using PS 5 But I do a lot of printing onto paper that is not 8 1/2 x 11. So I go into Document Setup/ Print Setup and specify my paper size and all is well. But the next time I want to print the image I have to go in and do it all over again. Isn't there some way of making my print size stick?
View 2 RepliesEverytime I click on Print Setup in the print dialog box, the application crashes. This happens everytime, regardless of what printer I use.
View 1 Replies View RelatedBasically I have some business cards Im trying to print on a 8.5 x 11 sheet of paper. There are cutouts in the middle of the page for the cards so im trying to print them exactly inside the cutouts. I measured the sheet myself and I need a 12.70mm offset from the top and bottom of the sheet and a 19.05mm from the 2 sides to get my cards centered in unison with the page cutout. How do you set this up in photoshop? I have CS4 for Mac.
View 2 Replies View Relatedhave large format printer. I'm trying to set up a configuration for printing on rolls and not on sheets in page set up. But even if i try to make a new one the size doesn't work (61cm - 30,5m).
View 1 Replies View RelatedWhen attempting to press "page setup" in the print dialog window in cs3, the printer preferences dialog box disappears along with the print dialog window, and every time i bring the preference window back, as soon as i press any button in the window or click on any part of the window it disappears again. Why is this, and how can i stop this. My printer is an Epson 2200, my computer is a 64bit Vista.
View 1 Replies View RelatedI just got Elements 11 and it's not going well. The most severe bug is that if I click on Page Setup..., the print dialog becomes non-functional. Page Setup... and Print... buttons no longer do anything when clicked. The problem persists until I quit and relaunch Elements. Sometimes I can work around this by configuring everything in the Print window alone, but this prevents setting Elements options for custom paper sizes. I've already tried resetting Elements' preferences. All other apps, including the older version of Elements I had, print without problem.
MacOS 10.6.8
Adobe Editor 11.0
Brother HL-2170W 4.5.0
Canon PRO-100 10.66.0.0
Console:
Craploads of __NSAutoreleaseNoPool leak warnings
*** Assertion failure in -[PSCocoaMenu itemAtIndex:], /SourceCache/AppKit/AppKit-1038.36/Menus.subproj/NSMenu.m:779
Having solved my problem of printing multiple copies, I now canot print at all. Page setup and print command are grayed out. Printer works in light room and pages. OS xLion epson R3000 Elements 11 Trial version.
View 1 Replies View RelatedWhen I attempt to access "page setup" the button just changes color to blue as I click it. I cannot select the media. The printer works fine from Preview but not from CS5. Epson says it's a Photoshop problem.
View 6 Replies View RelatedI have a printer A0 format and i want to print picture A0 size on it. But when I try to setup the "Page Setup" only A4 is possible.
How to setup to print A0 to A0 in scale 1:1?
I have created a bunch of Page Setups (for both Paper and PDF) that work great when plotting from the plot menu. Lately, I've convinced my people to start using the sheet set manager and the publish command. However, on some computers, (not mine) plotting (to PDF) from the Publish dialog box outputs a file that seems to ignore the page setup. Using the very same Page Setup, the file comes out perfectly when plotting from the regular Plot menu. I don't understand how:
1- I get the same result with both methods on my computer (the one used to create all those page setups);
2- I get page setup to apply perfectly on my computer;
3- I get the expected result on the problematic computers when using Plot;
4- But I get different results on the problematic computer when using Publish.
*Note: In the publish dialog box, I use "Publish to: Plotter named in page setup" and then I select the wanted page setup for all my selected layouts in the list. My page setups are using "DWG to PDF.pc3", so the "plotter named in page setup" in all cases should be "DWG to PDF".
I've been doing tests with PDF files set on A1 format (841mmX594mm) and the output is perfect on my computer. Then on another computer, strangely, I get a PDF with these dimensions: 863.6mmX558.8mm (34"x22"). On the second computer, doing the very same steps, I get 431.8mmX279.4mm (17"x11"). Three computers, three different outputs with three different values. One works, two miss. I'm stoked.
Keep in mind that all three computers output perfect files when using the standard plotting menu (using the same page setups) so I doubt the page setups are incorrect. Does the Publish command deal differently with page setups than the plot command ? I would have assumed that both commands would react the same. I 'd like my team to be able to batch plot like I can on my computer.
I have a list of drawings which i want to batch plot using dwg to png plotter. I want the page setup file to use sun high res, plot scale fit to paper, plot area extents, plot offset center the plot for the model space
When in batch plot, the page setup shows default, however this is not my pagesetup settings as it shows default none, how do i make it see the page setup i want?
Okay, so I have about 25 layouts on this particular drawing that already have a default page setup assigned to them. I just created a new page setup and want to apply it to these layouts...but I cannot. I can select the right setup in the publish window but it does not stay current after publishing.
The problem also comes up if I do a "-purge" or wblock the entire drawing as to remove weird elements. The pagesetups then show as missing.
If I create a new drawing and setup the page setup for the first time AutoCAD will ask if I would like to apply to all layouts. Where is this option for existing drawings?
I used to use a really nice VBA routine for assigning a page setup to multiple layouts, but now I need something that will work for 2011 and up.
View 1 Replies View RelatedI get several dwg's a day with up to 40 layouts in each one. All the settings are correct ACCEPT the plotter. Is there a way to set all page setups for all layouts at the same time? Something like select all layouts and do a page setup for all. Possibly with LISP or VBA?
View 5 Replies View RelatedI use Sheet Set Manager to create and output sheets. Typically I will setup the pages to 24x36 and set to output to our HP.
If I want to output to 11x17 pdf, I use a page setup override and it works fine.
