Photoshop :: ICC Profile Editor

Nov 24, 2008

Anyone knows an ICC (ICM) profile editor (by Adobe or - in lack thereof - any other, preferably freeware) to fine-tune an ICC profile created by a calibration device?

View 32 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Profile Geometry Editor - Slope-Slope Intercept To Place PVI

Aug 20, 2012

Can you not perform a slope-slope intercept to place a PVI?  Essentially holding the sta and elev of the PVI's directly before and after the PVI of interest and changing the grade in and out so that the sta and elev of the PVI of interest are changed.

View 2 Replies View Related

Photoshop :: Launching Camera Editor - Can't Switch It Back To Raw Editor?

Jan 1, 2013

I saw one video in which a Photoshop geek quickly launces his raw editor by clicking on a small, illegible icon in the lower right-hand of his Layer Icon in his Layers Dialogue but of course he doesn't explain how that works, and there is no such corresponding little sub-icon in MY Layers icon, and the word Raw doesn't even seem to show up anywhere in any menu. I know this has to be possible. I can open a raw file (.nef, in this case) the obvious way, but after switching it over to Photoshop I can't switch it back to the raw editor (?)

View 2 Replies View Related

AutoCAD 2010 :: Exit Enhanced Attribute Editor Or Alternative Editor?

Mar 13, 2012

We've just started using an attribute in a dynamic block and I'm curious if there is a faster way to edit the text, like how you just click outside the dtext or mtext editor to save and exit. the editor.

We only need to edit the value field, not any of the other attritubes.  I really like how the dynamic block is saving us some time, but the outdated editor is really irritating, and it's not always convenient to hit Tab then Enter on the keyboard.

Is there perhaps an alternate editor, or a way I can edit the value text in the mtext editor by default rather than opening up the Enhanced Attribute Editor?

System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)

View 9 Replies View Related

Photoshop :: Use Protanopia (Color Blind) Profile As Regular Profile That Can Be Converted?

Sep 30, 2013

I've been trying to reproduce this color blind conditionfor a long time now and I still didn't figure out how I can do this. I've searched for cluts but didn't find any, only this, which has some previews of them, but no any files I can load into Photoshop's Color Lookup adjustment. I've looked into Pixel Bender plugin, but I'm using CC so that doesn't work either... I've also tried it with the Index Color mode, but that really messes up my image as it has a really low color range (256). I've even tried reproducing the same effect with adjustments, channels, etc, but didn't figure it out.
 
Since there's a way to perfectly color proof images with this condition, I'm guessing this has to be some kind of ICC profile or something similar. Is there a way I can use it as a color profile?

View 2 Replies View Related

Photoshop :: How To Add Custom Working Space Profile To Profile List In CS6

Jan 28, 2013

How do you add a custom working space profile to the profile list in CS6.

View 1 Replies View Related

Photoshop :: C2 Profile Slipping Through Profile Mismatch Warning?

Jan 16, 2013

this file is tagged "c2" -- it doesn't trigger a profile mismatch warning -- why my working RGB is sRGB

View 9 Replies View Related

Photoshop :: Combine ICC Profile With Correction Curve Into New ICC Profile

Dec 21, 2012

For a monthly magazine on uncoated paper, our workflow is as follows:

- convert every photo to uncoated cmyk (PSO Uncoated) + apply some corrections to look nice in this profile
- apply a fixed correction curve to the photo's
- (resize images + apply proper sharpening for print)
- export pdf: convert colors to destination, preserve numbers
 
The correction curve step is critical. Without it, everything is printed much too dark.Unfortunately our printer can't provide us with a correct profile for the paper that is used. That's why the correction curve in photoshop is needed.The profile + the correction curve give a good, predictable result.
 
However i don't like the workflow with the correction curve, because only photoshop links can be corrected.We would also like to put a digital version of the magazine online, so i have to replace all links if i won't to have them displayed correctly.
 
Can i somehow combine the icc profile with the correction curve into a new icc profile?I did some research and found about "Custom CMYK" in photoshop (see screenshot), but i think an existing profile (PSO Uncoated) can't be edited or replicated in this dialog box.

View 5 Replies View Related

Photoshop :: Assign Profile And Convert To Profile...

Aug 28, 2008

Assign Profile and Convert to Profile does not shows in Edit menu for PS CS3. How do I get those options displayed on the Edit Tab?

View 3 Replies View Related

AutoCAD Civil 3D :: Profile Geometry Points Of Superimposed Profile To Alignment Label

Mar 1, 2013

I have an alignment label that I normally use to show the PVI's of a profile in the plan view.

