Photoshop :: Making Selection On Paths

Oct 17, 2012

I may have changed a setting somehow. When I go to "make selection" of my path it only selects the very outside border of what I outlined and not anything inside of it. Also I have to select "inverse" before I copy and paste to get the part of the image I want.

View 1 Replies


ADVERTISEMENT

Photoshop :: Feathering A Selection Outwards After Making A Selection

Dec 26, 2003

If I have mad a selection with say an ellipse marque, of say 100px and now I want to fether that same selection outwards, ie to start the feather 10 px outward of the 100px selection so that the 100th px has a 100% transparency and the 110th px has a transparency of zero,thus making the new selection 110px, how could I go about doing it. With the current feathering of the selection, it feathers only in the marquee already selected, not outward, and you cannot place negative feathering px. I know that there is most likely some sort of a ration where you would expand the selection by a certain amount of px, and then apply a ratio of feathering to it to enalble it to feather outside of the 100px marquee.

View 3 Replies View Related

GIMP :: First Selection Disappear While Making Second Selection

Nov 21, 2013

Every time I make the second selection in a picture with the lazo the first selection disappear. what can I do to fix it?

View 8 Replies View Related

Photoshop :: CC - Working With Paths / Direct Selection Tool

Jun 19, 2013

Since version CS it was very easy working with paths with the direct selection tool. I just upgraded to Photoshop CC, and noticed this annoying bug:
When I select and anchor point using the Direct Selection Tool, I can no longer de-select it clicking inside the shape. This is so frustrating when working with icons.
 
I used to grab the Path Selection Tool to select the entire vector shape, then I switched to the Direct Selection Tool  if I wanted to modify a specific anchor point. All I needed to do was clicking inside the shape, then select the anchor point I wanted to work with. Now if I switch from the Path tool to the Direct Selection one, if I click inside the shape it doesn't deselect anything, if I click on an anchor point, it doesn't deselect the other anchor points. I figured out that if I click on the path of a different vector shape, then I can go back and select an anchor point on the vector shape I was working with, but it's too much work for de-selecting a point.Is it a bug or a new way Photoshop CC behaves?

View 20 Replies View Related

Photoshop :: How To Use Same (selection) Paths In Multiple Images For Batch Processing

Mar 9, 2013

I have a whole bunch of photos I need to batch process, but, when creating an action for this, I stumbled upon the problem that the paths I selected with the pen tool, and saved under the "Paths" tab need to be in every image for to be used in the action.

View 1 Replies View Related

Photoshop :: Elipse Tool Paths Disappear When Try To Make Selection?

Apr 23, 2013

My elipse tool paths (multiple in one document) disappear when I try to make selection. Is this a bug or is functioning of the tool different in CS6?
 
on a mac mini, cs6 photoshop 13.0.4 x 64

View 11 Replies View Related

Photoshop :: Pen Paths (brush Stoke) Filled With Color Only On Selection

May 21, 2013

This is what I'm trying to make...

The black lines would be the pen paths (curved shapes) with a brush stroke, but then I would like to select an area of all those pen paths lines (like you for example do when using marquee tool) (in the example green color) and fill the path lines with for example green only on that selected area and the rest stays black in this case and only the lines would be filled, so not the white space between. I kind of did it in Illustrator using scissor tool, but cutting all the paths takes a lot of time and precision so I thought there might be a better, easier, more precise way to do this in photoshop. how to accomplish something like that?

View 7 Replies View Related

Photoshop :: Making A Selection

Aug 16, 2013

For example, I will use the lasso tool to make a selection on a photo, as soon as I attempt to do this the image disappears, goes black, it will flicker on and off, when eventually the image reappears the selection has not been made. This is the new Photoshop CC.
 
<moved from download,setup&install by mod - kglad>

View 1 Replies View Related

Photoshop :: Making A Selection

May 23, 2009

I am trying to make and save a selection to then manipulate.  (I am following two different books.)  In my attempt to make and save a selection, I've used several of the selection tools.  I can easily get to the point where I have the 'marching ants' around the selection. 

But when I try to save the selection a little window comes up that says there are 'no pixels selected'.  I get to the point (using, for example, 'load selection' and 'save selection') that I name the selection but when I hit 'OK' the 'no pixels selected' notice pops up.

I've created a new layer and tried to save the selection in the layer.  Same 'no pixels selected' notice comes up.  I've tried to simply 'save the selection' - same 'no pixels selected' notice appears.  I've tried 'copy as new layer', I've even tried to drag the selection over to the layer - nope, doesn't work! 

Oh, and the really frustrating thing is that when I click out of the 'no pixels selected' notice window, my marching ants are gone and I have to start all over.  How do you 'get' the selection into a layer?

View 5 Replies View Related

Photoshop :: Making A Selection

Oct 4, 2005

I was hoping someone could tell me what the best way would be to isolate the palm trees in this photo. I want to make a silhouette out of them.

View 9 Replies View Related

Photoshop :: Making A Selection?

