I am trying to make a large poster for the banner thats on top of a shop on Photoshop cs6 i have the dimension in meters and centimeters and im just wondering if i put these in correctly, will this sure be the right size i need? because it is a little bit too big and i don't want no printing issues to happen.
i am running adobe Photoshop cs6 on a macbook pro, 2.53 ghz intel core 2 duo 4 gb ram mountain x lion
An image dimension to a specific size and extruded to a specific height with an empty cylinder through the middle for the wristband to pass through. All edges need to be rounded off somewhat so they are not sharp on the skin.
The face of the bead needs to be an exact cutout of an image that I have. I've used Photoshop to take the image and remove the background, so I have a .PNG with the background removed. I need to import this into AutoCAD and make this image into the face of the bead.
Is there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies View RelatedWhen I make a print from CS6 the image on paper is narrower than the stated dimension in the program. The height of the image is faithfully reproduced. I know that there must be a preference setting to correct this but I can't remember which one it is.
View 8 Replies View Related1. I want to draw boxes of specific dimensions, i.e., 5"x7" within a canvass that is bigger (i.e., letterhead size) than that.
2. I also want to know what size a specific image is. I checked help (PS7) and it says if I press alt and right click on the image information (which I assume is the size dimensions shown on the status bar) it will give me the image size; but it only gives me the canvass size. Am I doing something wrong?
3. Not sure if this is the place to ask, but can anyone tell me where to go to learn how to create emoticons?
Why the dimension is this big? My draw is in mm. I tried to change the dim scale but no success.
dim.jpg
I am shooting in RAW, then converting to DNG and the dimension of my photos is 3872 x 2592 (I guess thats always the same?)
Now I need to have a picture dimension of 3500px x 3500px and one 4600px x 3000px. How do I get there?
I assume resizing the photo in the export feature to that dimension is gonna decrease the quality?
i currently have a logo that is 460X440 pixels and 12.17cmsX11.69cms and the resolution is 96 pixels per inch.
i am wanting to change it into a 2cm X 2cm avatar that is less than 6K in size,
how do i do this? everything i try makes the output file about 24k in size.
the reason i am doing this is the forum i regularly post on has a max avatar size of 6k.
I am trying to figure out how to put some text (TYP.) on the other side of the dimension size. IE: my dimension is 4.00 inches and I want to be able to put TYP (for typical all other parts like this) under the 4.00. I'm sure it is easy -
View 8 Replies View RelatedI am in inventor and I need to draft up some diagrams for a lab report for school. They all have to be to scale so my dimensions will work properly, the only problem is, when I want to take a screenshot of the image to put into my document, the dimensions are way too **** small. I have tried everything to change them and nothing has worked. I don't know where my command line window is so I can't go directly to dimstyles.
View 3 Replies View RelatedRevit 2010.I'm trying to change the temp dimension size. (Can read the 8pt.?) I've looked at the .ini file and don't see where I can change it. I've also read where it can be changed via some 'option'. Under which tab and panel is the 'option'?
View 5 Replies View RelatedI am using annotative dimensions and when I use normal dimensions the text comes out correct at 3/32" but when I use aligned dimensions the text height is 1/8". How do I fix this?
View 5 Replies View RelatedWhenever I try to dimension a drawing in model space the text of the dimension comes out unreadably small.
I go into dimension style manager, I click on modify and I click on the text tab but the text height and fraction height scale is greyed out!
If I click on "new" dimension style the only option I get is to base it off my current dimension style with the text size greyed out again.
How to change the text size of dimensions if at the option is greyed out?
Why are annotative dimension always placed in model space to the created height regardless of the annotation scale I use. using annotation 1:1 or 1:10 or 1:50 my dimension is always inserted to the dimstyle hight of 3.5mm (about 1/8") and not 3.5 x annoscale example 10 = 35mm.
When dimensions are placed using an anno scale of 1:1 and than change the anno scale to 1:10 the dimensions and dim arrows ect are scaled to the correct size 10x value preset in the dimsyle. My text style is non associative and set to 0.0 height.
