AutoCAD Visual LISP / AutoLISP :: How To Set Dimension Break Size
May 17, 2013I there any way to set the dimension break size in autolisp ?
View 1 Replies
ADVERTISEMENT
AutoCAD Visual LISP / AutoLISP :: How To Set Dim Break Size
Mar 16, 2007How to set the dimbreak size for their dimstyles (I'm sure it can be tweaked a bit... but works ok as is):
(defun SetDimBreak (DimstyleName Value / ds edata xdata newxdata i ent)
(if
(and
(tblsearch "dimstyle" DimstyleName)
(setq ds
(vlax-vla-object->ename
(vla-item (vla-get-dimstyles
(vla-get-activedocument (vlax-get-acad-object))
[Code]....
AutoCAD Visual LISP / AutoLISP :: Dimstyle Break Size Variable?
Aug 28, 2009I want to set the break size in all of my dimstyles but I can't find a system variable for it. know what it is or how else to set it?
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Break To Break At Point Command
Mar 19, 2010Is it possible to change te Break command permanently in the Break at Point command?I never use break, only break at point.
Changing te macro for break ^C^C_break to the macro for break at point ^C^C_break \_f @ doesn't work.
To do it manualy at the command prompt takes to much keyboard entries and mouse clicking.
AutoCAD Visual LISP / AutoLISP :: How To Make Selection Set After Break Command
Nov 19, 2011The following function
(command "_break" ent1 p1 p2)
break a polyline into two separate polylines. How can I get a selection set with two separate polylines?
AutoCAD Visual LISP / AutoLISP :: Repeating Break At Single Point
Nov 7, 2011I'm creating the following macro:- (defun C:BK () (command "_BREAK" PAUSE "_F" PAUSE "@" )(princ)) to add to a shortcut key lisp file and then I want it to repeat... How do I make it repeat?
I want it to do the same as this:- *^C^C_break \_f @ but as a shortcut key in a lisp format.
AutoCAD Visual LISP / AutoLISP :: Break Lines Horizontally And Vertically
May 14, 2013a routine that has the option to break vertical or break horizontal, depending on the option, the lines that cross either the horizontal or vertical (again, depending on the option) a specified distance (say .05) on either side of the line you wanted to keep. So if I choose BREAKH, the vertical lines that I choose would break any horizontal lines that cross them. Same applies to BREAKV. Hopefully I communicated clearly enough.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Continuous Dimension Lisp That Alternate Its Position
Jul 12, 2012Is there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high? If there is no lisp already created, how to create one?
See Continuous dimension attachment for example.
I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.
AutoCAD Visual LISP / AutoLISP :: Overriding A Dimension Value?
Jun 11, 2002I am wondering how I can override a dimension value through AutoLISP. Is there a command line that I can use so that the pop up window won't show up?
View 7 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Changing Text In A Dimension
Oct 15, 2012I want to override the measurement in a dimension with a string of text using a LISP command.
E.g.. "select dimension"
type new text for dimension
replace dimension measurement with new text. I can get the entity and its values, buy not sure which value to change for the "text override".
BTW Acad 2012.
AutoCAD Visual LISP / AutoLISP :: Draw Rectangle Dimension?
Apr 17, 2013how I would go about writing a function that would calculate the length of a diagonal of a rectangle using SQRT function? I've been trying but so far nothing!
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Select Last Created Dimension?
Apr 10, 2012I have the following code, that for some reason the last created dimension is no being selected. That's the first problem. The second (and not as improtant) problem( becasue it does work), is that I'm using the "dimedit" command. I prefer to do a swap within the dxf codes, that I treid but didn't work, so I resorted to the "dimedit" command.
(command "DIMLINEAR" pause pause pause)
(setq last_dim (entsel (entlast)))
(setq oldunits (getvar "lunits")) (setq oldprec (getvar "luprec"))
[Code].....
AutoCAD Visual LISP / AutoLISP :: Dimension Styles Colors
Aug 13, 2012Is there any way to change the colors of the dimensions styles, including dimension lines, extension lines and text to "by layer"
I found a code to change the colors, but only affects the current dimensions in the drawing and the styles do not change.
AutoCAD Visual LISP / AutoLISP :: Get Coordinates For Dimension Arrowheads?
Jul 14, 2012I'm writing function which will facilitate user to offset dimension. After enter command, he select dimension and select point near one of dimension's arrowheads. Then I'm calculating new XLinePoint1 or XLinePoint2 and replacing original.
I have everything done. I thought ... The problem is when user firstly create AlignedDimension and after that he create RotatedDimension by using continous function. After that XLinePoint1 and XLinePoint2 are not parallel to the DimLinePoint (look at image).
How can I get coordinates of points selected in red rectangles?
I know that one is specified as "dimension line defining point" but what about second? How can I get its coordinates? Or maybe there is other way to get this point?
AutoCAD Visual LISP / AutoLISP :: How To Dimension Between Two Points In A Selection Set
Nov 1, 2011Looking to make a selection set of points that are on a specific layer, and then create a dimension between, in this case, two points. I feel like it should be very simple, but I can't get it to work for the life of me. Here is the test code I've been playing around with:
(defun c:test (/ sel1 TC)
(setq sel1 (ssget "X" '((8 . "VPOINTS"))))
(setq TC (polar (entget (assoc 10 (ssname sel1 0))) (dtr 180.0) 9))
(command "DIMLINEAR" (entget (assoc 10 (ssname sel1 0))) (entget (assoc 10 (ssname sel1 1))) "V" (polar TC (dtr 180.0) 9) "")
[code].......
AutoCAD Visual LISP / AutoLISP :: Set Dimension Style To Annotative Off?
Nov 8, 2013I am trying to create a lisp routine, that will check the dimension style "standard" to see if its annotative. If it is, I need it to turn annotative to off.
ITO - Application Management
Factory Design Suite Ultimate 2012
AutoCAD 2012 | Inventor Professional 2012 | Vault Professional 2012
AutoCAD Visual LISP / AutoLISP :: Dimension Color By Layer
Oct 20, 2011As a consultant we grey out architectural backgrounds for our sheets. We use the SetByLayer command to change the color of the objects in our sheets to gery out. The issue is with dimsensions. Dimension Line Color, Extension Line Color, and Text Color are all set at By Block as default and no one ever bothers to change it unless they are setting it to a specific color which is even more of a problem for us. You can edit the properties of an existing dimension and set Dim Line Color, Ext Line Color, and Text Color to by layer, I am looking for a way to automate this. Something that can search through a drawing, grab all the dimensions (even in blocks) and set everything by layer.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Line Length To Dimension Override?
Sep 23, 2011My goal is to be able to select a line and a dimension and then have the line's length appear as the text override for the dimension. I have the code to substitute the variable "dist" for the dimension text:
(setq dimselected (entsel "
Select Dimension:"))
(setq newlength dist)
(command "dimedit" "n" newlength dimselected "")
but am having problems extracting the line's length to the variable and setting setting it equal to the variable. To make things more interesting, the value needs to be in inches with fractional inches accurate to 1/16".
AutoCAD Visual LISP / AutoLISP :: Additional Counter For Layer Dimension
Aug 22, 2011if my attach lisp can add sort of counter that how many dimensions, leader and multileaders have been move to layer "dimension"...
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Any Way To Extract All Dimension Text At End Into Excel
Aug 16, 2012I'm dimensioning an old drawing with the real (measured) dimensions and with the drawing dimensions in brackets (using ' 1500 (<>)' to give '1500 (1505)' for example.
What I'd like is to also be able to put on the difference between the length I type in and the length in brackets - as this would let me see any really glaring errors that can't be attributed to user-error on the laser measure.So I could type in '1500 (<>) (X)' where X is the formula, and get ' 1500 (1505) (5)' back?
How to be able to run a script that could highlight any dimensions where the number is brackets and the typed number have a a difference of, say, 50.Or failing that, any way to extract all the dimension text at the end into excel so I can see the differences myself?
AutoCAD Visual LISP / AutoLISP :: Dimension Export Routine Modification?
Dec 7, 2012Found this routine online and am hoping to modify it to my needs, just not sure how to proceed.
It exports the text out of the dims into an excel file, the issue I have is that it automatically opens a new book every time you run the lisp with the original workbook open.
I am trying to get it to automatically insert the next set of numbers on the row below the first pull.
AutoCAD Visual LISP / AutoLISP :: Add Calculated Text To Ordinate Dimension
Aug 8, 2013Currently, when I do drawings, I give my machinists drawings with each point, and they program their machines. To do that, they calculate the round part diameters, which is basically 5" - 2x<Dim>.
I'd like it if I could give them drawings with the real number, and in parenthesis next to it, 5-2x<Dim>.
I've attached a jpg of what I normally give them and how I'd like it to look. Is this something do-able via a macro or something?
AutoCAD Visual LISP / AutoLISP :: Auto Dimension Closed Polyline
Mar 8, 2013Is there a command or a lisp that will automatically dimension each side of a closed polyline at once? See attachment for image.
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Dimension Building - Labeling Multiple Lines At Once
Sep 20, 2012How to write an AUTOLisp program to label building dimensions. With Civil3d 2013 preventing me from labeling multiple lines at once, creating building labels to dimension complex building exteriors is much more complicated than it needs to be. Lisp Routine that Generates a MText or Dtext dimension centered on a line and offset to be clear of the line. the layer for this piece of text would always be "DIMS-BLDG" and the text style will always be "L50s."
the text doesn't have to be organized as it is in this example. the main focus is the layer being correct with the foot mark, precision set to xx.x and oriented to the line.
AutoCAD Visual LISP / AutoLISP :: Routine To Alert To Overlap Dimension Lines?
Sep 9, 2013Sometimes someone dimensions a floor plan and starts one direction and then "goes back " the other way over the top of the dimension they just placed, which causes the dimension lines to overlap, which in turn shows incorrect distances when viewing on paper. Any lisp routine that can alert you to the fact that there are overlapping dimension lines (not the extension lines) in a drawing by changing them to color White or something? I have pasted a routine that we use which changes all dimenions with "modified text" to color white. That way I can see if someone just typed in the dimension distance they wanted instead of what was actually there.
(defun c:dc (/ dim_length)
(setq ssmod (ssget "X" (list (cons 0 "Dimension")(cons 1 "~"))))
(if ssmod
(progn
(setq dim_length (sslength ssmod))
(command "Change" ssmod "" "P" "C" "w" "")
[Code] ......
AutoCAD Visual LISP / AutoLISP :: Double Click Dimension For DIMRND Override
Feb 13, 2013I want to doubleclick on a dimension and have the DIMRND override appear
I can't figure out what command I need to customize the doublclick CUI
AutoCAD Visual LISP / AutoLISP :: Creating Stacked Fractions For Dimension Override
Sep 30, 2011I wrote the code below (allow the user to pick points in different viewports and then override an existing dimension's text with the difference in X values. The (hopefully) last issue is that the fractions should be vertically stacked and at 100% text size.
(defun c2text ()
(command "mspace")
(setq p1 (getpoint "Select left point "))
[Code]....
AutoCAD Visual LISP / AutoLISP :: Set Dimension Text Fill Color To Background
Oct 28, 2013I would like to set dimension text fill color to "background" instead of, you know, dimensioning my drawings properly.
I have this code I got on these forums and it works well except for the 'TextFillColor' variable. I can't find the correct color number or syntax for "Background'. It's currently set to 0 which produces ByBlock, and any number I put in there corresponds to the AutoCAD color number (1 = Red, 2 = Yellow, etc.)
If you have a better routine that you could post that works for me too. Or maybe you could just do my work for me? Even better.
(defun c:test (/ obj num cnt)
(vl-load-com)
(setq ss1 (ssget '((0 . "Dimension")))
num (sslength ss1)
cnt 0)
[Code]...
AutoCAD Visual LISP / AutoLISP :: Adding Numbers In Sequence Underneath Dimension Lines
Apr 16, 2012I have an opportunity to make a good impression at a new job, but ive never had the initiative to learn how to write a lisp routine. at my work we make walk-in coolers and freezers. these coolers are modular with a standard wall piece measuring a certain length. these wall sections have to be numbered sequentially. is there any way to automate this? sometimes we get change order from the client and it means going back and manually changing multiple texts (sometimes in the hundreds), but i thought if there was a way these wall sections could be scheduled somehow that when a new wall panel is inserted in the beginning of the sequence it would update everything after it automatically.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Change Arrow Size In Mechanical?
Feb 21, 2013I want to change the arrow size in AutoCAD mechanical using Visual Lisp. (No other language is allowed by the company).
I have the code in VBA but I have not been able to generate equivalent Vlisp code.
The code fails at the following line saying "; error: Automation Error. Problem in loading application".
Importing the library does not make any difference (but I think it is not necessary).
(vl-load-com)
(setq symBB (vlax-invoke-method (vlax-get-acad-object) 'getInterfaceObject "SymBBAuto.McadSymbolBBMgr")))
From there, I have to get the BomMgr and so on. But I am unable to take the first step itself.
AutoCAD Visual LISP / AutoLISP :: Reducing Huge Drawing Size
Dec 12, 2005I had a drawing of 64 MB size.Eliminating the single element and no element groups and optimising the block design we could reduce the drawing to 48 MB size.The drawing does not have layer filters, states and is purged completely. It contains links to an external database in which the attribute data is stored.
What else could be done to reduce the drawing size. The drawing response time is too slow as of now.