Nov 1, 2007

I am trying to cut parts of a face out but just leave the eyes/mouth/and browse in tact and from what I heard I have to press ALT while making my selection but when I do that one part it's fine, but then when I press alt again on another part and make a selection I do not get those little crawling ants to show me what I have selected.

I am using the lasso tool.

View 2 Replies View Related

Photoshop :: Making Aliased Selection

Mar 27, 2012

I have a lot of images that were rendered out of 3DS MAX. A long time ago I recorded an action to make an alpha channel, use it as a mask, and save as 2 different file types. Worked great. Now, I need to open a bunch of these and somehow get rid of the anti aliasing around the image. I need crisp jaged edges. how to make an aliased selection?

View 3 Replies View Related

Photoshop :: Making A Clean Selection Of Tree

May 31, 2013

I need to make a selection of this tree:

so that it looks like this:

and its proven to be very difficult. My tree looks pretty terrible, and it's definitely not as clean as the tree in the poster. I'm using the quick selection tool.

View 3 Replies View Related

Photoshop :: Making A Selection Around Multiple Layers

Jun 26, 2012

Before I start looking for work on transforming PSD's into working websites, I would like to learn some of the functions and features of Photoshop Creative Suite 5.1.  
 
I recently learned:

Ctrl + Win + Click on Desired Layer… To make a selection around the layer 
 
Then I clicked on, "Refine Edge"… I was able to make a perfect selection around what I wanted using this feature. Very nice, by the way.  
 
There were multiple layers, I merged the visible ones to make one layer. All of the stuff that makes up the banner, at the top of the page. My question is:
 
Can I make a selection around multiple layers, i.e. buttons, other pictures, etc.?
 
Side note question:

Does the document size have any effect on the overall size? Meaning: let's say that banner up top is 775 pixels across & maybe about 450 pixels tall… That's about the size of the image (the selected layer). The document size is laying on, is also 775 pixels across… But, 950 pixels tall. Will that document size have any effect on load time for a webpage?

View 9 Replies View Related

Photoshop :: Making Selection In Illustrator - PS Integration?

Nov 25, 2012

I was wondering whether one could proceed as follow. Say, you want to make a vector mask of a given image, part of a photograph. One could of course use the built-in vector features of Photoshop (pen tool, vector shapes tool) to create the vector outlines used for the mask. But, it is possible to export the image in Illustrator, use all of the Illustrator vector tools to create the vector outline, and then import those vector outlines back into Photoshop, at the *exact* same place as they were in Illustrator (relative to the image being traced/masked).
 
I know how to go back and forth between Illustrator and Photoshop, but I don't know how to ensure that the vector paths (from Illustrator) and image (from Photoshop) keep their relative positions between the programs.

View 2 Replies View Related

Photoshop :: Button Set - Stuck At Making Selection...

Apr 24, 2009

I have been trying to create a button set with a foreground shape. What I am trying to accomplish is when this guy creates a selection with pen tool and deletes part of gradient from the button set, this gives it a shape/theme to the button set – This way I can create any shape on the buttons and they look like a theme. (maybe I am not explaining well but you get the idea) Where I am stuck is when I select all buttons and apply gradient to all, it only applies to a single layer (button) instead of all even though I can see all selected. Also when I make selection with pen tool and delete the gradient, it deletes from only one. 

View 2 Replies View Related

Photoshop :: When Making Selection With Magic Wand Cannot Stroke It

Mar 12, 2011

why is it when making a selection with Magic wand I can not stroke it,I need to switch tools to get it done.

View 8 Replies View Related

Photoshop :: Making A Selection Using CTRL+Click Layer Accurately

Feb 27, 2012

For some reason when I make a selection using CTRL+Click it never fully matches the cutout of the layer I am mimicking.  There is always trim. I've posted a picture to best describe what is happening. 

Fig A.
I've made a cutout using the background eraser.  Because of this you can see how the cutout appears to be somewhat transparent around the edge.
 
Fig B. 
When placed on 50% gray the hair trim is as detailed as I wanted.  It's a satisfying result.
 
Fig C. 
I now make a selected of this semi transparent cutout by cimply CTRL+Clicking the layer. 
 
Fig D.
I now duplicate the original (not cutout) and use this selection to cutout again (don't ask why) but the cutout doesn't match 100%.  It's close, but it simply doesn't match.  I've also tried using this selection to make a mask on the non cutout image and the edge is exactly the same.
 
I thought some auto anti-alias may be turned on but I can't seem to find anything.  I really need a duplicate of this cutout to match precisely.

View 10 Replies View Related

Photoshop :: Clear Backgrounds Making Selection Black Not White?

Oct 19, 2011

I am having some trouble clearing out the backgrounds of certain images. I'm taking images and want to quickly delete out any pixels not on the product I'm shooting (make all pixels white). Once I have my selection I go to "Edit" and then "Clear". Instead of making the selection white, it makes the entire selection black.

View 3 Replies View Related

Photoshop :: In/decrease Points Used When Making Work Path From Selection

Aug 22, 2007

I'm sure you know you can convert a photoshop path in to a direct selection, but did you know you can convert a selection into or back into a path?