The only way i can place dimensions to the preferred height is linked to the anno scale is by setting the text style height 3.5 (about 1/8"). but the problem here is that the dim text height will be displayed to selected annotation scale of 1:10 but the dim arrows etx are not to size. I know that setting the text style hight is not the correct way and see why.
All my dimension styles are annotative and and have the ANNOAUTOSCALE set to 1. I have also tried by presetting the object anno scale to the preferred annotations.
I am still stuck with dimension size in LR4. If I would like to crop a picture to a certain dimension.
I need to have my pictures cropped to 4600 x 3000 - so what I am doing is I enter the dimension in custom ratio, then in export I choose image file and enter 4600 x 3000 in dimension size. and then - my picture turns out with 4600 x 2990?
I have managed to get the right size before but for the love of god I can just not remember what I did different then..
1. How do I connect, collapse and disconnect windows (tool bar, property manager, etc.)? They get stuck together and I can't unstick them.
2. What's the difference between canvas size and image size?
3. Which tools are only for web design (i.e. tools I can ignore if I'm not doing that)?
4. What's the subselection tool do?
For Photoshop:
1.Why is the original layer always locked?
2. Whats the name of the property inspector in PS? And is it called inspector or manager in FW?
I'm using Photoshop 7. I create a new document 8.5 x 11 inches at 150 pixels per inch.
I draw a circle 1" from the top of the image. The circle is 3" in radius.
When I print the circle is nearly .25" smaller in radius and slightly less than 1" from the top.
Why is the output not in the same placement and proportions as the image on the screen?
Is there any way to change the size of dimension text in sketch? My students cannot see the dimension when I demonstrate the sketch.
View 9 Replies View RelatedIs there any way to set that 'edit dimension' window/box in the sketch environment so that it opens to the length of the parameter being used? All my models for our library items are entirely controlled by Excel sheets and the names of the parameters are often quite lengthy. It's very annoying to have to drag the edit dimension box wider each time and push home or end to see everything.
View 4 Replies View RelatedI have an assembly that I would like to show dimensions on an isometric view. I am able to create the dimension, no problem. Issue I'm having is that when placed on a standard lettersize page, the dimensions are too hard to read. I've tried editing the size by double clicking the dimension & editing the font. It doesn't seem to make a difference what font size I enter, the size remains the same. How can I change the text size on isometric dimensions?
View 2 Replies View RelatedI have been working on some spec sheets and, ideally, would like the text size larger to improve readability. When creating text, changing the size is as easy as editing the text and changing the size. With a dimension, however, that method doesn't work. Is there an easy way to change a dimension's text size without having to make a change in the styles??
View 2 Replies View RelatedI'm currently working on a floor plan and I have my drawing completed, but... my drawing scale factor is 48 and my dimensions are too small to read. plus, my hidden lines are not "dashed" like they should be. my linetype scale is supposed to be set at 24.
View 3 Replies View RelatedI am trying to dimension a drawing and have tried everything under the sun to change the text size but despite everything it keeps producing the text at a tiny size .
View 3 Replies View RelatedWhen a Basic Tolerance is used to dimension - can the size of the containing box be adjusted?
I understand this is set as a percentage of the text size - where is this value & can it be edited?
I am having trouble changing the dimension text size of any 2d or 3d sketch..
the default has changed for some reason (i might have accidentally changed it while looking for something the other day) but i need to know how to change it back.. I can't do anything without a dimension getting in the way!
How do you change the dimension text size in an .idw 2D drawing? The dimension text and arrowhead size is too small and I would like to make it sligthly larger.
View 3 Replies View RelatedI have the fill color turned on in my dimension style to background. I want to adjust the "masking" box size. Just as you are able to in the text edit-background mask. I believe the default must be 1.25 larger than the text. I would like it to be 1.00. Is this possible? You can adjust the text background mask size, but not the dimension mask size.
View 8 Replies View RelatedWhen I change a dimension in one viewport the alphabetical text size in another viewport enlarges automatically (not the numerals) yet when I look at the properties it still says the right size. How can I stop this from happening?
View 7 Replies View RelatedHow do I change the dimension size in sketch mode?
View 4 Replies View RelatedI there any way to set the dimension break size in autolisp ?
View 1 Replies View RelatedI am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.
View 1 Replies View Related