Lately I reset my Photoshop 5 preferences because some functions were completely mixed up.Now I have the problem that whenever I fill in a path made with the pentool, the content gets really pixelish around the edges.This is not the case though when I stroke a line made with the path.
View 2 RepliesI've been trying to calculate large areas using fills but I keep encountering a problem with some of the hatches not showing an area and thus ruining my calculation. I've found out that I can correct it by removing certain crossing point between lines as is shown below in my screenshots. Is there any reason this is causing a particular problem and can I avoid it to save me having to go back over my hatches checking for these malformed hatches?
area.jpg
altered.jpg
After selecting the area type tool, I try to click and drag but I get an error message: You must click on a non-compound, non-masking path to create text inside a path. This worked before but I must have screwed something up.
View 3 Replies View RelatedCan I use the paint brush twice on the same area without having different scales of the same color? I would like to keep the paint brush smooth but the problem is that when the same area is painted twice, the color in such area darkens.
Is it possible to lock the paint brush to one stroke of paint? If an area is painted, is it possible to automatically skip that area when painting? In other words, is it possible to have the brush effect only once over a given particular area even if it is brushed over twice?
how do you type in a specific area? i dragged my cursor and formed a square but when i type, it appears out of that square. i'm using ps cs6
View 2 Replies View RelatedCS3, Windows XP, 5.1.2600 Service Pack 2 Build 2600, System Model: E-4500S, System Type: X86-based PC x86 Family 15 Model 6 Stepping 4 GenuineIntel ~2799 Mhz
Regardless of the brush diameter or hardness when using the dodge tool to lighten an area of a photograph, it only lightens a very small area in the center of the brush and then only after repeated clicks. The burn tool seems to operate as normal (the whole area of the brush regardless of diameter).
Crop tool deletes area within the marquee!? Never did this before!
View 7 Replies View RelatedYou know that rectangle selection tool? Cool huh! It lets you select a rectangular area and then move it around the graphic, letting you re-arrange layers or selected areas...
Well, I'm looking for a way to use a similar rectangular select tool and then be able to point at the bottom right corner of the selected area and be able to resize the selected area proportionally. Is there such a tool in photoshop? And if not, is there another graphic program that has this capablity? All I want is this simple capability, I'm willing to use whatever program that has it... its too much trouble creating my own program to do it.
Remember I said resize proportionately, in comparison MS Paint has a similar selection tool and lets you resize what you selected but NOT proportionately. I hope you understand what I mean. Resize but keep same proportionate dimensions...
Thank you.
I have Adobe CS4 for macs. Just today, every time I enclose an area with my polygonal lasso tool, it stopped closing the area and instead gives me the message "No pixels are more than 50% selected.
The selected edges will not be visible." I must have accidentally pressed something by mistake that makes the lasso tool not work anymore but I don't know what. Do I need to reset Photoshop? Any ways to reset it? I tried holding option,command shift but it still did not reset my Photoshop to its original settings.I also rebooted my computer several times with no success.
I couldn't use the crop tool: when I want to crop any area, the big black-colored area occurs and preventing me to see what I want to crop... Before, with my Photoshop, I didn't have a such trouble, I attached a print-screen and it explains more accurate.
View 9 Replies View RelatedI am using PSC6 and the clone tool stamp will not paint from the sample area. After holding down the alt key to obtain sample it will not paint. I can hold the sample over the area to paint & see the cloned area visually, but it will not paint when I click. however if I click many multiple times I get a faded clone.
View 1 Replies View RelatedHow do I choose an area of my image and use it as the "color" for my Brush tool or another tool.
Example: I have some grass, and here I use the lasso tools to select a small area to subsequently be able to paint with it.
I use Photoshop to design interfaces and then cut down the graphics, by using the rectangular marquee tool and selecting the area that I want to save, copy-merged and then paste into a new document, of the correct canvas size according to the selection area, and then save for web..I end up with dozens of open windows all "Untitled" something, unsaved.
All I want is being able to select an area in my document using the marquee tool and then select from File a save function like "Save selection for web and devices...".
Perhapse this option could be in the "Save for web and devices.." dialog, where you could select from a dropdown the following:
"Entire document" (default)
"The entire selected area"
"Trimmed down selected area"
Is it possible to fill an area with content-aware using the paint bucket tool? i have been able to fill the exact area I would like to be replaced with a general swatch. perhaps it is possible to create a swatch which uses the content-aware filter?
View 5 Replies View RelatedI have used the marquee tool to select an area and moved it using the cursor keys. Now I want to drop it/commit it even when I hit enter I can't seem to get rid of the marquee flashing surround.
View 4 Replies View RelatedIn PSE11 the clone tool with the aligned option creates a duplicate of the whole image instead of just the brush area.
