Photoshop :: Losing Color Intensity
Aug 27, 2008
I am trying to provide an image to an ad company for printing. When I change the color mode from RGB to CMYK, I lose the beautiful intense blue of the sky. I have tried to get this intensity back through photo filters, curves, levels, saturation, variations, color balance, selective color, and the channel mixer to no avail. Can anyone give me some tips on this? (I freely admit that my solution will probably be found in some combination of the above!)
I am using PS CS2 on WXP xp2.
View 7 Replies
ADVERTISEMENT
Nov 15, 2013
The EIZO CG223G monitor color intensity using PSE 11 Organizer differs significantly from using Fotoeditor for the same tiff and jpg files.
How to make the color rendering the same?
View 2 Replies
View Related
Jun 26, 2013
How do I convert my cr2 image from camera into a jepeg to send online without losing the color and quality of the cr2 image? Mine gets really bad when I convert to jpeg. Can I size a cr2 also?
View 4 Replies
View Related
Jun 16, 2012
Why am I losing the effect/color when going from duotone, tritone, etc. to rgb? Not using spot color, just using the picker to select the colors.
The when I try to change modes to RGB so I can save as a jpg it goes all b&w. Never had this issue before. This seems to happen only when I use the artistic filter graphic pen. I go to graphic pen use it, then grayscale, then duotone, then rgb.
View 3 Replies
View Related
Dec 8, 2007
I have a diamond image, which obviously has different shades in it, it actually has dark, like dark brown shades, which i want to change to lighter smth like light yellow, i tried replace color, hue/sat//light but the effect is not realistic like an actual diamond looks, it is loosing its luminosity. i even tried with magic wand tool, by selecting each darker part and changing color, but it does'nt look realistic either.
I m using Photoshop 7.0
View 4 Replies
View Related
Nov 12, 2013
Working in BRidge and Photoshop CS6:I have 160 color adjusted hi-res CR2 RAW files from my photographer, thought I was getting tifs. I need tifs for my INdesign file. I tried using the photoshop image proecessor through brige by selecting all my images and then saving as TIFFs but I am losing all my color correcting? Is there a way to save these out as tiffs as a group and not one at a time? I also might have lost my color correcting when I copies them all to one folder as well...not sure what is happening except now my great product shots look like crap.
View 8 Replies
View Related
Jan 2, 2013
I use my Ligthroom 3 for over 2 yeasr now and I had never such problem before. During exportin my pictures to HD I loose saturaion for orange. Whatever format I use problem remains the same. Both my monitors I use are calibrated so there is no colors distortion, especialy that it happen to orange only.
View 2 Replies
View Related
Aug 20, 2012
I'm using Photo & Graphic Designer 2013. I notice that the buttons are now under the Page Elements menu. I'm trying to figure out how to change the button color without losing the 3D effect. The Help says:
�Change the color by clicking on the appropriate colors on the left end of the Color Line and choosing 'edit'
if I just highlight the button and change the color, it turns the button into a flat color.
View 6 Replies
View Related
Jan 17, 2009
way to quantitatively measure the level of light intensity in different conditions. I know there are light intensity gauges that measure lumens and fc's but I was wondering if there is a way to measure the brightness of an image using photoshop?
So far I have noticed that there is a way to change basically everything about an image but I haven't found anything that gives me information about the picture itself besides its size and resolution.
Does anybody know how to measure light intensity or brightness of an image?
View 5 Replies
View Related
Aug 5, 2009
I'm trying to make a nice photo for a couple of friends, and I have the following disturbing problem in the image:
The lamp in the background is very strong and it bugs the eye -
How do I reduce the brightness of the lamp?