This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another.  I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view.  I then went back to the swale alignment to add these labels.

It's a no-go AFAICT.  The only profile available for me to select for these labels is the original ground profile from the surface.

View 5 Replies View Related

AutoCAD Civil 3D :: How To Base Structure Profile Label Location On Top Of Profile View

Nov 4, 2013

I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?

View 9 Replies View Related

AutoCAD Civil 3D :: Creating Profile Bandsets With More Than 2 Profile / Surface Elevations Shown

Mar 14, 2013

Im creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.

<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>

Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band

My questions are as follows

1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it? 

2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch

3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .

View 3 Replies View Related

AutoCAD Architecture :: Raised Decking Profile / Create A Profile / Wall Style

Oct 9, 2011

I want to create a profile/wall style or what ever you want to call it for a raised deck flooring for external decking. I am looking at the decking material only. Not concerned about the timber framing sub floor material.

View 1 Replies View Related

AutoCAD Civil 3D :: Editing Profile Style Of Single Profile Instead All Of Profiles?

Mar 5, 2012

I have a group of profiles in a drawing and I want to change how one of the profiles is displayed through the profile view style manager, but I do not want to change how all of the profiles look. Is there a way to change the way a single profile looks without changing all of them?

View 2 Replies View Related

AutoCAD Civil 3D :: Proposed Profile And Existing Surface Not Showing In Profile

Jun 17, 2013

I have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.

View 3 Replies View Related

AutoCAD Civil 3D :: Created Profile From File But Cannot Create Profile Report

Jan 17, 2012

I am working C3D 2012.  I have a proposed alignment and profile design by another firm that I had to tranfer into C3D.    I had no problem getting the horizontal alignment to display from a text file.  I tried to do the same with the profile by using the 'create a text file and create the profile from file' command.  I got the POB, PI's, and POE to display.  I then defined the VC.  I wanted to verifiy that the profile was indeed accurate compared to what we were provided.  So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".

I know the Proposed profile is indeed set to proposed in the properties.  I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.

Is there a way to convert this profile to be recognized as a FG profile?

Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit

View 9 Replies View Related

AutoCAD Civil 3D :: Make Curb Return Profile Without Profile View Like Intersect Command

Feb 28, 2011

I try to make curb return profile without profile view like a intersect command.

I was make curb return alignment but I can not find profile command without profile view.

View 6 Replies View Related

Lightroom :: Enable Profile Corrections Auto Setting Doesn't Find X100s Profile In 4.4

Mar 27, 2014

In Development module in LR4.4, viewing a Fuji X100s raw file (converted on import to DNG) I tick the box for "Enable Profile Corrections" under "Lens Corrections," and select "Auto" from the "Setup" menu. I would have thought that LR would pick up the X100s profile, but no, nothing happens. If I choose "Fujifilm" from the "Make" dropdown, I can find the X100 (not X100s) profile manually. The profile's probably pretty similar, but still, I'm wondering why my install of 4.4 doesn't have the X100s profile in place?
 
While I'm at it, I'll ask this too -- I recently bought the new Nikkor 35mm 1.8G ED (the new full frame 35mm Nikon lens, not the trusty 35mm 1.8DX) and there's no profile for that lens in my LR4.4 either.
 
Finally, I note that when I choose "Check for Updates" from the "Help" menu in LR, I'm told there are no updates available.

View 3 Replies View Related

AutoCAD Civil 3D :: Create Dynamic EOP Profile Based On Cross Slope From Center Line Profile

Jun 28, 2012

The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline.  Well the intersection tool doesn't always work with funky intersection layouts.  Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?

Civil 3D 2012
Windows 7, 64 bit

View 1 Replies View Related

AutoCAD Civil 3D :: Structures In A Profile View Extending Outside The Profile

Nov 22, 2013

I have a 10 foot profile view and a 15 foot manhole. I want to show the manhole but not the bottom 5 feet. It is extending beyond my profile view.

Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit

View 7 Replies View Related

AutoCAD Civil 3D :: No Profile Is Drawn In The Profile View - Update

Jul 24, 2012

I have yet to produce a profile. I created a polyline and turned it into an alignment.

Looking at alignment Sample(3), I see that it is not superimposed over your surface. The polylines are, but the alignment is not. That will disallow creation of a surface profile.

Is the sample5 an alignment that sits on the surface? how come there is still no profile?

