The bottom of the Layers Panel is hidden when my secondary monitor is on. I opened Systems Preferences > Display and adjusted scanning slider but I still can't make the PS screen smaller. What else can I do?
View 4 Repliessecondary monitor displays with colorshift in LR4.1rc2. this is on windows 7/64. Both my monitors i have are calibrated with spyder3, one is hardwarecalibrated eizo CG243, the other a HP2475 calibrated with spyder4 elite software. Colorshift shows same characteristics when i switch LR app window with secondary window. IT looks as if sRGB profile is applied to the secondary preview, because of the strong/overly saturated colors.
It seems to me a softwarebug, which makes secondary display inusable.
How is color management supposed to work in LR4?
Has Lightroom 4 addressed the problem of choosing which monitor to show your secondary display? I know this was a requested feature on LR3. How do you set it?
View 9 Replies View RelatedWindows 7 64. New Sager, Nvidia 675--up to date everything. Revit 2013 fresh download, very little else on new computer. All drivers and bios up to date.
Samsung monitor, same resolution on both main and secondary monitor.
I've heard of many who have had this issue particularly in the secondary monitor. Not sure what to do.
Essentially, wall jumps 3 to 5 feet when I click on it after it has been drawn. I don't seem to have the same issue if I run revit from the main monitor..
Have the same issue whether i run Revit from the Intel or Nvidia High Performance mode.
When I have a Primary and Secondary set on the timeline my boradcast monitor only displays the secondary unless I hav ethe big viewer up. I'd like to lock the output to the monitor to always be the primary output track regardless of player status.
Smoke 2013 Ext1
As of recently, all popup windows in Photoshop (i.e. colour picker, layer styles etc) appear in the middle of my monitor and cover the canvas i'm working on.
In the past, I would move this window over to the side and next time i open it, it would open in the last position.
This is no longer the case. Everytime it opens right in the center of the screen covering my artwork.
The same goes for layer styles. e.g. Stroke.
First the Layer Styles popup will cover my work.. i'll move it to one side
Then when I want to colour the stroke, the colour picker appears in the middle so I have to move this too.
I probably waste about an hour of my day just moving these popups out of the way.
The only thing I can think of is the fact that i've recently updated my graphics card driver (ATI Radeon HD 5700 Series) In Catalyst Control Centre, I hav ticked the option to keep dialogue windows in the correct place but this doesn't apply to the in-application popups.
I have 3 layers
TEXT
SHADOW
BG
the blending options are normal for TEXT and BG, but I have soft light for SHADOW. Now the BG layer actually contains an illustration which makes my shadow look realistic, however what Im trying to do is, save the picture with a transparent background with only TEXT and SHADOW showing, but as soon as I hide BG, the SHADOW layer will go back to the black color I drew and not look like a shadow. I tried merging text and shadow but either the TEXT gets soft light and gets ruined or SHADOW becomes normal and gets ruined. Its very late, ive been trying to figure it out for the past 4 hours so I hope I explained it clearly.
When I try to open a pdf with Illustrator (CS5.5), the panel that has you choose the options is hidden. I have to hit my enter key to progress forward,so it seems that the panel is still a step I am taking, but I cannot see it anywhere.
View 1 Replies View RelatedI would like to increase the font size in many text layers at a time by selecting them in the layers panel. The font increases, but the text boxes don't expand to fit the increased size text. So I am having to make each box bigger manually. Is there a way to have the boxes expand to fit bigger text automatically through the layers panel?
View 2 Replies View RelatedMy Publish Services panel is enabled and visible, but it is empty. All Publish Services are invisible. However, it seems they are still there, because from a photo I can "Goto Collection" and select the Published Collection that it's in. In grid view, this takes me to the screen where it shows me Published Photos, Modified Photos, etc. But I cannot create new Published Collections.
I am using Lightroom 5.2 64-bit on Windows 7. This problem only arose recently without any known trigger. I've had this problem before but it went away on it's own after I published from a different catalog.
1. Why do Illustrator, Fireworks and InDesign (these are the ones I have checked) open with floating panels, tabs and windows, even in full screen mode... but Photoshop opens nicely in windowed mode with all the panels, tabs and windows fixed?
2. In full screen mode the left ruler is hidden behind the tools panel?! Why?!
3. How can I have Ai, Fw and Id open like Ps opens?
I have Adobe Creative Cloud CS6 for Mac.
Is there a way to collapse all layers in the layers panel with one click?
View 1 Replies View RelatedI use auto-select primarily when designing. I will often clicking and dragging a marquee box to select multiple objects. I immediately noticed that it is now selecting hidden layers as well, where it didn't before.
Is there a setting or way to change this? I am assuming as of now that this is a new change. They will still select even if the layers are locked so locking groups is not a solution for this.
Using PSCS4 on XP.
I have a Photoshop document made by someone else that I am opening. There are 5 layers. 3 are hidden. When I hide all the layers, the image still appears on screen.
In the layers palette I see Unify: with 3 icons to click on and Propogate Frame 1 is checked. I don't believe I have ever seen this before in the layers pallete. Below I have an image of what is going on. Not sure if there is a way to set up a file like this when starting a new document or what, but this is what's happening; all layers hidden, but image appears.
I'm using the Photoshop CC in Windows8 64x as trial and find a curious bug with the Move Tool:Usually I select multiple layers creating a selection with the Move Tool on them, but in this new CC version the tool is selecting hidden layers too. More details: the hidden layer are inside a folder. The folder is hidden, but the inside layers are not.
This type of selection has always worked perfectly in previously versions, and of course, I leave the option "Auto Select> Layer" enabled.
i can't be the only one who thinks it's nuts that when 'auto-select > layers' is selected and i drag to select a bunch of layers, i also select layers that are turned off and/or locked, can i?i just confirmed that this IS not the case with CS6 -- locked or hidden layers are not selected upon dragging to select exposed layers.
is this a bug, or a bit of new functionality that i am failing to grasp? i did notice that in CC, on right-click there is the new option to "isolate layers", but this seems to just isolate & unclutter layers within the layers panel.
improve Photoshop CC, but this bug beaks my workflow to the point I can't use it.
Other than this critical bug, the software engineers behind Photoshop CC are doing a great job.
I currently working on a drawing which has previously been drawn by somebody else. I probably have 10 different layers within the drawing. However in my layer properties manager I have 37 all of which are turned on unlocked etc. When I try to purge theses layers are not deleted. Is there any reason why I can see theses layers and more importantly erase them?
View 5 Replies View RelatedIm having trouble with some of my drawings. i have imported a drawing from a college which was of as large size and although i have now deleted it and purge my drawing it seems to still be there as my drawing is 60mb yet only contains a few simple lines. is there anyway i can get rid of these hidden layers?
View 5 Replies View Relatedgive me the correct commands to use on a mac to merge all underlying layers to one layer at the top of the layers panel list. I know it in a mac but not on a mac as I just recently switched over.
View 1 Replies View RelatedI can only get one image at a time into the layers panel. If I go to ‘new layer’ it shows a chequered image only. How can I bring my other images into this panel?
I know it is probably elementary, but I’m just learning.
Both the Layers Panel and Adjustment Panel are in Expanded format when I Minimize CS4 to the Taskbar.
I then maximize CS4 and the Layers Panel does not show any layers. I have to double-click the Layers tab to reveal my layers. Never had this with CS3.
I am attempting to create a graphic using corel draw that has several different layers that can be viewed separately or simultaneously. Additionally the images in each layer are hyper linked to corresponding web pages. I am running into an issue because when I print to PDF I have several layers still active however hidden.
These hidden layers contain hyperlinks which are still showing up on the PDF even when those layers are not.
When hiding or showing a layer the main canvas is not refreshing.
If I hide the layer window then the canvas is refreshed.
So in order to hide a layer I click the eye icon, click in the canvas panel, hit Tab to refresh the canvas, and tab again to shop the layer window again.
I'm pretty sure this is not by design but I'm not sure whether there's a setting I've accidentally activated, or if it's a bug in Gimp or if it's a problem with the graphics set up on my machine (not having any other problems).
I'm using Gimp v 2.8.4 On fedora 17/Gnome 3
I've tried purging gimp from my system and reinstalling with out success!
More than a problem, this is a doubt. Well, I was working on an illustration, just trying things here and there, and so I have many different layers of elements, some of them I want show, and some of them not (I don't want to delete them though, cause they may be useful later). At some point I realized that when I saved the file and went to see the preview (space bar) in its folder, the image had both hidden and shown elements.
So this is my doubt: is this normal? is there a way to show the preview with only the shown elements? Of course, when I export the file to .png, for example, I get the picture I should get (without the hidden stuff).
I am new to PS CS5, when I create any vector shape using pen tool or rectangular tool etc the shape does not appear in my layers panel.
Is this normal behavior? If it is, how do i reselect a shape after I've made it?
I noticed my layers panel became closed every time I start Photoshop cs6. I tried to create new workspace with open panel but that's had no effect, panel is closed after the restart of Photoshop.
View 3 Replies View RelatedIs there a setting for the layers panel where you can set the maximum # layers or minimum that one can display on the layers panel. For some odd reason i can only set up 3 layers on the layers panel. Can you set up 8 or more layers(that become visible) on layers display. My lasso tool seems to be working normally now. etc.
View 3 Replies View Relatedhow to import new images into the layers panel. If I hit "create new layer" all I get is a blank layer. What I want to do is import an image from which I will cut out part of it and layer it onto another image. For example: lets's say I want to put an image of myself in front of a tree. I want to take the image of myself from one picture and layer it onto the picture which has the tree on it. How do I get both of those images into the same layers panel? I can get the picture of myself into the layers panel as layer #1, then I can cut myself out of the picture. My problem is, when I try to import the picture with the tree on it, it opens itself up in a new tab. If I try to hit "create new layer", only a blank layer apprears above my first layer. I have tried to drag the new image onto the layers panel, but it won't attach. All of the tutorials I have been able to find/watch, already have all of the images they are working with pre-loaded into the layers panel. I just need to know how to get my images into the panel, so that I can start to work with them.
View 3 Replies View RelatedThe layers panel stays grayed out and won't allow me to add any layers to the background.
I am new to Elements 12.
I have been using PSE 10 on this laptop for over a year, and PSE 7 for years. Today I opened a PSE file to carry on working on it, and the layers panel was blank, even though it has several layers. I opened a jpg and tried to create a new layer, and nothing shows up in the layers panel. I don't remember changing anything between last night and today. Is PSE corrupt?
View 2 Replies View Related