I have already sharpened the image and also reduced some lens blur in the black skirt area
View 3 Replies
View Related
Apr 16, 2013
When I first started using CS6 I would edit my photos and when I used "save as" to save my photos then open them in a different photo viewer they would have lost a lot of color and contrast. When I reopened them in CS6 they still had no color. This is all occured on my PC. I used to use PSE 7 (on my PC) and the "save as" function to save them and they turned out fine. I recently got an iMac and when saved on there the same way and reopened in a different viewer they'd have the correct color,
but when opened on my PC the color would be lost again. Also tried opening the images I saved on my PC in CS6 on the iMac and they still had no colo/contrast. So that would mean it's not a monitor calibration thing. I'm trying to figure out how to save my photos so they have the best quality they can have for printing and also the correct color for clients to view on their computers.
PS: I did use the "save for web" option on my PC and the photos have the correct color that way! But those aren't the proper size and stuff for printing. Also I'm very new to iMac and full photoshop so I'm not sure what sizes/pixels/color modes/etc are normal or what photos are supposed to be.
View 1 Replies
View Related
Jan 17, 2012
Is it possible in GIMP to equalize the intensity of different pictures? So that the pictures have the same brightness and that the color curves (histogram) are identical?
View 1 Replies
View Related
Jul 25, 2013
I have an image which i would like to measure the pixel intensity along a specific vector. I do not want the total pixel intensity for the entire image, i would like to draw a line, ie with the measurement tool and get a graph showing the pixel intensity as you travel along that line.
View 5 Replies
View Related
Mar 29, 2011
Is there a way of adjusting all the colors on a design to 50% to 25% of their intensity at the same time rather than do it one by one?
I went to print>misc.>proofing options: but I only see full color proof and no addition level setting.
It's probably an easy step but i just haven't figured it out yet.
View 11 Replies
View Related
Mar 8, 2013
Is it possible to make a heat/intensity theme map with Autocad Map3d?
View 9 Replies
View Related
Apr 11, 2011
With Quicksilver renderer, if I lower the value of shadow intensity in render settings, the shadows still appears total black as with the value 1.0.
However, this same parameter in viewport settings works fine with Nitrous.
View 1 Replies
View Related
Jun 22, 2013
monitor preview bmd intensity stretched in pal (a litttle bit), so a circle does not remain a circle, getting a egg. preview on computer monitor ok.
View 4 Replies
View Related
Apr 7, 2011
I have a 3d Drawing with very detailed light source descriptions. Is there any way I can measure a light intensity (in lux) in a specific point of my drawing?
View 0 Replies
View Related
Oct 23, 2012
I have tried multiple ways to have the intensity from our pointclouds show up inside Autocad 2013 with no success. I have tried multiple jobs exporting different formats from Cyclone 7.4. The file types I have tried are PTS, PTG, and PTX. All of these file read into AutoCad 2013 and create a Pointcloud. In AutoCad the pointcloud properties state that intensity values have been loaded, but when I attempt to view them the cloud stays white. I have also tried all the Shademode types in AutoCad. The intensity values from Cyclone appear between -1000 and +1000 values. The following is a list of steps I tried on multiple projects. Software Cyclone 7.4- AutoCad 2013 File types exported and imported PTS PTX PTG Shademodes Used All Standard Modes.
View 2 Replies
View Related
Dec 21, 2010
in an animation i need to increase and decrease a light's intensity by my audio.for example a violin's sound causes this about a spot light on violin player's head.
View 1 Replies
View Related
Aug 5, 2011
Is there any trick to increase the intensity of the "highlight" option of the crop tool?
View 1 Replies
View Related
Apr 3, 2012
Suppose you apply spiraling effect on the left edge of the figure (clockwise) and want to reproduce the same effect,but with the same intensity on the right side of the figure (reverse clockwise) so that both effects have symmetry.Clicking on the opposite edge of the picture and select the opposite direction (changing clockwise direction in the appropriate button) does not necessary mean that there will be the desired symmetry, once you can not determine how much pressure should be given to get exactly the same spirals intensity given to the left edge.
Is there any way to do it accurately? In what moment you should release mouse so that the number of turns is the same as previously established (left side)?
