I use action macro to reduce 8x10s @ 300 dpi to 72 in a subfolder sent to clients by web for them to evaluate and choose preferred images. However, they get 2x3 images at the original dpi, so what they see on their monitor is too small to see differences. If uploaded to facebook etc. images look muddy. What am I doing wrong? Large files typically exceed Yahoo max. What can I do right?
View 16 RepliesI would like to know if it is possible to change the pathfile of the FEA results when the part file is saved into Vault. Â For example: the part file will be saved in the folder manufactruing, but I would like the FEA results to be saved into the folder miscellaneous.
View 3 Replies View RelatedWith same PSD file, I hid the layer visibilites and saved another copy, and I noticed that the file size was reduced dramatically.
View 20 Replies View RelatedI am finding that when I group a bunch of items together and then grab a corner handle and reduce the size of them that the shapes become distorted.
Â
Normal image:
Reduced image:
When a raw file badge shows that the file has been changed, I use Metadata Save to File & for the large majority of my images, the badge goes away and Metadata Status Changed does not show the file. For some of my files, however, the Save to File command doesn't work properly. If I am only displaying files with changes, the file briefly disappears, then returns. Even if I go to Windows Explorer and delete the xmp file, then again Save metadata to file, it pops up again with the badge saying it needs to be saved. I'm using Lightroom 4.3 64 bit on Windows 7.
View 12 Replies View RelatedSearch results in LIGHTROOM exported as text file.
Â
I want to seach LIGHTROOM and then get a text file of the results of a search. I find noting on this.
I've been working on a certificate and i saved it without looking at the file type. For some reason it set the file type to (.5). What is that? Is there any way I can open it again in CS5? Is there a file converter I could use. I just need to basically open the file agian in CS5 so I can continue to edit the certificate. I have tried opening the file with CS5 and CS6 and I get this message:
Â
"Could not complete your request because it is not the right kind of document."
I created a file in Photoshop and was saving it along the way as a layered PSD file. When I went to open it a few days later, it wouldn't open and said that it was an '8 file'. What happened, and how do I fix it? It had all the design layers I needed for another project.
View 3 Replies View Relatedexport search results as text or tab delimited file is this possible.
View 1 Replies View RelatedI'm trying to export meta-data for a 5 years old MRW file in LR 4 Win x64 residing there since LR 2, but it results in "Could not write metadata. Unknown file I/O error. (1)" error. I have checked the file permissions and it seem to be fine. What else shoudl I check for?
View 1 Replies View RelatedIs there a way to paste the results of a mass properties query to the drawing rather than to a file?
I have a complex shape that I am analyzing and would like the properties as part of the drawing for refence purposes.
When I send a file to Ps from Lr, edit that file then save it, Lr puts that file at the end of the line instead of next to the file I was working on. When you have 600 photos in a down loud, it is a pain to scroll through the photo's to find your place again.Â
Is there a setting to force the saved file back in line next to the file that was edited in Ps?
I'm running Windows Vista 64. I create a project in Photoshop CS. I save it. The file is stored in this path: C/Program Files x86/Adobe/Photoshop CS. If Photoshop is running and I click on Open, then navigate to this location the file appears and will open. However, if I try to navigate to the file by starting with My Computer and going to the exact same location as specified above the file does not appear. I've tried searching for it via Search, going through my entire computer and got nothing. And worse, sometimes I will Save a file in Photoshop and then go back to it a few days later and it is not there. I think the problem is where Photoshop actually saves the file. My 1st scratch disk is set to Startup. What does this mean? Is this dictating where Photoshop is saving the actual file?
View 10 Replies View RelatedI want to set one of my pictures as a icon of "my conputer", so how to do this?I didn't find that PS can convert jpg to ico,
View 3 Replies View RelatedRun TIME command and then take the resulting text and save it to a file.
Ideally, the text file should be named based on the drawing name. I know there's ways to write text to a file but I haven't had any luck taking the output of a command and exporting it.
Modifying the "file info" for a gif file (in my case, "General" tab, "Document Title" and "Description") doesn't actually get saved with the file - or, at least, if it is saved, it's not visible when re-opening the file.
Â
I believe that I understood that metadata for .png format isn't supported, but I thought that .gif was. (Test case is easy: open .gif file, add a Title and Description, save, and re-open - information is gone).
I worked for quite some time on a design in Photoshop CS, and I saved the file as: "End Of The World 1.0.psp"...
Now it says that it's an unknown file and I can't open it (because I wasn't thinking and put the "1.0" in the name). Is there ANY way that I can open this file in Photoshop? I really don't want to do the whole thing over again.