View 2 Replies View RelatedI don't use the area calculation tool that much. I was just working out a large area for concrete. I use TOOLS - INQUIRY - AREA. Thats all fine and it gives me the area, for instance, to keep it simple 4900 x 9000 = 44.10m² AutoCad displays it as 44100000. I know it's not a major problem, but is there anyway I can get it to display as 44.10 or at least lose all the zeros.
View 9 Replies View RelatedFound that in certain drawings, the measure area tool will just suddenly stop working? It's very odd. It let's me pick points, but won't let me press enter to see the total.
Closing and reopening AutoCAD doesn't work. It seems to be a permanent thing to the affected drawing.
It's happened to me in a few drawings, but only in those specific ones. Other drawings are fine. I'm guessing it's a setting I've changed somehow?
I've been getting round it by creating shapes using the polyline, and then looking at the area in the properties window. It's an ok solution, but not ideal.
I am trying to use the rectangle tool to select a rather specific area. I am trying to make a 50x50 square in the bottom left corner, but I don't know how I would accomplish this.
View 1 Replies View RelatedHow to close the selected area using the Path Tool? I expected, after clicking in the initial node the area would appear as selected, but no..
2.4.8
I don't remember it being a problem in LR4, but I have just used the spot tool on an image where there was a crop. The program's choice of source for the spot tool seems to me to be more dramatic than ever before, and in this particular image the source selected was in the area which I had cropped out. To move the source point, I had to open the crop tool to adjust one side of the crop, then move the source, then restore the crop to the image, then reselect the spot tool.
It might well be that in some instances the cropped out area is the best source, but whether it is or not, I think we need to be able to access the cropped detail without resetting the crop itself and preferably without having to then reselect the spot tool.
I've figured some things out, but am struggling with what appears to be a very valuable tool... the area tool.
I found many references to the boundary tool, but that looks more complicated.
I have figured out how to mark the corner and press enter, but the output is for example 1.7 sq ft vs. what should be approx 35K sq ft.
I tried to change the units, but that didn't seem to make a difference.
When using the LR5 spot removal tool I can perform cloning or healing and LR automatically selects the target used to clone from, but I cannot see where this area is on the image. A pin should appear with a line connecting the area to be removed and the target area used to clone from. I see no pin. Is this controled by a setting?
View 2 Replies View RelatedI created a panorama in PTGUI and imported it into LR5 as a tiff file. There is a small area in the upper right corner that is white as the image did not fit the rectangle exactly. I wanted to use the clone/heal tool to replicate a portion of sky to cover that area, but no matter what I do it will not put anything in that area - it just stays white. I was able to do this in version 4.x. What is going on?
View 4 Replies View RelatedCould not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. I have reset the tools restrted my computer.
View 1 Replies View RelatedI am working on a project where I am doing hand drawn rotoscope (think waking life). For larger areas I am drawing the outline and then filling the shape with the paint bucket. The problem is that the fill doesn't go all the way to the edge of the outline. The anti-aliasing on the brush seems to be creating it, but I don't want to turn anti-aliasing off. It will be a huge time saver for me to figure this out.
View 1 Replies View RelatedI use Photoshop 7.0, and yesterday I started having an issue with Color Fills.
(You may actually have to Say I have a black-and white lineart on the background layer, such as this.
I double-click on the background layer to make it edit-able.
I click on the Color Fill button, choose solid color, then pick any color (say we use bright red). I go back to the lineart, move the Color Fill layer to underneath the lineart layer, and fill the Color Fill with black. Normally, it would just create white, however for me it has pink/light red. The same thing also happens for patterns and gradients; it leaves a very faded version of the color on the picture.
I didn't change any options or settings, however my little brother was playing around with Photoshop, and he may have changed something. Can anyone tell me how to get it so that there is no pink or faded color there?
I'm trying to fill some technical drawings with the simple hatch/dot /chevron pattern fills that seem to be in most simple applications but photoshop only has textures , and i can't find any to download for mac osx .(Free , as this is a one-off job ). Either that or an application that has the fills and a magic wand.
View 5 Replies View RelatedGetting an issue whereby gradient fills have changed when you reopen a PSD. It's happening too often to me to be something i'm doing accidentally.
Sometimes i save my file and the gradient fill on a shape is be grey, reopen and it's then white. Fixing it and saving it again seems to then save it properly. I haven't been able to establish a pattern to reproducing it yet. Hence why i'm wondering if others have seen this too?
In Photoshop, I realized that the shape tool is divided into three prefered styles - Shape, Path, and Pixels. In Shape, I have the option to to change the stroke and fill but not alias it. In Pixels, I have the option to alias it but not change both the fill and stroke. If I create a shape as one style, I cannot convert it to another. Is there a way to change both the fill and stroke of an aliased shape?
View 4 Replies View RelatedWhen i make a new path with the pen tool and go to fill the stroke path it makes brush dot at all the anchor points? How can i fix this to go back to filling in the entire stroke path?
View 2 Replies View Related