It's as simple as making a selection via a lasso tool, marquee box or magic wand, open the path window from windows and press the "make work path from selection" button on the tool bar. It is as easy as that. However the toolbar button defautls to a tolerance of 2 pixels which can give you a loose fitting path in places.

View 1 Replies View Related

Photoshop :: Why Does Making A Selection Inside Of A Smart Object Disable Free Transform

Nov 14, 2012

Why does making a selection inside of a smart object (say with the rectangular marquis tool) disable Free Transform?

View 1 Replies View Related

AutoDesk Smoke :: 2 Second Delay When Making A Selection?

Mar 31, 2013

Ive recently started having a problem w Smoke 2013.

Whenever I select ANYTHING (click on an item) there is a 2 second delay before it actually selects and hi lights the item. Its a really annoying delay.

Ive never had this issue before. Happens with just about any command I have Smoke do. Moving the timeline and zooming have the same issue.

This only happens with Smoke. Not with any other program I use. This happens when all the time. Even when Smoke is the only program I have open.

Currently TRYING to LEARN (key words): SMOKE for MAC
Currently using: Final Cut Pro 7, Photoshop/After effects on CS6
Current system:
MacPro5,1
12-Core Intel Xeon 2.66 GHz
RAM: 12 GB
ATI Radeon HD 5870 1024 MB
OSX 10.8.3

View 8 Replies View Related

GIMP :: Making Floating Selection Blend In

May 20, 2012

I don't know if what I am asking is allowed because I am trying to make something adult oriented...

I want to turn a dragon picture into an adult furry picture by adding a ***ina to it, I have selected the part from another photo but I want to adjust the color of the part to match the dragon's skin color..

View 4 Replies View Related

CorelDRAW Graphics Suite X6 :: No Dragging Of Objects While Making A Selection Window

May 11, 2012

 While making selection by drawing a selection window, the objects often get seelected and get dragged. These objects lie on the starting vertex of the selection window. Therefore I have to find the desired bjects to be selected in object manager lying in haphazard order. Is there a way , the objects don’t get dragged while making a selection window from left to right. That means, the objects get selected which are present in the selection window only. 

Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM

View 8 Replies View Related

Illustrator :: Joining Paths To Create Shape While Retaining Original Paths?

Feb 23, 2014

I want to join two paths to create a shape that I can fill but at the same time retain one of the original paths (the red one in the image below). I can copy the path I want to retain but surely there is a more elegant solution. See below for for an illustration:

View 6 Replies View Related

Illustrator :: Cannot Lock Other Paths / Unlock All Paths In Symbols?

Dec 4, 2012

Cannot lock other paths/unlock all paths in symbols?

View 8 Replies View Related

Photoshop :: Why Vector Selection Tool (white Arrow) Change Layer Selection To Another

Sep 1, 2013

I have been continually annoyed, when creating a vector mask-heavy document, with trying to select vector mask points by dragging a rectangle only to find that it instead selects a layer higher up which has a larger vector mask.
 
The only workaround is to manually select the points of my mask or to drag a rectangle from outside the canvas, meaning I have to zoom out or scroll to the edge - sometimes annoying if I am zoomed in quite far.
 
I know that the move tool can be set to automatically select a layer, depending on what part of the image is clicked, but why is there not an option to turn this off for vector editing?

View 1 Replies View Related

Photoshop :: Selection / Patch - Select Blue With Quick Selection Tool?

Dec 10, 2012

If you look closely in the attached picture, there is a spot of light blue on the player's helmet, that looks like a mistake (think it should look like the grass behind it)...though it actually may be part of his helmet.
 
Regardless, I'd like to take it out. My idea was to select the blue with the quick selection tool, then bring that selection out to the grass, select the grass with that size/shape of selection, copy/paste and then bring the grass selection into the blue part so it looks like grass in what was the blue part.
 
The problem is I don't seem to be able to move the selection without taking the blue with it (so it's not an empty selection and therefore can't select a piece of the grass.)

View 2 Replies View Related

Photoshop :: Selection On Sliders And Curves Altered When Click Off Them After Initial Selection

Sep 13, 2012

I have Photoshop CS5 on a Mac OS 10.7.4 My problem is that when I am using curves or a slider, my selection does not stay in the same place. For example, I chose the number 8 on a slider, after I release my selection it will either go one number after or before my selected number. I have had this problem since I got my computer, December 2011, but it has only recently started to frustrated me because of having to use Photoshop a little more than I usually do.

View 2 Replies View Related

Photoshop :: Complex Selection - Best Selection Method To Drop Out A Background

Oct 24, 2011

how to "drop out" the background from this photo (I have loads to do which are very similar). Thus far I have tried channel selections and the calculations tool + all the normal quick selection tools and I just cant get it to work without spending hours adjusting things. The end effect I need to achieve is a perfect white background without loosing any of the detail if possible. On a side note I have also tried taking the photo on blue, green, black and white backgrounds but due to the number of colours present in the products its just not working for me.

View 5 Replies View Related

Photoshop :: Make A Selection Out Of A Text And Expand The Selection?

Sep 1, 2006

Using photoshop, how do you make a selection out of a text and expand the selection?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved