Photoshop :: Picture Resolution Enhancement
Nov 20, 2012Need to know if there is software available which can increase the pixels for photos already loaded onto the iMac and deleted from the camera.
View 7 RepliesNeed to know if there is software available which can increase the pixels for photos already loaded onto the iMac and deleted from the camera.
View 7 RepliesPhotoshop 9.0.2
I took a Word 2003 graphical single-color (black) letterhead and copy/pasted into PS. I can see the grid lines in PS so that's cool. Now, what I want to do is to highlight (via MagicWand, I think) the outer perimeter of the logo and enhance its pixelation (is that a word?) so I can use it in an email (HTML type) as well as change its size (+/-) without altering its resolution. There are alot of lines, circles, curves etc. that appear to be (are?) connected and interconnected - except for about 6 stars and planets. [Logo is based on stars, planets, earth, moon, sun etc. - like an astronomy or solar system approach to make it pretty simple.]
So, when I've selected the MagicWand icon on the Toolbox and then select the black outer border of the logo, it appears that PS enables all of the logo - at least the connected parts - the others I'm not too sure as I can't see them 'vibrate' as I currently look at the MagicWand enabled logo. There's also some text involved - slanting up to the right and down to the right. All text is English.
how do I increase the pixel resolution of the ENTIRE logo (all stars, planets etc. even those not interconnected) and make sure that I can use the *.psd file to change the logo size but not the resolution? Or do I need to change the file to *.?.
I reduced the size of a couple of pictures in Photoshop, but the dpi also reduced based on the size. I have saved the picture with this resolution. Now the problem is that when i am trying to get this printed, the website asks that the picture be atleast 300dpi to get quality pictures. I cannot not reduce the size of the images, as these pictures need to be embedded in a word file.
My question is - if i increase the dpi for the existing saved pictures will it help or should i go about reducing the size of the original picture and also maintain the dpi right from scratch.
How to increase the resolution of the picture.
View 4 Replies View Relatedimprove this picture resolution? Is it possible?
View 2 Replies View RelatedI have a 7.2 MP digital camera. When I upload the images to Photoshop, they show up as 72 pixels/inch by default. How can I have them at 300 pixels/inch? I bought the camera, so I could start doing posters.
View 9 Replies View RelatedI'm trying to print the presidential medal of freedom in high-res but all the samples I found on Google image search and on wiki are low-res. Since I need it for print, I increased it to 300dpi and it looks really jagged and blurred. I tried to search for a vector version, but couldn't find it. This is how it looks:
I tried all the filters as well, but couldn't find one that suits me (cutout is the closest, but it still looks horrible). I'm using Photoshop CS5.
Except finding an original high-res (which is impossible right now), in which other creative way can I fix it?
can anybody help with a suggestion for making a picture taken with a digital camera at 72dpi and changing it to 200 or 300dpi? I am trying to incorporate this photo in a logo that will be used for print.
View 7 Replies View RelatedI tried to use a scanned picture in photoshop and is said the file was too large I scanned the photo at 4800 dpi. Thats too large. What the highest resolution is, that can be used in Photoshop?
View 5 Replies View Relatedwhat image size & resolution do I use for slideshows?
View 2 Replies View Relatedwhat is the highest resolution I can use in photoshop from a scanned picture
View 2 Replies View RelatedI occasionally use the option when saving an edited picture to just overwrite the original. I would have thought that this option might go further by having the program default of making the saved copy the the same size as the original or if its dimensions had altered save at the same resolution& degree of compression.
View 1 Replies View RelatedHow to enhance the picture resolution and color the picture in Gold.
Dwarfs_Stone_and_Steel.bmp
How do I make picture like this pie on the top of this page and muffin on the bottom for example: (I cannot post links, so here it is: (www proverstka ru)
It looks like drawn thing, but I thing it was made from photo. How do I achieve smooth and nice looking picture like this from an existing picture?
What type of effects I need to apply?
Well I have been a avid PS7 user for a long time now, mainly to do touch ups and compositions for my 3D work etc but ,ately I have been trying my hand at photo restoration and image enhacement.
I have a problem. I am trying to enhance a photo that has a reflection in it so as to try and make out the detail in the reflection.
I have a digital photography business and just starting out.
I have seen some photography sites that do some photoshop "eyes enhancement" to make photographs...pop.....and I am wondering how they do it and what methods they use.
They seem to make the childrens eyes iris' look crystal clear and enhance them.
click on the "inquires" link. See the picture of the kid? No way his eyes are really like this. She must photoshop a bunch of her pictures to make them pop.
I have a question that relates to a digital image that is of an old original B/W photograph.
The image is of an old, plain page of a book found by Police some 65 years ago, in it's orginal form the police had noticed what appeared to be indentations or very feint writing on this page and used graphite powder to highlight their findings and then went over the highlighted areas with what appears to be an early felt tip pen. This was then photographed and an image produced.
The intial image itself is quite small about 400 X 400 px.
It shows 5 lines of hand written characters with additional hand drawn lines.
Here is an example of a close up of the 'sharp end' of the two crossed lines in the centre of the page:
Here is that image reversed:
When I examined the image in more detail I noticed that the actual characters and lines were not simply black markings but in fact had various shades ranging from grey through to black within them.
I turned the image negative and it showed up what appeared to be smaller letters and numbers behind the initial blackened markings and lines. I have done some basic filtering and have managed to improve on the appearance but only a little.
The questions I have are these:
1. Are these real markings or are they some kind of digital noise? Most of the letters and lines on this page show signs of letters and words beneath the drawn over markings. (I have done a lot of research about micrography and such miniature writing does and did exist at the time and in fact has been around for 4000 years or more)
2. Is it possible for me to 'strip away' further layers of lighter coloured pixels to sharpen the markings that appear to lie beneath the overdrawn characters and lines?
3. This being so, what steps or processes can be used to achieve better clarity and hopefully a larger image.
I hope I got that right and it makes at least some sort of sense
Is there a way to change the resolution of a picture without it changing the size.
I cannot find a way to separate the two..
I have a grayscale photo taken in fron to a window producing a bad bounce flash. How do I fill in the spot using a portion of the outside image?
View 1 Replies View RelatedAm looking for batch resize enhancement. I did Select All and then did Re-size, but only got re-size on the current picture. Actually, I don't think SelectAll did anything. Wonder what its there for, actually.
Adding other utilities (paid or free) to get the re-size job done is not a valid workaround. The point is to use a utility that does it all. For actions that I do not do frequently, I can never remember which tool does which thing best. It would be preferable to have one go-to tool that meets basic editing and file needs and is easy to use. I am thinking paint.net may be mostly for advanced editing.
I ended up using MS Picture Manager for this task, but in folders that need selective selections (e.g. select all pics > 2Kmb), they don't support n-to-n-selection with ctrl-shift.I had to use Explorer to copy the desired folders to a temp folder then use MS-PM to Select-All and Batch Resize; then copy back. blech. There once was a uploader tool from a website photo hosting site I had used in the past that did batch resize, but couldn't remember which or where it was.
I used %percentage reductions, maintaining aspect ratio. I can see that h x w absolute measurements might be tricky in batch mode.
i was curious as to which sharpening/color correction techniques this photographer used to result in such a perfect photo. more specifically, i'd love to learn how he managed to make the blue halter strap almost shimmer and pop out of the image and his face a beautiful, warm and rich coffee color.
i attempted to recreate his enhanced image with the original, but fell slightly short in a few areas. i did eventually manage to get a similar look by simply adjusting input levels and sharpness, but had the toughest time making his head and all the fine details on it really "pop" AND "glow".
i basically increased the black input levels a bit to saturate and bring life to the image, but that resulted in the face and halter also darkening.
before: [URL] .......
after: [URL] .....
I have a GIF image file (single colour on transparent) I would like to match to this PowerPoint text.
There is a slight embossing with a hint of highlight, plus the shadow effect.
I realize the nature of my question maybe asking the impossible, but I have a low res image I downloaded from the internet, placed in an InDesign page, blew it up and printed it out. I was going for the distressed look that it has, it looks ok when I print it out considering it's low res and I blew it up fairly large. However, it's a little too pixelated to look professional when printed. Are they any tricks or things I can do to make it look higher res for print. I've attached the image as well as a screenshot of the InDesign file so you can see it in context.
View 4 Replies View RelatedI am a Photoshop newbie and I have a series of graphics (all 72dpi from a website) that I would like to print in 300dpi. Is it possible to take a 72dpi .jpeg or .gif file and easily convert it to a higher resolution printable graphic? If Photoshop can't do it, is there any type of program that can?
View 1 Replies View Relatedi have some big .jpgs with low resolution say 10x10 inch at 72dpi.
is it possible for me to convert it to 2x2 inch at 300dpi?
I'm trying to create a high resolution version of a low resolution texture used in a game. I've found a pattern that I think is acceptable, from a real image.Now the question is this: how can I colorize the large image to that it is as resemblant as possible to the original one? I've tryed a simple colorize, but the result is not so good...
Original texture:
[URL]
The image to be colorized:
[URL]
I'm using PSE10 on a Win7 (64bit) OS. When I delete a picture (from catalogue and harddrive) the PSE-Organizer tends to jump down several pictures (Haven't been able to determine a fixed number), so I have to go up again and browse through the same pics a couple of times.
View 2 Replies View Relatedwhen i go into the editor and pull up a picture and blue background appears behind the picture and circle enters the screen. how do i get out of this?
View 1 Replies View RelatedI am using Photoshop Elements 10. How do I convert a picture to B&W and then erase part of the picture for the color?
View 4 Replies View RelatedAny one tell me how to turn a regular colored picture to a picture that looks like it has been drawn with a pencil.
View 1 Replies View RelatedI have several partially transparent GIFs.
I'm trying to layer them all on top of each other.
When I copy one partially transparent GIF and paste it on to the second partially transparent GIF the transparent section turns white and is no longer transparent.
Therefore covering up the contents of the prior GIF.
In short, please have a look at the three attached pictures, I would like to have all three on top of each other showing all buttons.