View 3 Replies View Related

AutoCAD Civil 3D :: Showing Profile Elevation Differences Right Above Profile 2

Jul 17, 2012

differences in elevations of points along Profile 2 (the proposed new road elevation) and Profile 1 (the existing elevation/surface) should be computed and shown right above the Profile 2 line. For example, if at a certain point PT 1 the elevation of the proposed road is 132.44 meters and the elevation of the existing surface is 132.45 meters, the difference is -0.01 meters and it should be shown exactly above the Profile 2 line (or a little bit above it) but not on it. The same should be done for every chosen point along the proposed profile.

So far, I have done this manually, by dragging the difference (already automatically computed and shown in one of the bands below the profiles) to the correct place for every single point. However, I don't know how to do this automatically.

View 6 Replies View Related

AutoCAD Architecture :: Transferring Tool Palettes From One Profile To Another Profile

Feb 7, 2012

I want to transfer or copy the tool palettes (walls, doors, FFE) from one profile to another. I have all my tool bars, set in one profile correctly, but all the tool palettes are in another profile.

Is there a way to copy these tools into another profile? Even if I over-right another palette?

View 6 Replies View Related

AutoCAD 2013 :: Can't Polyline Or Spline Profile Into Closed Profile?

Apr 11, 2012

The attached profile is a section from a solid.  I would like to create a closed profile in order to extrude the shape into a solid.  The polyline command and splinedit don't seem to do the trick.

View 9 Replies View Related

AutoCAD Civil 3D :: Create Proposed Profile From Surface Profile

Mar 17, 2011

We have an engineer who is taking an existing surface and wants to show a proposed road 2" higher than existing.

I told him to simply adjust his assembly for his corridor to account for the 2" difference, but the County agency needs to see a profile.

My questions:

1) Is there a way to easily copy a profile made from a surface and "convert" it to a proposed profile?  If we copy and explode, it turns into hundreds (thousands?) of tiny pline segments and it would be a mess to convert all those to a profile 1 by 1.  If we make the corridor, and choose "profile from corridor", we do not have an option that could be used to represent the centerline. 

2) Other than loss of dynamic updating), would it make sense to adjust the assembly so the top surface would be accurate, then copy the profile, explode the copy to a block and simply shift that (as essentially basic linework)?

View 9 Replies View Related

AutoCAD Civil 3D :: Profile Band / Profile Structure Mask

Jul 9, 2012

where to change the text height and color for the lower band where the stations are.  Also, how do I get the exist grade and proposed grade to show at the specified stations vertically like LDD used to do it.

Second, how do i mask the pipe in the manholes on the profile.  Right now i can see the pipe inside the manhole.  I clicked "enable masking" under the structure properties but no luck.

View 2 Replies View Related

AutoCAD Civil 3D :: Surface Profile Not Shown In Profile View

Nov 28, 2012

Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir  shoreline. 

1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing. 

2.the points having higher elevation are the  top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.

3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir. 

View 2 Replies View Related

AutoCAD Civil 3D :: Adding Profile To Existing Profile Views

May 10, 2013

I have 3 profiles that I've superimposed together.  Then I created sheets using the superimposed profile.  I used the wizard and had Civil 3d do it for me (2012).  Now I have to add a 4th profile to the mix and get it to show in my profile views that have already been cut.  The data is shortcut into the drawing with my cut profiles views.  How do I get it to be in the cut profile views without re cutting everything?

View 1 Replies View Related

Illustrator Scripting :: Missing Profile - Doc Does Not Have Embedded CMYK Profile

Apr 2, 2012

Each time I open a file in AI - CS3 I get the same message: "Missing Profile - The doc does not have an embedded CMYK profile". I looked in library>colorsync>profiles and sure enough they were gone? I downloaded new profiles from Adobe, installed them in library>colorsync>profiles - and still the same thing with each file I open. I dragged AI to the trash, re-installed AI from my disc repeated the process with the same results .

View 10 Replies View Related

AutoCAD Civil 3D :: Edit Profile Without Having It On Profile View?

Jul 31, 2013

A tabular data sheet for profiles could be very interesting.

Civil 3D (2013)

View 9 Replies View Related

AutoCAD Civil 3D :: Shifted Profile Within Profile View?

Jan 22, 2013

I have an issue with a profile referenced into a plan sheet that is shifted when I view it in the plan sheet viewport.  The profile stationing is correct in the profile dwg file and in the plan sheet dwg it is referenced into.  But when I switch from model space to paper space in my layout sheet (the file the profile dwg  is referenced into) the profile moves to the wrong station within my profile view in paper space.

The profile start station is 0+00, but it shifts to -1+00 within the viewport of my layout sheet.

The scales are the same between the dwg files (50) and the Annotation scale matches the dwg scales.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved