I did nothing with my computer but remove my little 512MB of RAM and install 2GBs. PS3 (yeah...a real early version) suddenly disappeared. I attempted to reinstall it but it will not install. I use PS3 most of the time because I am an old geezer and it is easy to use for what I use it for, But being very curious...why would it work on 512MB and not 2GB?
(I have Win XP home edition)
Windows 7 64bit
Inventor 2010
Visual Studio Professional 2010
I have an Addin with several pieces of functionality that I have been working on for over a year now and have had no problems with it loading. Yesterday I was working on a bug in a function and when I set a break point it was not breaking in the correct location. Possably some miss match between the source and .pdb files. I tried a clean build but still could not get the break point to be correctly aligned with my source code.
I tried to unregister and re-register the Addin with regasm but no luck. I then decided to search the registry for the name of my Addin and was supprized to find thousnads of registry entries. I then decided to clean my registry of all occurances of the Addin name. After removing all occurances of my Addin from the registry my Addin would not load.
I tried putting a message box in the first line of the Activate sub but it never executes. I made the assumption that it was a problem with the registry and changed the GUID value. When I did a rebuild I got the following error:
Error 1 The "UnregisterAssembly" task failed unexpectedly.
System.Runtime.InteropServices.COMException (0x80030002): could not be found. (Exception from HRESULT: 0x80030002 (STG_E_FILENOTFOUND))
at Microsoft.Build.Tasks.NativeMethods.UnregisterTypeLib(Guid& guid, Int16 wMajorVerNum, Int16 wMinorVerNum, Int32 lcid, SYSKIND syskind)
at Microsoft.Build.Tasks.UnregisterAssembly.Unregister(String assemblyPath, String typeLibPath)
at Microsoft.Build.Tasks.UnregisterAssembly.Execute()
at Microsoft.Build.Framework.ITask.Execute()
at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExecutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost taskHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskResult) AnthroAddIn
I ran the build again and did not get the error.This Addin is loaded on every CAD workstation in the company using an install program written with the Inno Setup Compiler. I installed the Addin using the installer and the Addin still will not load on my machine.
What is the best approch to debugging an Addin that will not load?When is it necessary to re-register your Addin using regasm?Is it possable that this problem is being caused a problem with the registry?I have read a number of posts regarding problems with Addin's not loading but have not found anything simmilar to this.
I created this effect in photoshop cs2 awhile ago and cannot remember how I did it. Does somebody know how to create this effect?
View 7 Replies View RelatedEvery time I apply a style to a shape or text all of the styles options and effects seem to be increased, the shadow will be longer, the stroke will be bigger, etc.
View 3 Replies View RelatedI have recently got a new PC soley for photoshop and am eagley awaiting delivery of my copy of CS 3 to turn up, however this will be used to artwork photos for in a commercial portrait studio, due to nature of our work i am finding that previous copies are running a little bit slow and are really delaying our studio progess. Unfortunatly we are a very small team and currently don't have an IT expert to hand.
I have been doing my research and have read that better performance can be achieved by designating your scratch disks to different drives, again unfortunatly i only have 1 drive in this machine, i was wondering if i was to partition the hard drive into 4 sections would this increase the performance or not, and ifso what would be the best type of partitioning to use, i.e FAT/FAT32/NTFS/or any of the other types?
I would like Abobe to create a patch for this problem affecting so many of us. The menu's font size cannot be adjusted in PSE. It is a HUGE problem for me. I cannot return the product, I lose money, but I am unable to continue with using it. I do not understand why Adobe keeps ignoring this problem. PSE would be a great product - only if Adobe listened to customer input. I am forced to think that Adobe simply does not care enough about its customers, especially not about the older population with presbiopia.
View 2 Replies View RelatedI'm having multiple issues with Photoshop CC. I just installed it yesterday and all went well. I began working on a project and discovered that the bracket keys no longer increased the brush size, but instead jumped from one brush to another. The following day I tried to open the app and got a blank white window and a spinning beach ball. It won't start.
View 1 Replies View Relatedmy animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies View RelatedI'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.
We are working on a DWG file. Its a project my friend started and is of a house. She now started to bring in furniture from external files. Now her original DWG file is really big. Even if she deletes the furniture she brought in from external files, the original file is still bigger than it was.
I asked her if she could just copy the original 3D house to a new file. She said in a later version of AutoCad, she could just create BOX and save the objects to a new file, but she isn't sure how to do this in AutoCad 2012.
In Short: Is there a way to save her project? She can't even work on it now because the file is so big.
I have an icon I want to add text and another icon to...
so I incresed the canvas size the existing icon has a stronger checkered background than the "new area...
and: I cannot do (except for pasting another image) anything with the weakly checkered area??
do I need to add transparent background first for the new area?
I wrote a little Script converting an Array of Strings to outlines for SVG export. I however find the results of createOutline() extremely unsatisfactory, especially when compared to the results of doing the job "manually" (Right click > create outlines).
Right click, "Create Outlines"
createOutline() from Script
From first sight this seems like an issue with conversion accuracy set too low, however I wasn't able to locate a parameter to change the same.
How to achieve the look of the top image from within a script.
my .oam files getting bigger...i had a little animation that was 1.9mb and 1 month later i make the same animation and i' m getting a 2,9mb file.Not much, but this .oam file is part of a website...so size das matter..
Is there a way, to get smaller sizes? the files are alrready based on the animation size..the animation is 960x320pixels..and i made the pictures 100% based on that measurements..
I am doing a small drawing with bolts and nuts. I wish to show the centerline visible, but with CENTER2, and selecting the line for Property, I changed the Linetype scale to .25. However, the actual line on the drawing doesn't show a centerline but a continuous line. See, figures below. I wonder if the gaps between the small dash and the long lines can be increased.
View 4 Replies View RelatedI do not mean "how do i use the scale tool?!" I have an xcf file that is 925X250 and it needs to be 925X450. If cropping removes specified parts of an image, how to I make it bigger, like in paint where you can just drag the edges out or go to image properties.
View 2 Replies View RelatedI am working on a quite large file. It was all of the time around 68 MB. Now at once it is 570 MB in size. I linked all images (less than 380 MB) externally. What is the reason for that?
View 6 Replies View RelatedThe multileader arrow is not showing even if the number is increased (ie from "4" to "10") in the multileader dialog box or under the properties when modified.
View 2 Replies View RelatedDidn't their use to be a control for how PLines showed up at intersections when you increased the width? I can't remember where it was (dialog box, options, sys-var)?
View 5 Replies View RelatedI am creating a slider for a site's Home Page, and specified a Stage size of 960 x 255 pixels in my Edge Animate document. When I inserted the .oam file from Dreamweaver (Insert > Media), the dimensions grew to 980 x 275 pixels. Manually correcting the dimensions does not correct the problem. The width remains wider, and a gap exists between the bottom edge of my animate object and the border graphic that overlays the object.
How do I correctly specify the stage size so it remains at the size I specify once I insert the .oam file in my page?
How to lose timeline backwards with increased speed?
View 1 Replies View RelatedI'm trying the trial version of Photoshop CS6, and I'm wondering whether or not it's possible to change the length of a shape with the amount of text entered into it, with the text still being editable? For example, if I had typed in 'hello', the size of the shape should be just big enough for the text to fit inside, without me having to change anything. On the other hand, if I typed in 'good morning', would I be able to make it so the size of the shape would change for the text to fit without having to use the transform tool?
I'm trying to make annotations for a video, and it would be annoying to have to transform to the correct measurements every single time.
Lightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?
View 2 Replies View Relatedi have downloaded Photoshop 6.0 but I can't work with it because the program is stopped with an error
View 1 Replies View RelatedAnd before you say "It's because it's 14 years old", know that it was working perfectly until about two months ago.
I have a Windows 7 laptop with 4GB memory, plenty of HD space, and no other PC issues.
My Photoshop CS4 and CS5 shows "Photoshop has stopped working" . Whereas I have Windows 7 64bit, 6GB RAM, 512MB Graphics Card.
Earlier I worked in this version. But after formating my conputer I could not do anything with only in Photoshop. First I installed Photoshop CS4 it was failed to work then install Photoshop CS5..It also failed to work.
I updated Photoshop CC about 7 days ago. Before that it worked fine, since then I have been using Photoshop CS6 for some work (CC left it there when it installed) but yesterday I wanted to go to Photoshop CC from Lightroom 5.2 and Photoshop CC hung. Rebooted computer and tried to open Photoshop CC but it crashes on initialization.
As interim measure I installed PS CS6 as an optional external editor in Lightroom, but I would like to use Photoshop CC again one day!
Yesterday, I tried to start up Photoshop, but it got halfway through initializing and stopped, flashing a message: "Adobe Photoshop CS5.1 has stopped working." I shut down the computer and tried again, but it repeated three or four times.
So I uninstalled the program. Upon reinstallation, installation failed and the computer said: "Your installation encountered errors. Please try restarting your system and installing again. Exit Code: 20."
I have been using my program since June without issue. Suddenly it stopped working. I can open the program but it will not create a new file or open an existing file. If I "open with" from windows explorer it won't open either. I have uninstalled and reinstalled the program and I'm still not having any luck.
View 1 Replies View RelatedI have been running Photoshop CS2 on my computer for about a month now, the full version, activated and registered. For some reason whenever I open a file, Photoshop stops responding; all it does is make a sound ("dun") sound whenever I click on the Photoshop window. The only button that works is the minimize button; I have to use Windows Task Manager to close the program.
Does anyone have any ideas what's going on and how I can fix this?
Ive upgraded my pc to get better performance out of cs4 that Ive been using for about a month now, e8500 cpu Asus P5Q Pro m/b 4Gb ramm and Gigabyte ati radeon 4650 1 Gb Graphics card, keep getting error message cs4 had to close, I suspect its a conflict with new graphics card. Ive down loaded cs4 update and card has latest driver.
View 5 Replies View RelatedI get an error message from windows vista premiumm home.
It just says: Adobe Photoshop CS3 has stopped working correctly. Windows will close the program and notify you if a solution is available. The only option is a box that says "close program". Once you close it everything goes away. It doesn't even give you a hint of what the problem could be. I installed creative suite 3 web premium on this brand new computer about 2 weeks ago. This is a first time install of this software, but when I called Adobe they said they don't offer free installation help anymore on cs3 because cs4 is out now. Anyone have a clue what I should do? I can't just uninstall photoshop, if I try it wants to uninstall all 8 programs.