I am trying to do a funny xmas card for work. I am cutting out faces of members of staff and putting them onto different bodies, can someone please tell me how to match the skin colour so the pic looks as real as possible
View 3 Replies
could anyone tell me how to match the skin color of somthing with mine like pulling somthing off somone else like a tatoo or a scar and making it look like its ment to be there like the same skin color?
View 1 Replies View RelatedI have a number of photos to retouch and balance skin toning. The basic problem is that the young lady in the photographs has two distingt skin tones but no clearly defined 'tan line'. The differences are detectable and visible (between her back and backside for instance) and I guess caused purely by sun exposure pigmentation versus those bits that never see the sun!
View 1 Replies View RelatedI was wondering if anyone knew of any tutorials on matching skin tones, for example if I wanted to use a persons head from one image and place it onto the body of another.
View 4 Replies View RelatedI'm doing this for a project, and I need to make those stitches look realistic. I've tryed changing the hue/saturation, exposure, levels, curves, etc. But i can't get the skin tone of the stitches to match the skin tone of the picture.
i want the skin tone behind the stitched to match the skin tone of the face, however i want it to look realistic.
I'm working with 2 pictures of people. My goal is to replace the face-parts (lips, eyes etc.) with each other.
So person 1 will get the mouth of person 2, and backwards. pretty simple, as all I have to do is match the skin color, and from now - piece of cake. (I actually said piece of cake :P )
So, what I normally use are only 2 tools: Hue/Saturation, and Color Balance.
Problem is - it's still pretty difficult to get perfect results. and beyond that, sometimes I just can't manage to get to even a normal solution. so it's very frustrating.
My question is: What are all the tools that are used to match colors?
(Until now, what I basically did is: take the slider, move left - check if better. if not: move right - check if better, if not: return to center. like this with each slider of the 2 tools I mentioned above. doesn't sound very professional, huh?)
P.S. A reference to even a bunch of tutorials and guides about coloring, would mean THE WORLD to me, as around 60% of my Photoshop are coloring and stuff like that.
matching the skintone of an object which I am pasting onto another skin tone.
View 2 Replies View RelatedIm working on a series of images from a photoshoot.
I am having massive problems with getting the background of each image to match with one another. Each image seems to have a slightly different shade background, so basically they all look inconsistent together.
Is there anything i could do which would easily match the background from the different images together?
Using curves doesnt really help and when i do get it right (slightly similar), skin tones are then off.
The photos are done in a studio and evenly lit, the backgrounds are pale blue!
I am currently working on a series of images for a calendar. All the photographs are portraits and were shot against the same backdrop.
I am working in Photoshop 7 and having scanned the images and given them a clean they all have different casts. Is there some way of matching the colour of one image to another, rather than attempting to do it by sight and botching it up?
I'm changing car colours using Photoshop Quick Mask, Inverse and Layers functions. Works well but how do I match the new selected colour's hue/saturation/brightness exactly to a specific car paint colour I want?
View 6 Replies View RelatedI'm using a feature photo in an article and I want to match parts of the image to the two main colours in my destination image. Usually I would add a colour adjustment layer and trial/error my way there using my eye to guide the sliders, but I'm wondering if there's a better way to go about this. Something tells me the eye-dropper should be playing a part,
View 1 Replies View RelatedI make a 30-page jokey thing where I put my mates (and their girlfriends - those with a good sense of humour that is !) faces onto silly photos for a bit of seasonal cheer. Now, it looks OK, but obviously, sometimes the flesh tone isnt quite right. I know I can use the eye dropper, but it looks so obvious. Is there a way of matching tones throughout ? It doesnt matter that much obviously, for what its for, but it would be nice to make em look even better for next year !
View 1 Replies View RelatedI want to upload on my web site students and college colour portrait photos (in contacts sheets) but they have different skin colour ( most has yellow cast but some don't).
Is it possible to make some action (to take initial colour of some proper skin colour of the portrait) and apply to all pictures. Maybe some plugin is available.
I'm using CAD 2009. I've inserted a Bitmap image (a company logo) and I want to insert text with the same colour as the logo.
Can I sample the colour in the logo and apply it to the text? NB - I really don't want to go through all the colour options in CAD to find the nearest match.
I want to do something like the Microsoft Paint 'Pick Color' option.
I occasionally use GIMP to burn-down parts of portraits that compete with the face. For example, bare shoulder, midriff over-light, hands over-lit.
The skin ends up looking greyish, not like less-lit skin. It works not too badly visually, as the emphasis is on the face, but fails on inspection.
I have tried the burn tool and just plain old Brightness, both on a selected area.
David Boxing_WIP.png (202.28K)
Number of downloads: 19
Could I have a description of how to match the skin color of the head to the boxer's skin color?
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies View RelatedI am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies View RelatedI've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies View RelatedI have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies View RelatedHow do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies View RelatedAdobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies View RelatedAny method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies View RelatedI am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies View RelatedI have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies View Related
