I have a map, a section of which is highlighted as members of a specific group. To make this area stand out more I wanted to raise it from the rest in a 3D way and the part that was rised could be slightly translucent to still allow visability of the remaining area. How could I go about this? I do not have any experience with 3D in photoshop.
View 9 RepliesI have an image which is currently set at 72 DPI (aka resolution). Anyways, if I were to raise the DPI to 600, should it blur? If it does, is there a way around this? Would my only option be to re-make the image?
View 8 Replies View RelatedI'm drawing existing SD pipes and trying to put in rim and inverts of the existing structures. Sometimes it won't let me raise an invert to where it really is. It only let's me raise it so far. It may be a rule but it doesn't seem to be a rule I can change.
View 4 Replies View RelatedI am trying to adjust (raise) a very intensive topographic survey from NGVD 1929 to NAVD 1988.I know how to raise the surface and I know how to adjust the datum of the points.
How to raise all the breaklines used to develop the surface as well? This would include survey figures, feature lines and 3d polylines.I want to raise them all by an equal amount.
I am trying to verify the bending strength of a solid part. Need to calculate the section modulus on certain cross section. Don't know how to do it using inventor.
View 7 Replies View RelatedI'm looking to basically do what this video shows:
[URL]........
I just want to create a section from the point cloud, but the point cloud won't allow me to select it as an object in the 'Generate 2D/3D section' dialogue as it's not a solid/surface.
On an unrelated note, I find snapping to the point cloud impossible - is there an option in OSNAP that I'm missing? I've tried this with attached PCGs and RCP point clouds, no difference.
I have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.
View 2 Replies View RelatedC3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
The section view behaves strangely with the ‘section participation: none’ components
Invertor2012 sp2
Win7 x64
why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies View RelatedIn my section editor my labels show up correctly and in all the locations I want. But then, in my cross section file, I look in my section views and they are completely different. When I try to label more points under the Code Set Styles, they won't even show up on my section views.
View 6 Replies View RelatedI think I just haven't done this in a while and can't find the right setting.
I have existing sections.
I have section views.
I created a corridor.
How do I add the corridor section to my existing cross-section in the section views?
I can view them in the corridor section editor. But I should also be able to add the corridor section to my section views, right?
To plot them, do I NEED to do this through Sheets Sets? I don't have experience with sheet sets yet.
I don't use Civil 3D often enough anymore. Still learning much about the new interface and pulling a design together.
I've got a corridor where the section editor does not show a section that the corridor has created. My frequency is set to 25' with high/low points along curves. At station 22+75, in the model space the corridor shows a section being created (image #2). However, I cannot edit or even see that section in the section editor (image #1). The first screen shot shows the list of stations for the corridor in the editor while the second screenshot shows the model space at the problem station. This is in the middle of a region, so there shouldn't be any issues with other assemblies or regions.
In the section editor, Sta 22+74.91 is listed, skips 22+75, then lists 23+00. I am needing to manually adjust the cross slopes of my lanes. If I view the surface there is a weird dip because at station 22+75 the default slope of my lane is -2%. I cannot edit station 22+75, so I cannot adjust the cross slope of the lanes.
What is causing the section editor to not even recognize a section? How can I edit the cross slope at station 22+75 if the editor doesn't even display that section?
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies View RelatedI need to divide a bridge deck section (sort of trapezoidal shape with circular hollow section inside) but I need to keep the centroid level of each section to be at the same height. is there any simple way of doing it using Autocad 2014?
View 0 Replies View RelatedIn the drawing view below, I want to section the green assembly only within the red section. I've tried this with a breakout and it doesn't work. There doesn't seem to be a way to exclude the green from the section and yet include it in the breakout.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
How can I revolve the top section to blend into the bottom section.
View 2 Replies View RelatedSo, I we were taught autocad at hour school but not autocad architecture because apparently autocad architecture is too "advanced" for us. so now I need to draw window details (thermally broken aluminum frame window with insulating glass unit) but it is so much work in autocad however I was told that I can just draw a window in autocad architecture and just cut a section and just make a few adjustments to get the window detail.
View 6 Replies View RelatedI am having an issue when producing a section view with my corridor. I have a corridor and corridor surface, as well as an existing ground surface. I create a sample line group and sample EG, Corridor Surface, and Material. When I produce a section view I get 4 sections in the view: EG, Corridor Surface(with the corridor surface naming convention), and an additional section simply called "Corridor Surface".
This last section is strange in that it seems to be using the correct assembly, but not targeting the correct features. Also it has grips at all of the vertices which I havent seen before.
And the strangest part, when I click on properties for this section and go to section data, the columns for Description and Data Source are blank.
If there is no data source, then where is this section coming from, and why is it showing up when I did not specify that it be created. This is a real mind boggler to me and makes no sense. Screenshot attached.
My future ground somehow disappeared out of one section view in my group. Under the section tabs I still have my existing ground and pipenetwork but the future ground isn't there. It remains in the other section views. How do I add it back?
View 1 Replies View RelatedI am using AutoCAD 2013
My solid model is imported from IGES file format. I'd like to make a plane at specified location (perpendicular from the surface), and I'd like to have a cross sectional geometry cut by that plane. (attached pic.)
1. How can I make a plane following perpendicular line from the surface?
2. How can I export the cross sectional geometry?
When I change a section to static mode, I would like to add new section points or erase section points.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I am inquiring about some photo editing (web design). I have a banner on my web build with multiple pictures with a transition between each photo. Now each photo is lets say 1200 x 320 pixels. Isn't there a way to take a large photo, say from my digital camera (Nikon D3100) and have a 1200 x 320 pixel box I can move around over my large picture and then make a selection (via mouse click or enter) so I can use the picture in that specific banner.
I thought I watched someone show me that at one point, and they did it so flawlessly. What I am really looking for is the simplest way to take a section out of a large picture and have it be a certain pixel height and width.... by the easiest means possible without loosing any quality.
how to get rid of an unwanted area I am trying to trace around a floor plan of a house and do not want anything else but the plan.
View 1 Replies View RelatedFirstly, I'm new to this forum and really look forward to learning and participating. I've been working with PS for about two years.
I've been unable to get this cropped shoulder smooth against the black ground; that's the model's hair in the upper right corner falling onto her collarbone. (I can't show the entire photo as it includes partial nudity). I selected it from a busy bright background with extraction. I figured I'd be able to sharpen it at the end, but that didn't work precisely. I've tried Unsharp Masking in Channels, heal & stamp tools, even using a black pencil, but this is still my best result.
In the background of this image is a street sign. I need to see what that street sign says but it is too blurry for me to read. Is there anyway that photoshop could fix this?? I know next to nothing about photoshop
View 12 Replies View RelatedI have two similar images of a group of people. I need to cut and paste two of the heads onto to the other image because their expressions are better.
Unfortunately, I seem to have stepped forward a little when taking the photograph, so consequently the proportions are a bit out when I cut and paste.
it can be done in ps.
You know when in a newspaper you get a star with a suspicious white ring round there nose, or a ingagment ring missing they have the image then a section coming off of it and enlarged.
I'm trying to magnify a circular section of an image to show increased detail while keeping the rest of the image in regular magnification. There must be some way to do this, and I'm not talking about the zoom tool.
View 1 Replies View Related