i am going to design a Logo for one of my client. the logo will be like an rounded shield. URL....i can write the text on upper side of te shape which is "Center for Employment Training. Please see the image. on image where this text is written on bottom of shae "Skill Training. Human Development" how to write that text . i tried to wrap the text using Arc option but the text goes stretched.
View 2 RepliesI made a Rounded Rectangle Tool with a radius of 10. Then, once I created the rectangle,
I tried to cut off the bottom so that only the top part was rounded by using the Rectangular Marquee and hitting delete.
But it deletes everything?
Basically trying to create a tab like this attached psd but using the Rounded Rectangle Tool as a shape to keep everything sharp.
I am PaintShop beginner.
When I tried to crop picture, I couldn't find option to crop through a rounded (circle) shape (just rectangle seems to be avalilable).
1) How to crop using rounded shape?
2) After crop rounded, how to save just the rounded picture? Its because when I use Photoscape (I come from this software) it crop rounded, but save with a white retangle background? So I just want the rounded picture
I am writing text on a picture of a road, and theres a bump I want to write text on it. How can I make the text take the curve of the bump?
Also how do I distort or add an effect to the text somehow to make look as if it was taken with a low-res camera?
I have two directories of images in my hard disk.One one of them I am able to write text of my choice of font , size and color.And turn them into watermarks.But on the other if I write , it comes so small its not visible at all.
View 1 Replies View RelatedI have a problem with cs3 portable.everytime i want to write a text on a image appear this "Could not complete your request because somethingprevented the text engine from being initialized"
View 3 Replies View RelatedI have a rounded corner rectangle in a template that I am working on..I would like to extend the vertically but keep the rounded edge dimensions the same as I extend vertically.
Right now I extend the rectangle but the edges also extend.
I wonder if it is possible to change the name of a file to a text layer automatically. is an example of what I'm trying to do.
I have a lot of photos then I intend to make a macro for editing it to make more precise the name of the file is saved in the image.
I am trying to learn how to write or design text letters using images for instance I want to know how i would write Photoshop using noodles or electricity wires.
View 6 Replies View RelatedI want to write text overtop of a picture but very softly.
View 2 Replies View RelatedI am using Photoshop 7.0 on Windows XP
I have been watching a lot of how to videos to learn some effects, trying to pull off this one effect. In the end I would like to create an image file that will consist of a gray transparent rectangular box that I can freely write solid text on. I would like to take this image and "drop" it onto other pictures that I have so that it can serve as a description box. I would like whatever my picture is to be my background and then have this gray box file be the foreground so that I don't have to recreate this process for every image I want to add text to, I can instead edit my Transparent gray file with the text I want and then add it to the picture I want to have text.
I am using Photoshop 7.0 on Windows XP
I have hit a wall when it comes to trying to pull off this one effect. In the end I would like to create an image file that will consist of a gray transparent rectangular box that I can freely write solid text on. I would like to take this image and "drop" it onto other pictures that I have so that it can serve as a description box. I would like whatever my picture is to be my background and then have this gray box file be the foreground so that I don't have to recreate this process for every image I want to add text to, I can instead edit my Transparent gray file with the text I want and then add it to the picture I want to have text.
With Elements 11, can I write text directly onto a photo?
View 2 Replies View RelatedI have a problem with photo Shop CC: When I try to write a text on top of a photo the screen goes black and flickers?
I uninstalled the progran earlier on today and downloaded it again but the problem is still there.
I want to make some text with two outline colours.
(I'm not too concerned at this stage with the squeezing effect on the text)
Adding a stroke layer style (then adding a second one) sort of works, but the corners are rounded - I want them (as in the Fforde book example) to follow the crisp corners of the font itself.
How do I make the frame & photo rounded just like they did in the following template I'm working on in Flash. They say they did it in Photoshop.
I used the rectangel tool and it always makes the photo inside out. I need it to round the edges not hide the photo. Is there a way to show the middle of the photo and then make a frame like they did on the website?
I'm using Photo Shop Elements.
I'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
I'm working with CorelDraw X3 and want to fill text into a round shape, while keeping it's exact outline. Hence, cutting of parts of words and letters is fine with me as long as the shape is well-defined. Unfortunately when filling paragraph text into a shape, the automatic line breaks lead to a quite irregular shape regardless of font size.
As workaround I arranged a mask in front of background and text but this requires a square paragraph text which is larger than the background. Since paragraph text obviously cannot be cropped with other objects I made the mask size bigger and filled it white. When exporting my document as image everything looks neat, but there must be a better way to do this in CorelDraw itself?
I tried converting the paragraph text into artistic text and cropping this, which works fine for a few words and a small object. But I'm talking around 1000 words here, and trying to crop this artistic text leads to very random cropping results. I guess such a large number of objects and knots is too much for CorelDraw to handle!?
I want to engrave the text 'TEST' all the way around this clonal object. When I use the emboss tool, selecting the option 'wrap to face,' it gives me an error message that the "face selected is not tangent to the profile plane."
I am using a work plane that is offset from the XY plane. I included a screen shot and the file that I am using (Inv. 2014)
I am trying to design a key chain, and I would like to write a 3D text on an arc. Is there a solution to that chalenge, other than drawing every letter with a polyline and then press pulling it?
I am working in ACad 2008.
how can i write text without a font?
View 5 Replies View RelatedWhat's the best way to curve a text to perspective like this:
The current example was manually created. Somehow doesn't seem right.
I am a c# programmer. i am now doing id card application project ....so i need to write text and save image inside .cdr file using c#.
View 1 Replies View RelatedHow could I write Persian or Arabic text with Xara 5? My text are broken while writting and exporting!
فارسی بنویسیم؟ xara چطور با
see the attachment please.
The persian text character are broken.
When I hit (t), i click anywhere and start to type but nothing shows up. its a blinking dot. Even if i make a text box, nothing will show up not even a blinking cursor.
View 1 Replies View Relatedi want to write text in multiple launguage on illustrator how can i do that ?
View 2 Replies View RelatedI have PSP 8 and windows 7. When I use the text tool to write there is no text alignment. I have lost it. How do I get it back on my tool bar?
View 2 Replies View RelatedI recently found this lisp routine which changes dimension text from the actual measurement to EQ.
(Defun c:equaldim ()
(setq newdim (entsel "
Select Dimension to Replace
with EQ.:"))
(setq newdimvalue "EQ.")
(command "dimedit" "n" newdimvalue
newdim "")
(princ)
)
I would like to be able to do the same in 2013 LT using a macro. All efforts to write a macro have failed because I don't know what controls the Text Override.
How can i write text in p by q form in mtext command?
View 3 Replies View RelatedI have some images, this image contain a real picture of house from outside with a wall in front. I want to wrtite a word in that wall in a way that people will see this picture will think that the word is wrotten to wall of house and not guess that it is made by a software.
Also, suppose that there is already a word written in the wall, is it possible to replace that word with some other word, in a way that people will not guess it is made by a software.
Text is allowed only on the outside of a rectangle shape. The text cursor disappears when I try to enter it into the rectangle and when I place it on the edge of the rectangle, it rurns into a slanted "A" and allows texting on the border of the rectangle. Corel Paint Shop Photo Pro X3 (build date Sept 7, 2010). This software came with my new HP Pavilion dv7.
View 1 Replies View Related