View 3 Replies
View Related
Apr 16, 2012
how can i have a result of neon effect. what material should i use and how high is my intensity factor for the light?
View 3 Replies
View Related
Mar 25, 2013
I'm having trouble getting the edges of my eyes to look like they are part of the chair, which got me wondering. Is there a way to feather my edges with increased intensity closer to the edge? To be specific, I'd like to start the feather 100px inside the border with 60% opacity, all the way to the edge (border) with 0% opacity. I tried doing this manually a couple of ways and it just didn't look uniform.
I have also tried with the eyes seperated (without the middle area), but I still have the same issues.
View 2 Replies
View Related
Jul 13, 2012
My Photoshop CS6 PSDs are getting flattened if opened by any previous versions of Photoshop, despite not being saved just opened. When I open the original in CS6 again, all layers are merged. Where there were 12 layers, there is now one. This is causing loads of problems.
View 11 Replies
View Related
Nov 20, 2007
I am losing functions in nearly every menu in photoshop. I have tried v.8 and v.10 with the same results... I have no access to nearly every effect menu, the select menu is almost as worthless and I can't do anything on it anymore. The only way to make the function useable is to open an old file that was made back when it was working. I tried reinstalling, after that didn't work it forced me to use a company version of CS3, which has the same problem.
Does anyone know what may be going on? I don't understand what file in my computer may be doing this... If anyone has had any similar problems, please post without hesitation. This is the second photoshop forum I tried, I hope photoshop team can help .
Here are two screenshots of what the effects menu looks like; sorry about the size, I have huge resolution and didn't think about reducing the image size:
I am running windows Vista Ultimate 64-bit and I am mainly trying to fix Photoshop v.8, but fixing this one will evidently fix v.10 as well.
View 3 Replies
View Related
Apr 13, 2008
I have same shortcut file for several years. The pattern is recent shortcut, always seem to disappear. They stick for a bit, between many lauchnes and quits of CS3, but then need to be re-added. I've done the delete preferences trick, I'm out of ideas.
View 3 Replies
View Related
Dec 6, 2007
I'm trying to break up sections of my website design, but when I copy and paste the various sections their edges become somewhat transparent.
Those edges shouldn't be soft because this is part of a larger solid image.
View 9 Replies
View Related
Feb 27, 2013
I am losing my levels adjustment when converting from PSD to any other format here is the list of it...
levels layer...........taking the contrast way up
saturation layer....saturation up
invert function
find edges layer
duplicate layer
background layer
At the point that I convert to jpg or another file type I lose the levels adjustment. Also flatten image or merge visible layers causes the same problem. I can supply a file if needed.
View 14 Replies
View Related
Jan 26, 2013
cs6 just started crashing. First you cannot see the image on a layer and then the program will crash.
View 1 Replies
View Related
Jun 25, 2013
I frequently create multiple paths on a single layer with the intention of applying a stroke to each of them at the same time. I typically lay out the paths roughly and then go in with the Direct Select tool to refine them before applying the stroke.
In previous versions, once I'd made the last adjustment I would click off the subpath I'd been editing and then right-click and choose Stroke Path, thereby applying the stroke to each of the paths. (If I don't deselect the last sub-path I was working on, the only option I get on right-click is to stroke that sub-path.)
In CC, once I click in a blank area to deselect the sub-path it also deselects the Layer (removes the highlight from the Layer in the Layer Panel), so most of my right-click options are greyed out. I have to move back over to the Layer Panel and reselect the Layer I want to apply the strokes on.
It's possible that my old approach is bad and I should feel bad, and this added step of having to re-highlight the Layer in the Layer Panel is the bestest thing ever, but I'd kind of like to be able to avoid that additional step. That is, I'm assuming that this is somehow a feature and not a bug.
If there's no way around having to reselect the Layer after deselecting the sub-path (or after clicking on a blank area with the Direct Select tool in general), in the alternative, is there at least a quick way to select all of the sub-paths at once without losing Layer focus?
View 3 Replies
View Related
