timelapse) i use Timewarp. I like to have Timewarp at 50%, but then i only get rendered half the images. If i have 500 images, only 250 gets rendered to the final QT-video. There must be a way to get all images in the video??
View 13 Replies View RelatedI m trying to render a time lapse video on PS CS4 and the process works well up until the export window. When i go there the first option under file options, quick time export, is unavailable( grayed out). The only available option is Image sequence. What do i have to do to enable the quicktime movie creation or any other movie format for that matter?
View 2 Replies View Relatedwhy i cannot change the color of the background when rendering? It is always black, and i cannot attached or make new material, if need to attach jpeg or new texture on my drawing, cannot create new material. what should i do? im currently using autocad for mac 2012.
View 1 Replies View RelatedOk some times when I go to run details it pops up that it can not load the component database AecDtlComponents (US).mdb file. I go to options and can not do anything there. So I have to close it all down and hope when I reload AA it works. 9 out of 10 times it does. But this is a pain to do when ever you need to add detail stuff. Oh also this happens on more then one computer in the office. running 2012 with sp and all updates on windows 7
View 8 Replies View RelatedI note that from time to time I can't see the counter and this is quite an annoyance. When the invisible pointer hover over or passes over an object, the latter will highlight as usual. I have to close and restart the drawing each time due to this issue. Is there an explanation for it, even a solution to prevent this from happening?
NOTE : This is limited to the drawing area only. I can see the pointer in the menu/toolbar area and outside autocad but not in the drawing area.
I am editing this block of seating:
Seats.jpg
and I was just wondering if there was a way of reducing the distance between the squares in one go instead of doing it individually?
I have a 3D model that consists of a large number of "small" objects that i created earlier in separate files. The problem is that now my model is 50Mb and I am having trouble working with it. Is there a way of reducing size, or is there any other solution that would not change the geometry of my model?
Working with Intel Quad Core, 6Gb of ram and ATI Radeon HD3800.
i have produced a drawing and have copped and pasted quite a few photograhs on it showing details etc. however bnow my drawing has a very large file size. i have purged drawing, it is the photographs
View 3 Replies View RelatedI have a problem reducing the number of points that are to dense. they are so close together they basically form a line. problem is that there are about 5000 points at the line were I want to be 50 of them. deleting them manually would take forever...Is there a command that can reduce no. of points at one area?
I have ACAD2008 Civil
I am having trouble 3d modeling an 8" to 6" reducing elbow.
View 8 Replies View RelatedI have just produced .dxf files from .shp files using Surpac. The problem is that the final .dxf's are that huge in terms of memory that is really dificult to open the .dxf with any version of AutoCAD
View 2 Replies View RelatedI am having a problem when exporting surface data into an .xml format using AutoCAD Civil 3D 2012. I am using LIDAR information to create a surface over an area of approximately 3 hectares in order to undertake future flood modelling. When I have created my surface in Civil 3D the overall file size is around 5MB, however when the surface exported to a .xml format the file is approximately 860MB. I have tried to create a new surface from contour information to decrease overall fle size but with no avail. Any recommendations to decrease the .xml file size without having excessive loss of accuracy for my modelling.
Lidar information that I am using to create surface can be found at URL.....
My intention was to convert a 3DS-File into an IPN-File, to use it in Inventor.As I did not managed to do this in Inventor, I importet the 3DS-File in CATIA V5 and converted it into a CATIA-CatPart and from there in an IGES.Then I was able to open it in Inventor and made a IPN out of it.
The PROBLEM: The original 3DS-File had 700 kilobyte but the actual IPN 54 MegaByte !
We were sent some step files of valves from a company - what would be the best practice to make this into (clean up) a useful part to be used in our assemblies. Interested in converting it into a useful part but reduced in size. (Compared to other valves we use - this is easily 10 times the size).
View 7 Replies View RelatedIs there a way to generate a frame with a variable cross section. I am trying to generate a frame with pipework that reduces in diameter (From DN250 to DN150 - See attachment).
View 4 Replies View RelatedI'm trying to change "capture time" of multiple photos to a specific time.
I know that there is "Edit Capture Time" feature under Metadata. But when I try to edit multiple photos, it says that "Modify the capture time stored in the selected photos by entering the correct time adjustment for the photo displayed to the left. Other photos (but not vidieos) will be adjusted by the same amount of time". And it really does.
For example,
If A file's capture time is 1/11/2011
B file's capture time is 1/11/2012
C file's capture time is 1/11/2013
I would like to change their capture time to 1/11/2014. All the three files.
But the current "Edit Capture Time" feature of Lightroom just adds three years to each file like this:
A file's capture time -> 1/11/2014
B file -> 1/11/2015
C file -> 1/11/2016
So their capture times remain as different ones. And this is not I want...
I've googled a lot and tried several programs other than lightroom as well, but the "Capture time" recognized by lightroom could not be changed by other programs.
I am updating capture time based on GPS Time (a bit OCD, I know) but when I change Capture Time the Date Time Digitized value does not change. This in in LR 4.3 and is not affected by whether on not the Catalog is set to 'Write date or time changes into proprietary raw files'.
View 8 Replies View RelatedI had a drawing of 64 MB size.Eliminating the single element and no element groups and optimising the block design we could reduce the drawing to 48 MB size.The drawing does not have layer filters, states and is purged completely. It contains links to an external database in which the attribute data is stored.
What else could be done to reduce the drawing size. The drawing response time is too slow as of now.
I have been trying to figure out if I can make capture time changes to adjust for time zone errors or the daylight saving time mistakes where the capture time in the Metadata panel is off by 1 hour or so, and then have these adjustments saved permanently to the original files (master photos). This works for JPEG files and it also works for DNG files (after converting from CR2 to DNG). But it doesn't seem to work for CR2 files directly. If I used the "Save Metadata to file" option from the Metadata menu I might just get sidecar XMP files.
Then I found this option "write date or time changes into proprietary raw files" in the Catalog Settings. This seems about right. But what does it do? I tried enabling that, created a new catalog and then imported some new CR2 files. I then changed the captured time and tried the Save Metadata to file option. It still spits out these sidecar files. It doesn't actually write this to the CR2 files.
Or does it? Perhaps I am not seeing it in Windows Explorer? Like IPTC vs. EXIF? I'm not sure Windows reads both. These are like different types or sections of metadata information about a file. So I just wonder what the benefit or consequence is of having this option enabled? Whatever it is, it is not very apparent. And as you can see from the screenshots above the capture time has not changed (not been saved) when you look at the file in Windows Explorer. Any changes are held in the XMP sidecar. Even thou I have enabled this EXIF option in Catalog Settings.
I want to add a watermark to a photo which encompasses a progress time or finish time of a sports event. For example, if an event starts at 7.00 am, photos taken at 8.05 am, in the watermark I want to display 1:05 hr (or 65 mins).
View 1 Replies View RelatedFor a website, my avatar must be less than 100px square and less than 30k of page weight. I'm having a terrible time doing this without the photo being a blurry mess once uploaded. The first two photos are relatively heavy because they've been edited, so I thought I'd try a photo that hasn't been messed with. I notice that even that photo, at 72ppi and 100px is still over 100k in weight. It will probably also be a mess
View 10 Replies View RelatedI have a .bmp file that is 20mb that I want to size down for ease of use with SketchUp.
The file is 3223x2200 pix
96 pix/inch
How would I do this without the image distorting radically?
I have only tried to resize the image by changing the width/height.
I have taken a photograph with land in the foreground and sea in the middle and far ground.
I was shooting into the sun and sea has too many highlights on it.
What is the best way of reducing the intensity of these highlights.