Photoshop :: Opening Specific File Via Action
May 14, 2006
I am a professional photographer and wish to create an action where I can bring in my studio logo into an image file. Eventually I will run this as a batch.
Scenario:
Open image to have logo added
Opem logo image
Drag logo on to new layer of first image, and position
Close logo
Close and save original image
I have other stuff going on in this action (I'm creating a custom proof) but while recording the part where I want to bring in the logo it doesn't seem to be able to find the right logo file when I try to run it.
View 1 Replies
ADVERTISEMENT
Nov 14, 2013
I'd like to create an action that spot heals with a specific brush, with specific brush parameters and centered on a specific pixel - is this possible? I've got 16MP image files coming from a camera with a hot pixel, and I'd like to just run an action on import rather than heal it manually every time.
View 4 Replies
View Related
Aug 4, 2012
is it possible to create an action in the action palette which chooses a specific color I want , instead of doing it manually with the magic wand? For example something like "Set selection all blacks"?
View 2 Replies
View Related
Jun 7, 2012
I have images of varying sizes that I need to all be cropped to a specific aspect ratio in the center of the image and extending either to the side edges or the top and bottom depending on using the maximum portion of the image. How do you set up an action to do this.
If I were to do this by hand, I would use the rectangle marquee, change to fixed ratio, and drag from one edge to the other. They move the selection to the center (as best I could) . Then do Image<Crop?
But I need to automate this process and have have it exactly positioned in the center. Can this be automated in an action? If so, how?
FYI, I have CS5 (and CS6). I am comfortable using the image processor. So as long as I have an action set up, I can process all of my images using the image processor. I also have lightroom 4 if there is some way to do it there.
View 7 Replies
View Related
Oct 23, 2013
I'm trying to create an action to change two specific colors in ~300 different logo files (.ai and .eps). I'm coming from Photoshop so I assume there is a way to create a droplet from an Illustrator Action but that's a different topic.
The colors are Pantone 143 and 287 which need to be changed to 143 U and 287 U, respectively.
Here are the steps that I think I need to record for my action: Unlock all layersAdd new colors to swatch boardSelect all layersRecolor Artwork... (Edit -> Edit Colors -> Recolor Artwork... This step is not recorded?)Save file The problem is that the Recolor Artwork step is not recorded.
View 8 Replies
View Related
Feb 26, 2012
I recently upgraded from CS4 to CS5. I imported some of the actions I had created without problem.
I use one for sharpening with the following steps:
1. Convert to Lab Mode
2. Select Lightness Channel
3. Open Unsharp Mask Dialogue Box
4. Convert back to RGB Mode
The "Dialogue" box is correctly toggled to "on" in Step # 3
However when I execute the Action, the Dialogue Box for USM doesn't automatically pop up, as it did in CS4 - but if I click anywhere on the screen, it then does.
I tried recreating the same action in CS5, but it has the same problem - the Dialogue Box for USM doesn't open by itself, and only does so after I click anywhere on the screen.
This happens both on my Windows Vista Home Premium 64-bit Desktop, and a new Windows 7 Home Premium 64-bit Laptop.
[URL]...
View 10 Replies
View Related
Aug 8, 2008
I am currently using Adobe CS3 Design Premium with Windows XP Pro as the operating system. The computer is a self build and has 2GB of RAM, 450GB of onboard HD storage and 6x500GB of external HD storage.
As a photographer I frequently end up with anything between a 100 and 300 RAW images after a days work and convert them to DNG, Tif and JPEG files.
With CS2 I ran an action which opened the image in Camera RAW which then enabled me to make adjustments before opening the image in Photoshop and completing the other elements of the action. Since upgrading to CS3 I have been unable to create a similar action and having read the "knowledge based" information and looked through the topics in the forum have failed to find anything that is of help. As each image and the conditions under which it has been taken differ it is quite important to make corrections in Camera RAW before completing the action in Photoshop and fixed settings applied by Camera RAW would be inappropriate.
It is always possible that I am making a fundamental error in writing the action but given my previous experience it seems unlikely. Incidentally I usually bring up the images in Bridge and then select the best images to process and start the action from Bridge.
View 3 Replies
View Related
Feb 22, 2013
Right now my program opens to the "manage" screen. I changed it way back when, due to freezing issues. It's freezing more and more now and just recently started showing a HUGE preview screen on the right. Not sure what I did to cause this but I'd like to change it back to opening to the Edit screen.
View 2 Replies
View Related
Dec 7, 2011
I've had a simple lisp I've been using for years that suddenly disappeared. It required that you identify a block name, tag name, and the value that you want the tag to be. All of this is performed via command line, so it is scriptable. Since I lost it, I've been experimenting with -attedit. This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.
1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?
View 9 Replies
View Related
Oct 18, 2013
Background info:
We got several image files every 2 weeks which should be edited and mainly reduced in size for web purpose. This work needs 1 work day for one man/woman to do, because he/she has to open the file save for web and then set the quality to a value were the file is nearly about 150-200 KB in size.
The images are different, some have few colors, some have a lot of colors and there are also different in resolution. But they should not be reduced in resolution, only in quality. All other specs of the image should be kept
Is there any possible script, plug-in or similar which can do the same (Saving with a specific max. file size) in some automatic and faster way?
View 2 Replies
View Related
Nov 18, 2012
I did a search around, and did not find the answer. Basically I have attempted to create an action in Photoshop CS6 which will save a file in the tiff format after i crop the image. I want the file name to be the name of the image (which is supposed to change depending on name of the image) like this:
1280x720_MGXXX.tiff, where, in my case the XXX represents DIFFERENT NUMBERS.
I want to apply the action to one image at a time. Each image has a different number (name). I record the action, add the 1280x720 text to the image name in the Save dialog. I am saving the image in a different folder from the source file. The source file name is _MGXXXX.tiff (again XXXX is a number like 2220...).
When I run the action on a file, say "_MG2221.tiff" it adds the 1280x720, and saves the file. When I apply the action on the next file (_MG2222.tif), the action overwrites the existing file, 1280x720_MG2221.tif, with the image. The action always uses the name I entered in the Save dialog!! I think I was able to do this in CS4 and CS5.
I want to be able to open a file, crop and adjust it, and then save in a diff location with 1280x720 pretended to the file name.
View 2 Replies
View Related
Jul 15, 2012
How can you use a template file from your personal files to use it in an already existing .dwg file.
I knwo how to do it if I start the drawing from scratch and I select that template, but I want to put this existing drawing into my personal template file from my documents.
View 2 Replies
View Related
May 20, 2013
I am copying a design in the vault & when i go through all the files to ensure they are all to 'copy' there is several which I cannot change their status from 'reuse' to 'copy'
I don't have any of the files checked out & they are all the latest versions.
View 9 Replies
View Related
Mar 13, 2012
For my work I have to cut and change the size of images a few thousand times a day.
When I want to save a edited image to a file(every image goes to the same file all the time),I always have to search this file. How can I program CS5.1 to always go to that specific file to save the image. Instead of searching for the file all the time!
Second thing is that the images always have to be changed to the same resolution. Is there a way to 'automate' this. I Know: - File - Automate - Fit Image. But is it possible to do this with a key combination or make a 'button' somewhere?
View 2 Replies
View Related
Feb 23, 2013
There's a specific file I can't open. I've worked on it previously, but a week later, and it won't open. All of my other PS CS6 files are intact, and will open immediately. However, this one file takes so long to load (2+ hours) that I end up restarting my computer in order to work on all of my other things. The size isn't the issue, either; it's only 70 megabytes, as opposed to some of my more heavy-duty files that run upwards 200 megabytes.
I'm thinking about opening it on another computer to see what happens, but I'm concerned about the fact that I can't open this particular file. I'm not sure if it's corrupted, based on the fact that it just sits on my computer and just tells me that it's loading.
Is there something I can do to make it open, or modify the file? I've already tried defragging my computer and other things, and I'm at a loss here. I really don't want to start working on this from scratch .
View 4 Replies
View Related
Feb 4, 2009
Photoshop CS2 for Windows XP
When trying to attain a specific size for a JPEG image (60MB) I adjusted the image size by cropping the image to 8"x10", and changing the DPI to 450.
The image size window indicated that the file size was at 60 MB, which was the correct size that we wanted for the file.
After saving, the file size was way below the size indicated on the original image size (when the file was open). Upon reopening and looking at the file size, it indicated that it was still 60 MB.
I had done this same process with roughly 50 files and all of the sizes came up different (ranging from 6 MB-64 MB).
I also saved the images as PDFs after making some adjustments to the JPEG files, but the same problem of the file size changing still came up.
Does anyone know what would cause the image size to change so much?
View 3 Replies
View Related
Sep 13, 2012
I used to be able to just open any image and my copyright info would be inserted into the file data. I guess it was a droplet, "when the file is opened or created then add file info from a xmp file". I still have the xmp file with all the data in but i am unsure how to implement it being automatically opened and added to the file when i create a new one? I thought i could handle it, i assume its a droplet of some sort.
View 5 Replies
View Related
Apr 21, 2013
When trying to open a raw file in PSE 5 I receive the following error message
“Could not complete your request because the file format module cannot parse the file”
I checked and my camera Nikon D3100 is listed as a supported camera.
View 1 Replies
View Related
May 3, 2013
I needed a second audio file and created a layer and placed my video file that has the audio I want in that layer. I edited the audio in that layer and now I want to save the result as an audio file.. preferably an MP3 file. How do I select a specific layer and save just that layer as an audio file?
View 2 Replies
View Related
Jun 27, 2012
Using Photoshop CS5 and Windows 7. How do I get a photo file (jpg) to print at specific dimensions? For instance, I have a file open in Photoshop and it's dimensions are: width-3872 pixels and height-2592 pixels. I want to print and have the print size be 10 inches by 8 inches without distorting the image.
View 13 Replies
View Related
Jul 23, 2005
80% of the time I want to save my workfiles to a specific folder (i am quite organized when it comes to Creative Suite files) and I wondered:
Is there anyway to tell PS to go to that specified folder when I want to save, and not try to save into the folder where I found the last source picture?
View 2 Replies
View Related
Mar 12, 2009
Since CS4 came out I'm using Vista64 a lot more. One thing I noticed recently has me a bit curious if it's a unique bug in my install or whether it's "normal"..
When I right-click on install files, I don't see a 'Version' tab like I used to see with XP. For example, under XP, when I right-click the recent ACR update (Camera Raw.8bi) I see under the Version tab that it's "Written by: Thomas Knoll of Adobe Systems Inc, the version number, its 'internal name, language, etc.."
In Vista Right-Click-> Properties tab offers 'General', 'Digital Signatures', 'Security' and 'Details'. The 'Details' tab does not offer any of this info. It's a bit of bother to not be able to verify the version of a file before installing it.
Am I missing something or are there Vista specific file info tags that Adobe is not providing?
View 15 Replies
View Related
Nov 18, 2012
Like that PSE 11 Organizer opens with a specific file, like it did with PSE 9, 6 etc.
View 1 Replies
View Related
Oct 10, 2012
A client is running CS5. When we run an Action in Photoshop, either directly or through a Batch process, the name of the file changes to an old file name that actually existing in the file structure. It doesn't matter which file we start with, the name changes to this other name during the action. I've checked all the steps of the action to be certain there isn't a Save As command presenet. This has started happening with the past month. The Action has been in use for over a year.
View 3 Replies
View Related
May 11, 2012
Working from Lightroom in PS - trying to record action to simply flatten layers and File Save back to Lightroom. PS records specific file path of original image used when action was recorded. Is there a way to eliminate this specific path?
View 1 Replies
View Related
Feb 25, 2009
I've got Photoshop CS4 and have created an action. However, for the life of me, I can't figure out how to save the action to a file so I can share it with others. The action converts a PSD to JPG and exports it for the web. How do you save an action so you can share it? I don't want to share all of my actions -- just this one.
View 1 Replies
View Related
Apr 27, 2004
I made an action that saves a JPEG using Save for Web and it overwrites the existing file. Unfortunately when I run the action or use it in a batch it asks me if I want to replace the existing file.
How do I make it overwrite the existing file?
View 3 Replies
View Related
Aug 21, 2013
I want to create a specific blur trace file for my camera for using it in my capture sharpening job.
Or a web site link explaining how to create such a file?
View 2 Replies
View Related
May 8, 2011
Trying to streamline some work flow issues and would love to be able to "Save As" without having to navigate through file formats , say, .png - every time.
Is there a way to open the file browser in PS to a specific file format each time?
View 5 Replies
View Related
May 25, 2012
Is there a way, when saving jpg files to save as a specific file size, rather than quality level (currently using CS5)? I have a few clients (realtors) who require files to be 100kb (or smaller... but 100kb is the ideal to shoot for) for their listings.
Given I'm working with a number of images, I would like to be able to do this as a batch, rather than one at a time, getting as close to 100 as I can without going over, as I have to at this point.
View 13 Replies
View Related
Apr 30, 2013
I know how to crop images but want to be able to view the resulting pixel measurements (ie, 1600 c 1200 pixels).
View 1 Replies
View Related