What I would like to be able to do is add a watermark -- using transparent text -- that says "Not to Scale" across the print when I use the page setup override.
I have a set of Lightroom Print templates that I am trying to use, that are all for a 4x6 print. I can't get it to work because my page setup in the print module defaults to letter size. When I go in and change the page setup, it messes up the template and it gets all jumbled. Then when I go on to the next template, it switches back to letter size again. I want to create and hold a 4x6 canvas so these templates can either be saved to a 4x6 .jpg or printed on 4x6 paper. I know I can save a printer and page layout as part of a template by clicking the "update settings" once I have it all as i want it, but I can't even get that far because it messes up the template as soon as I change the page settings to 4x6. How do I get the canvas to 4x6 on templates that are already created so I can save them as a 4x6 .jpg or print to 4x6 paper?
I even just installed a printer that only prints 4x6 to see, but again, when I change the page layout it completely messes up the template.
When trying to print in Elements 11, after clicking "Print/Page Setup/Presets/Show Presets", the box freezes. Clicking Cancel or OK does not work. I then have to Force Quit Elements to clear it. Apple say that it is a problem with Elements. Using the same procedure in other applications, clicking Cancel or OK does work.
View 8 Replies View RelatedIn our drawing office we use Inventor in a mining materials handling environment. Our output is mainly structural drawings where we require a bill of materials as part of creating a drawing. Whenever I insert a BOM in the drawing environment I get this table which is labeled in a foreign language (it looks like an Eastern European language) and the format is not as per the standard Autodesk installation setup.
How do I either revert back to the standard setup or do a BOM setup from scratch?
We use IV 2013 Professional on Windows 7 64 bit.
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
Is there an easy way to level out a horizon? PaintSHop Pro has a feature where you put a line on something in your photo that is slanted b crops it) accordingly. I seem to remember PS has this feature--but I can't find it.
View 6 Replies View RelatedWorking in raw, I have made changes to exposurre etc. when I save to jpeg they go lighter. I have looked in the colour settings which are set the same as the camera at sRGB but not sure if I a missing something.
I have recently upgraded from CS4 to CS6, wasn't a problem in CS4, I have looked at the settings in both to try to get them the same but nothing is working.
Here in the office we have CS4, CS5, and CS6. CS4 and CS6 work fine but in CS5, If we set an image resolution then crop the image it will not keep the resolution we set.
We have tried the resample image on and off. We have tried it with and without a background and nothing seems to work. Is there is special setting in CS5? As I said no issues with 4 & 6.
I use rectangle marquee to do this. Only thing, --unlike the crop tool--if has no handles if you don't drag perfectly on the first crack.
Is there a way (crop tool?) -- to keep no uprez or downrez, but just crop and get handles?
i have a png picture with no ground 256 x 256
i tried to make dimensions 16x16 and keeping the bg transparent with ImageReady, and did save optimized as > then saved it png but the resolution was very bad, and the background was white not transparent.
any suggesstions?
This is an interesting question. As most of your probably know, Filebrowser is kind of an app with an app. You can open a RAW camera file and set all the parameters for conversion, then update the file without opening it by choosing the alt (PC) or option (Mac) key. This changes the convert box to update.
A friend of mine, also a photographer, applied color corrections to an entire wedding using Filebrowser and updating his RAW files. He then burned a DVD of the RAW files and sent it to his lab. They converted his files and posted a web gallery. He then noticed that the files were horrible! All the conversion settings were not retained with the RAW files.
I have always assumed that any updated conversion information was stored in the EXIF information of the RAW file. Now I'm beginning to wonder if it's stored in the Filebrowser cache or meta information. If this is the case, then which files need to be kept with the RAW files when you transfer them to another computer? Can this be accomplished?
I want to backup my "Photoshop Elements 3.0" Settings and "My Catalog".....
I am using Windows XP SP2.......
But what I don't want to do is to copy my all photographs (which are in the organizer and tagged and are about 7 GB in Size) to removable media..........As I have them on a separate Drive and they are Safe......
which Files do I have to save to Keep my existing settings.......in my new windows........
I'm a programmer and used to using version control software for storing source code. The version control software running on a server is used to keep tracking of every single change (history) that is done to files, provides a repository for multiple users to work from and someways a backup.
View 9 Replies View RelatedI have a large number of sporting photos (both RAW and JPG versions) that need to be cropped to zoom in on player and eventually saved as JPEGs on CD, that can later be printed as 8 X10's by player parents.
When I crop the jpeg (setting 8 X 10 and resolution not filled in) I get a resolution around 150 , too low for printing. I know if I fill in resolution too , PS will use Resample Image and but I will get a somewhat degraded picture at 8 X 10.
Is there a way to use the RAW version of the photos, (since they are not compressed), be able to crop and still save at a printable resolution, without using Resample.
when you do a FILE > OPEN and the image comes up, it is contained in the DOCUMENT WINDOW, no?
I noticed that if you press CTRL and + you zoom in, and CTL and - then you zoom out. But the document window seems to ignore the palettes on the right hand side of the application.
Is there any way to make Photoshop not extend the document window so that it resides partially behind the palettes?
I notice that if you press CTRL + ALT and + then you zoom in WITHOUT modifying your document window (same for CTRL + ALT and -) , but I cannot see how to remap CTRL and + to what CTRL+ALT and + does.
This is most likely a stupid question but it has had me stumped for a while... Every time I close an image the eyedropper tool pops back to the top. What do I have to do to keep the measure tool on top?
View 1 Replies View RelatedUsing CS4, I want to keep a logo (rasterized) with its caption (text) on the SAME LAYER.... I know I can LINK the 2 layers, so if one moves the other moves too, but how do I combine them without rasterizing the text?
View 12 Replies View Related