I don`t save my files after I`ve finished working with them . I named my project 15.05.08 and I didn`t check if everything was OK . A few minutes later I wanted to open it but to my big surprise there were no Photoshop file . There was only a thing that says it`s type is file but I can`t open it in Photoshop . When I try to open it it says " Couldn`t complete your request because it is not the right kind of document .
Is it possible to open it somehow?
I saved a picture on photoshop, turned off my computer, and when I turned it back on, I found that my picture was no longer a '.PSD' file but just a file that cannot be opened by my Adobe Photoshop CS3 Extended. Is there any way I can change the file back to a PSD or just a regular JPEG?
View 6 Replies View Relatedon the right hand side, the layer menu shows all of the diffrerent effects you have done to each layer? Then when you flatten it or try to run filters and then save, it completely edits it and smashes everything together. So how can I go back on old graphics that I like that have already been flattened and saved and find out exactly what effects & filters were used?
View 1 Replies View RelatedI've always in the past brought a logo file that a graphic designer provided into Illustrator and then exported a psd so that I could bring it into Photoshop on layers and get the exact size, etc that I've wanted and since Illustrator CC I've not been able to do this with any .ai files that I've been given. It always gives me this message after I've gone through the process: "Photoshop file could not be saved" no matter what the settings are. This means I have to use the eps file that was provided which is not nearly large enough and when I try and resize it ... what a mess
View 2 Replies View RelatedI was working on Photoshop CS6 beta on Lion OSX since one month with no problem.
Yesterday seemed to be the last day of use (1st june annonced however) and Photoshop CS6 Beta shutted down since I was working on it.
On the re-opening it asks for a licence key so I try to buy one month rental on the e-shop but the 3 bank cards tested failed. So I gave a call to the commercial service and they told me that they do not take in charge rental but only full licence and that I can download the trial for one more month if I want to.
Â
So, I will replace the beta by the trial.
Â
But :
- How can I keep my Auto-saved Recovered file I was working on when crashing (pretty important work)
- Where the recovered file is saved on the hard-drive ? And, can I make it works whith CS6 non-beta ?
I saved a file as PSD ,then delete all the layers and was doing another stuff on the sheet( the reason I did this is because I wanted the same page size and was lazy to enter the size:| )after I finished, I saved the file to another name. but, I found that the first file that i saved manually , is replaced by an autosave file on my work procedure on the second file. I know this happend because I was working with the sama names, but is there any way that I can restore my first file that I saved to what I manually saved?
View 3 Replies View RelatedI accidentally saved my PS file with merged layers, then quit. I can't believe I did that! Is there any way to reverse it?
View 2 Replies View RelatedI am building a page for a web site. when i have created a button, with a rollover effect and then save it, i have trouble recovering the button. the button is saved with all different files containing the different slices. how do i go to the saved file and get it back to the original button that i created.
View 1 Replies View RelatedI've edited, flattened all layers and saved it as jpeg in PS. Is there anyway I could restore the image to the original image?
View 4 Replies View RelatedPS auto updater pop-up. It asked me to update and install something about patch? I don't know what is was then I click "no" or "remind me later". After that everything stopped working. After I restart, everything works fine but PS.
I can open new file and save it. But when I try to open the "saved" one, the "open file" window came and gone so fast. Then the PS 's not responding. I have to close it through task manager.
I removed it and re-install it,
Shooting with a Nikon D70 in Raw mode - tweak in raw - looks good - open in PS CS2 - still looks good then save for web and the colors wash out dramatically(unacceptable). What gives?
if I can on account of the file being raw and the jpeg looking like yuck.
If I create an image in PS and save it to a JPG or PNG, it will not have that file be the current open file. I flatten the image and click to Save As, but when it saves, the image still has Untitled as the name in the program bar. What's the deal?? Granted, I haven't been using PS-CS3 for long, but in the previous versions, if an image is flattened and saved as a JPG, GIF, PNG, etc, it will then have that file open instead of the original PSD file.
View 2 Replies View Relatedif there's a way for my PSD file, which I created and saved in Elements, to be opened in CS2?
View 2 Replies View Relatedi've just been using the brush tool to draw and paint around with, and today when I tried to open up a saved project from last night, It came up all blurry and very undetailed compared to when i saved it. I think it might be the saved file was 16 bit, and maybe it's opening it up in 8 bit which is making it blurry? Or maybe my computer can't handle the 16bit and my resolution on the saved file was too high?
Also, I was wondering some recommended starting specs (like when I open a new window)