I am trying to make a photo like a water color. The formula I am using has me
Apply filter->Dry Brush
Create New Layer
Add Layer mask
Then Edit->Fill->Use Pattern->Custom Pattern
However, under 'Custom Pattern' it says select 'Gouche Light on Watercolor' but this is not an option. How do I get 'Gouche Light on Watercolor' to show up?
I need to know the area in the elements 10 that I can change a photo into a water color looking photo?
View 1 Replies View RelatedI want to make a fountain that has water jets that cause ripples when they hit the water. I have tried the basic reactor water and Pflow setup, as well as super spray, but neither seem to work. Is there any way to accomplish this without "faking" it by doing something creative with the water's texture?
View 9 Replies View RelatedHow do I make a photo sepia and leave an item in the photo the original color?
View 1 Replies View RelatedIn the image below I have an aerial photo of an Island. I need to make it so as water areas are black and land areas are white (not greyscale) almost like a silhouette. My first plan was to draw round the island with a black paint brush and then use the "bucket fill" with a suitable threshold to fill all of the areas up to the black outline with black, however this doesn't work as the bucket fill either breaks through the black line or when I reduce the threshold, doesn't color the water areas solidly.
View 3 Replies View RelatedHow does one convert colour to a black and white photograph so that it looks like a print from a black and white negative?
View 5 Replies View RelatedI am doing a thermography project for a wedding in which the printer will only do two-color processing. the text will be black and a cherry blossom jpeg is illustrated in watercolor-y pinks. all will be raised printing. how do i transform the watercolor-y pinks to one pantone pink without losing the brush stroke quality of the image? do i select & replace color pixels varying the translucency of one pink pantone color? is there an easier way? i am using photoshop cs on a mac.
View 4 Replies View RelatedHow do you create a true black and white photo from an original color photo. i know you can select greyscale but that isn't a true black and white photo(i don't think).
View 6 Replies View RelatedI am a beginner. I am looking at different progams to see which one suits me better and easy to work with. So far adobe isn't easy at all. Is there a way to take a black and white photo and make one thing in the photo in color? I have elements 11.
View 3 Replies View RelatedI recently made an interesting picture that kinda looks like water,
to make this look like real water?
Just wondering if anyone knows a great fast way to remove water from a surface in a photo. The water splashes in the photos I am editing appear as dark spots(it is water on an interlocking pool deck), I want to remove the water.
I am currently using a combination of cloning, stamping, copying objects, and playing with brightness and contrast. But it is VERY time consuming. I edit photos of swimming pools quite regularly, and water on decks can be quite a problem, so I need a faster method, if anyone knows of one?
How can i make this glass in water effect,
View 3 Replies View RelatedI took photos at a wedding over the weekend. The river behind was a perfect setting however, the water was brown from recent rain. I'm using Elements 11 and I'm wanting to know if there is a way to make the water look less brown and more blue?
View 3 Replies View RelatedI really like the way the artist has painted these trees .
How can I do this in photoshop?
how to get a brush with a watercolour effect where the painted colours bleed into one another and kind of splurge around! Do I need to use a filter?
Can Ill CS6 do a Trace on a photo and make them editable to change color?
View 1 Replies View RelatedI'm trying to take a black and white photo of a flower and ONLY make the flower in color.. like a layer.... I've tried using the adjustment brush, but that doesnt work well..
View 2 Replies View RelatedWhere did the reactor? How to make animate water in the 3D Max 2014?
View 1 Replies View RelatedI'm new to Gimp - I've had it installed on my computer for a while now but haven't tried to use it because it's got so many features it was just - well, intimidating. But now I've started a big scanning project involving a lot of old family photos, and as you can imagine they're not all in good shape. So I have some repairs to do.
The first one I scanned turned out pretty nice, but the second one is challenging me. It dates from about the 1920s and looks kind of sepia-toned but I had to scan it in gray shades because of a kind of moire pattern at the bottom (it's mounted on a piece of thick cardboard which is bowed and I had trouble getting it to lay flat on the scanner bed, so maybe that's why). The black-and-white image that resulted actually looks better than the sepia, but there are a lot of water spots in the upper left corner. Some of them are really large and in many different shades of gray, which is making it almost impossible for me to fix them using the cloning tool. I thought about just copying and pasting from a better section, but all those different gray shades mean that didn't work very well either. I can crop some of them out, but not all, and besides, the cropping changes the composition of the photo, and not in a good way.
