Photoshop :: How / Where To Keep Auto-Saved Recovered File
May 28, 2012
I was working on Photoshop CS6 beta on Lion OSX since one month with no problem.
Yesterday seemed to be the last day of use (1st june annonced however) and Photoshop CS6 Beta shutted down since I was working on it.
On the re-opening it asks for a licence key so I try to buy one month rental on the e-shop but the 3 bank cards tested failed. So I gave a call to the commercial service and they told me that they do not take in charge rental but only full licence and that I can download the trial for one more month if I want to.
Â
So, I will replace the beta by the trial.
Â
But :
- How can I keep my Auto-saved Recovered file I was working on when crashing (pretty important work)
- Where the recovered file is saved on the hard-drive ? And, can I make it works whith CS6 non-beta ?
View 9 Replies
ADVERTISEMENT
Dec 13, 2013
while working suddenly everything disappears from the monitor freezing and the file can not' be saved or recovered. The message that appears is insufficient memory. It 'a problem that often appears when I use the text or any changes to the text.
Coreldraw is a 32 Bit Windows xp professional and my pc has 3 GB RAM Intel Core Duo CPU E7400 I can't resolve this problem until now.
View 11 Replies
View Related
Aug 27, 2013
I had been working on an edit for way too long and of course i didnt save it the entire time because im terrible i guess, I wanted to see what the deal with Lens Flare was so i went Filter>Render>Lens Flare to check it out. I hated it and immediately removed the flare with no problems.
Then I was going to go back to Lens Flare to see if i could adjust it into something sort of decent but i accidentally went Filter>Render>Lighting Effects and it locked my Photoshop up (yes my computer sucks). I then started to panic because of the extensive amount of time i put into this edit without saving it.
I opened Photoshop and it loaded up the recovered file i was working on. Unfortunately it has the terrible lens flare from my first attempt attached to it and im not able to undo or anything. Is there anything i can do to get rid of the lens flare?
View 1 Replies
View Related
Mar 12, 2013
When a raw file badge shows that the file has been changed, I use Metadata Save to File & for the large majority of my images, the badge goes away and Metadata Status Changed does not show the file. For some of my files, however, the Save to File command doesn't work properly. If I am only displaying files with changes, the file briefly disappears, then returns. Even if I go to Windows Explorer and delete the xmp file, then again Save metadata to file, it pops up again with the badge saying it needs to be saved. I'm using Lightroom 4.3 64 bit on Windows 7.
View 12 Replies
View Related
Jan 8, 2013
I've been working on a certificate and i saved it without looking at the file type. For some reason it set the file type to (.5). What is that? Is there any way I can open it again in CS5? Is there a file converter I could use. I just need to basically open the file agian in CS5 so I can continue to edit the certificate. I have tried opening the file with CS5 and CS6 and I get this message:
Â
"Could not complete your request because it is not the right kind of document."
View 8 Replies
View Related
Nov 19, 2012
I created a file in Photoshop and was saving it along the way as a layered PSD file. When I went to open it a few days later, it wouldn't open and said that it was an '8 file'. What happened, and how do I fix it? It had all the design layers I needed for another project.
View 3 Replies
View Related
Jul 27, 2005
I recovered a lot of accidentally-deleted JPEG's (and some TIF's) using the Ontrack EasyRecovery program. Now, in Windows Explorer, the file type is correctly identified and the file size also seems to be correct. When I try to open the file with WIndows and Fax View, I get a "No preview available" message. In CS2, it gives a "Could not complete your request because an unknown or invalid JPEG marker is found".
View 9 Replies
View Related
Apr 9, 2008
I had a problem with a flash drive and used a data doctor program to recover the files. It worked well on all but my psd files (and a few jpgs).
I can see the thumbnails but can't open up the files. I get an error message about not having the right version of photoshop or it not being a photoshop file.
I tried Toby's psd recovery.
