Photoshop :: Matching Colour Of Faces With A Different Body
Jan 6, 2004
I make a 30-page jokey thing where I put my mates (and their girlfriends - those with a good sense of humour that is !) faces onto silly photos for a bit of seasonal cheer. Now, it looks OK, but obviously, sometimes the flesh tone isnt quite right. I know I can use the eye dropper, but it looks so obvious. Is there a way of matching tones throughout ? It doesnt matter that much obviously, for what its for, but it would be nice to make em look even better for next year !
View 1 Replies
ADVERTISEMENT
Sep 27, 2011
i've got these two faces that i'd like to put on bodies of other players.
Messi (it's the one on the left) fits just right, but Xavi's face looks unnatural somehow.
i tried playing with contrast, color balance, hue/saturation, adding noise, dodge/burn, but nothing worked.
View 6 Replies
View Related
Aug 31, 2013
i am trying to edit a photo from an image we took at a shoot and want to upload our faces to the body.
View 3 Replies
View Related
Aug 17, 2012
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
View 3 Replies
View Related
Sep 12, 2013
I have a multi-body part and want to find the both faces which divide the bodys. The first face I pick with the "SelectSet" command.The second one the program should find on its own.
If I pick a boundary face, it should give an error.
One attempt is to create a point on the first face and use the "LocateUsingPoint". But is there a more elegant way for this task?
(Unfortunately there are little examples of the topic multi-body parts.)
View 1 Replies
View Related
Feb 7, 2013
I want to find the intersection point between a cylindrical curve and faces in a body. I have the start point an start vector and a rotational velocity. With this values it should be possible to create this cylindrical curve.
Is there a function in inventor which I can use?
Currently I am using the function "FindUsingRay". But I thing that there is only the possibility to fire a linear function through the body.
Today I found the command "FindUsingVector":
Sub FindUsingVector(OriginPoint As Point, Direction As UnitVector, ObjectTypes As SelectionFilterEnum(), ByRef UseCylinder As [defaultvalue(-1)] Boolean, ByRef ProximityTolerance As [optional] VARIANT, ByRef VisibleObjectsOnly As [defaultvalue(-1)] Boolean, ByRef LocationPoints As [optional] VARIANT,
I did not find any information in the "Autodesk Programming help". what is the difference between this both functions?
Is the argument "UseCylinder" for a switch into cylindrical coordinate system?
View 7 Replies
View Related
Feb 27, 2009
Im working on a series of images from a photoshoot.
I am having massive problems with getting the background of each image to match with one another. Each image seems to have a slightly different shade background, so basically they all look inconsistent together.
Is there anything i could do which would easily match the background from the different images together?
Using curves doesnt really help and when i do get it right (slightly similar), skin tones are then off.
The photos are done in a studio and evenly lit, the backgrounds are pale blue!
View 1 Replies
View Related
Sep 10, 2004
I am currently working on a series of images for a calendar. All the photographs are portraits and were shot against the same backdrop.
I am working in Photoshop 7 and having scanned the images and given them a clean they all have different casts. Is there some way of matching the colour of one image to another, rather than attempting to do it by sight and botching it up?
View 8 Replies
View Related
Apr 6, 2004
I'm changing car colours using Photoshop Quick Mask, Inverse and Layers functions. Works well but how do I match the new selected colour's hue/saturation/brightness exactly to a specific car paint colour I want?
View 6 Replies
View Related
Nov 9, 2013
I created a solid, shelled it, and then converted to sheet metal. I am now trying to indentify the bends but I am getting the error: Bend 1: Could not build this Bend; No matching faces found.
View 5 Replies
View Related
Dec 13, 2008
I am trying to do a funny xmas card for work. I am cutting out faces of members of staff and putting them onto different bodies, can someone please tell me how to match the skin colour so the pic looks as real as possible
View 3 Replies
View Related
Aug 3, 2004
I'm using a feature photo in an article and I want to match parts of the image to the two main colours in my destination image. Usually I would add a colour adjustment layer and trial/error my way there using my eye to guide the sliders, but I'm wondering if there's a better way to go about this. Something tells me the eye-dropper should be playing a part,
View 1 Replies
View Related
Nov 11, 2012
I'm using CAD 2009. I've inserted a Bitmap image (a company logo) and I want to insert text with the same colour as the logo.
Can I sample the colour in the logo and apply it to the text? NB - I really don't want to go through all the colour options in CAD to find the nearest match.
I want to do something like the Microsoft Paint 'Pick Color' option.
View 3 Replies
View Related
Dec 10, 2012
Any way of forcing an update of the colour styles from the original Multi-Body part to the assembled/derived components.
I always control colours in the original Multi-body part as I can select groups in one go to change colours, this doesn’t filter down to the derived/assembly component I then have to go into each part and uncheck then recheck the 'Use color override from source component'.
I am aware of the reg file/vba to remove the source override completely but which works for certain ways of working / problems, but I want to control it from the original part which I assume was the way it was intended as it is the default option!
Win7 64 Pro - Asus P8P67 PRO - i5-2500k CPU O/C@4.5Ghz- OCZ Vertex 2 SSD - 8GB Ram - GTX550 Ti - SpaceExplorer.
View 7 Replies
View Related
Sep 12, 2013
Can I export a solid from a multi body part to an other part file. how?
View 1 Replies
View Related
Mar 8, 2012
How can I convert a surface body in a solid body?
I attach my file.
View 3 Replies
View Related
Jan 11, 2013
i got Inventor recently, and i've been working on a model of a longboard just to teach myself how to use the tools in Inventor. right now i'm trying to color areas for the griptape pattern so i drew the 2D pattern and projected it onto the 3D model of the longboard. but when i tried to split the faces of the model along the projected pattern only a few of the projected lines split the faces. for other faces i kept getting these errors:
Create parting line failed Crane.ipt: Errors occurred during update Split11: Could not build this Split The attempted operation did not produce a meaningful result. Try with different inputs.
View 1 Replies
View Related
Jun 18, 2013
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies
View Related
May 21, 2013
I am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
View 2 Replies
View Related
Aug 19, 2013
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
View 2 Replies
View Related
Aug 10, 2013
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies
View Related
Feb 25, 2004
I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies
View Related
Dec 19, 2011
I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies
View Related
Aug 11, 2013
How do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
View 4 Replies
View Related
Jul 16, 2013
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
View 9 Replies
View Related
Jun 11, 2012
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies
View Related
May 23, 2013
Adobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies
View Related
Jan 28, 2012
Any method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies
View Related
Jun 24, 2011
I am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
View 1 Replies
View Related
Jul 28, 2012
copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies
View Related
Sep 12, 2013
I have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies
View Related