Obviously I don't have great skills with this software (although I'm thinking that might be different by the time I get this project finished ). FYI, the version I have is 2.6.11, which is probably old; I could update if necessary. And it's running in Windows XP SP3.
See the image.
I have a pic that has a really pretty view of a bridge over a little stream. Only problem is the water is covered with slimy green algee.
View 5 Replies View RelatedI'm trying to make a 3D model of my water droplet photo. Any software that can scan my photos, convert it into 3D shape?
View 2 Replies View Relatedany tutorial to transform a brush of water, in "water authentic"? Color, brightness, etc .........
View 4 Replies View RelatedA water reflection like this hopefully: [URL]
-Okay, so what do I have to do? I've seen a tutorial on how to do this on Youtube but I didn't quite understand it.
First attempt:[URL]
In this animation attached, please see the water and land interface on the left side of the green land object. Notice when the land object moves to the left, the blue water kind of ripples and flickers at the edge. Do you know what is happening and how to resolve this? How can I make the edge of the water smooth with no flickering?
The land is a a box with a good number of subdivisions with a displacement map making the height of the land. It is the animated displacement map and textures that make the land look like its moving over to the left. There are no bump maps. The water is just a long flat box with many subD's
I have tried increaing the subD's in both water and land objects , but nothing. The animated displacement map should not be producing such jitteriness like this. The grey scale image for the map is very smooth with soft gradients. I rendered with MR, 1/16 sampling, jitteriness checked,
jitteriness_between_land_and_water.mov
Win7 Pro 64bit
I7 3680 6 core 12MB cache w Corsair H80 liquid cooling
ASUS P9X79
32 GB DDR3
NVidia Quadro 5000
3TB WD
I'd like to know how to make squirted water drops. I'll give them a solid fill; it's just how to create the shape that I'm after.
Here's a hand drawn image of what I mean: [URL]
i want to know how to make a realistic single water droplet falling from the sky
View 1 Replies View RelatedI have a solid color and apply the water color effect, though it doesn't do anything to the solid fill? I am applying the effect that is under Photoshop filters. Is this only meant to be applied to bitmaps?
View 1 Replies View RelatedI would like to make a color selection and then make a mask of that color. How on earth do I do that?
View 5 Replies View RelatedI have Photoshop Elements 10 which I work with sparingly. I would like to outline a section of the photo (a face) and somehow select it to be the whole photo - in other words to get rid of all background elements. I can outline the area with lasso, but do not know how to just save that area. When I save, the whole original photo is saved. I also tried the magic extractor, which really worked to make just the face and crop everthing else out, but it has a white background the same size as the original photo, which means it is essentially a reactangle with a face in it. I am trying to just get the face so I can paste it into a document, sort of like when people put heads on fake bodies. This is for a church newsletter. I have done this with my old Picture It software, but that was on my old computer. I think I should be able to do this with all the gadgets Photo Shop has, but I must be missing something.
View 2 Replies View RelatedI have two photos, shooted probably the same day, by the same photograph in the same place !But the pose is a bit different. first one is in high resolution and in black & white nuance. second one is a small resolution and in full colors.
I wish re-color the black&white photo using exactly the same nuance from the colored one.
can i "copy" all the colors from the color-one to the b&w one ?
i hope there is a quick way to do that with adobe photoshop or with a commercial plugin. Something like : i load the first one (color), i load the second one (b&n), and i press Ok and magic appears !
here are the photos :
the black and white to recolor
[URL]..........
the source color to use
[URL].........
I have a picture of a cabin on a lake, I want to use this as the flash intro for a website. I would like a mist to cover the picture and then float away, and the water in the lake to "shimmer" or make it look as if it is "moving"...kind of like you were looking at a video clip, not a static picture.
Is this something I would do in any of the creative suite programs? or studio 8 programs? or is it something completely different.
To create a special effect (but not TOO garish!) I'd like to change this brownish meadow so that it looks much more like one of the swatches from my color swatches panel.
Do I need to create a new adjustment layer, or are there other approaches? Below is a screen shot.