View 3 Replies
View Related
May 18, 2009
I have photoshop cs4 and I cannot find the Auto smart fix, auto levels, and auto contrast nor the adjustment for each that I had with photoshop elements.
View 10 Replies
View Related
Jan 23, 2013
When I send a file to Ps from Lr, edit that file then save it, Lr puts that file at the end of the line instead of next to the file I was working on. When you have 600 photos in a down loud, it is a pain to scroll through the photo's to find your place again.Â
Is there a setting to force the saved file back in line next to the file that was edited in Ps?
View 3 Replies
View Related
Jul 31, 2009
I'm running Windows Vista 64. I create a project in Photoshop CS. I save it. The file is stored in this path: C/Program Files x86/Adobe/Photoshop CS. If Photoshop is running and I click on Open, then navigate to this location the file appears and will open. However, if I try to navigate to the file by starting with My Computer and going to the exact same location as specified above the file does not appear. I've tried searching for it via Search, going through my entire computer and got nothing. And worse, sometimes I will Save a file in Photoshop and then go back to it a few days later and it is not there. I think the problem is where Photoshop actually saves the file. My 1st scratch disk is set to Startup. What does this mean? Is this dictating where Photoshop is saving the actual file?
View 10 Replies
View Related
Aug 3, 2004
I want to set one of my pictures as a icon of "my conputer", so how to do this?I didn't find that PS can convert jpg to ico,
View 3 Replies
View Related
Nov 16, 2013
I recently upgraded my laptop to Windows 8.1 and now from time to time, I am receiving the error above on the right side of the screen and my photoshop files won't open. Instead it just freezes and becomes unresponsive so I have to close Photoshop from going to 'End Task'. I am using CS6.
View 5 Replies
View Related
Jul 11, 2006
i have been able to recover most lost data and images, jpegs etc using a recovery program...
BUT for some reason not all my photoshop images/files will load, others try to load but i get this error message come up "could not complete your request because the file is not compatible with this version of photoshop"
View 1 Replies
View Related
May 11, 2012
Modifying the "file info" for a gif file (in my case, "General" tab, "Document Title" and "Description") doesn't actually get saved with the file - or, at least, if it is saved, it's not visible when re-opening the file.
Â
I believe that I understood that metadata for .png format isn't supported, but I thought that .gif was. (Test case is easy: open .gif file, add a Title and Description, save, and re-open - information is gone).
View 8 Replies
View Related
Apr 15, 2006
I worked for quite some time on a design in Photoshop CS, and I saved the file as: "End Of The World 1.0.psp"...
Now it says that it's an unknown file and I can't open it (because I wasn't thinking and put the "1.0" in the name). Is there ANY way that I can open this file in Photoshop? I really don't want to do the whole thing over again.
View 9 Replies
View Related
May 12, 2008
I don`t save my files after I`ve finished working with them . I named my project 15.05.08 and I didn`t check if everything was OK . A few minutes later I wanted to open it but to my big surprise there were no Photoshop file . There was only a thing that says it`s type is file but I can`t open it in Photoshop . When I try to open it it says " Couldn`t complete your request because it is not the right kind of document .
Is it possible to open it somehow?
View 8 Replies
View Related
May 3, 2008
I saved a picture on photoshop, turned off my computer, and when I turned it back on, I found that my picture was no longer a '.PSD' file but just a file that cannot be opened by my Adobe Photoshop CS3 Extended. Is there any way I can change the file back to a PSD or just a regular JPEG?
View 6 Replies
View Related
Jun 18, 2009
on the right hand side, the layer menu shows all of the diffrerent effects you have done to each layer? Then when you flatten it or try to run filters and then save, it completely edits it and smashes everything together. So how can I go back on old graphics that I like that have already been flattened and saved and find out exactly what effects & filters were used?
View 1 Replies
View Related
Sep 24, 2013
I've always in the past brought a logo file that a graphic designer provided into Illustrator and then exported a psd so that I could bring it into Photoshop on layers and get the exact size, etc that I've wanted and since Illustrator CC I've not been able to do this with any .ai files that I've been given. It always gives me this message after I've gone through the process: "Photoshop file could not be saved" no matter what the settings are. This means I have to use the eps file that was provided which is not nearly large enough and when I try and resize it ... what a mess
View 2 Replies
View Related
Aug 14, 2013
I just installed PS-CC and LR5 on a new computer after a catastrophic failure on the old one, which was running PS-CS6 and LR4. Is there a way to recover my custom settings and presets from a full backup of the old computer and apply them to the new applications on the replacement computer? I have full backups, but no export data for any of the settings or presets. And because the old computer is dead, I can't just run an export.
View 7 Replies
View Related
Aug 13, 2012
i recovered .nef raw image files from a dead external drive. i now can not open them in any program. the message i get in CS6 is 'could not complete your request because the file-format module cannot parse the file.'Â
Â
originally the extension was .NEF now it is .nef- i dont know if that makes a difference, but i hope the file is somewhat corrupted but still fixable.
Â
usually the .NEF file has a .xmp sidecar file with it. these ended up separated from the original .NEF when the files were corrupted, and i cant match them up.
View 6 Replies
View Related
Nov 17, 2012
I use action macro to reduce 8x10s @ 300 dpi to 72 in a subfolder sent to clients by web for them to evaluate and choose preferred images. However, they get 2x3 images at the original dpi, so what they see on their monitor is too small to see differences. If uploaded to facebook etc. images look muddy. What am I doing wrong? Large files typically exceed Yahoo max. What can I do right?
View 16 Replies
View Related
Dec 30, 2012
I saved a file as PSD ,then delete all the layers and was doing another stuff on the sheet( the reason I did this is because I wanted the same page size and was lazy to enter the size:| )after I finished, I saved the file to another name. but, I found that the first file that i saved manually , is replaced by an autosave file on my work procedure on the second file. I know this happend because I was working with the sama names, but is there any way that I can restore my first file that I saved to what I manually saved?
View 3 Replies
View Related
Oct 20, 2012
I accidentally saved my PS file with merged layers, then quit. I can't believe I did that! Is there any way to reverse it?
View 2 Replies
View Related
Nov 7, 2002
I am building a page for a web site. when i have created a button, with a rollover effect and then save it, i have trouble recovering the button. the button is saved with all different files containing the different slices. how do i go to the saved file and get it back to the original button that i created.
View 1 Replies
View Related
Sep 3, 2007
I've edited, flattened all layers and saved it as jpeg in PS. Is there anyway I could restore the image to the original image?
View 4 Replies
View Related
Apr 3, 2008
PS auto updater pop-up. It asked me to update and install something about patch? I don't know what is was then I click "no" or "remind me later". After that everything stopped working. After I restart, everything works fine but PS.
I can open new file and save it. But when I try to open the "saved" one, the "open file" window came and gone so fast. Then the PS 's not responding. I have to close it through task manager.
I removed it and re-install it,
View 3 Replies
View Related
Sep 2, 2005
Shooting with a Nikon D70 in Raw mode - tweak in raw - looks good - open in PS CS2 - still looks good then save for web and the colors wash out dramatically(unacceptable). What gives?
if I can on account of the file being raw and the jpeg looking like yuck.
View 2 Replies
View Related
Sep 10, 2008
If I create an image in PS and save it to a JPG or PNG, it will not have that file be the current open file. I flatten the image and click to Save As, but when it saves, the image still has Untitled as the name in the program bar. What's the deal?? Granted, I haven't been using PS-CS3 for long, but in the previous versions, if an image is flattened and saved as a JPG, GIF, PNG, etc, it will then have that file open instead of the original PSD file.
View 2 Replies
View Related
Aug 18, 2008
if there's a way for my PSD file, which I created and saved in Elements, to be opened in CS2?
View 2 Replies
View Related
