AutoCAD LT :: Write A Macro To Edit Dimension Text
Jul 26, 2013
I recently found this lisp routine which changes dimension text from the actual measurement to EQ.
(Defun c:equaldim ()
(setq newdim (entsel "
Select Dimension to Replace
with EQ.:"))
(setq newdimvalue "EQ.")
(command "dimedit" "n" newdimvalue
newdim "")
(princ)
)
I would like to be able to do the same in 2013 LT using a macro. All efforts to write a macro have failed because I don't know what controls the Text Override.
View 7 Replies
ADVERTISEMENT
Jan 12, 2012
I'm trying to create button with macro to edit existing text in place, with predefined text with macro .... For example, existing text is "Old text", and I want this text (or whatever I select) to edit in place with click on macro button to change it to "New text".
View 1 Replies
View Related
Apr 22, 2011
Home and work computers act differently when I initiate the dimension text edit command. One moves both the text and the dimension lines and the other only moves the text. It doesn't appear to be the dimstyle so I am wondering if it is a setvar.
View 2 Replies
View Related
Jun 29, 2012
I am trying to write a macro for a button that when I press, it goes to a certain folder on a server. Normally when you click on the "open" button, it takes you to the last file location. I want that to be ignored an goes to a certain folder.
View 3 Replies
View Related
Jan 25, 2012
I have a problem to edit the dimension with autocad 2012. When i try to double click on the dimension text, i have a error message. This command doesn't exit.
View 3 Replies
View Related
Apr 23, 2013
There was a command in 2008 called Dim Text Edit that allowed one to move dimesions - is there an equivilent in 2013? There was another one called Dim Update; is there one in 2013?
View 7 Replies
View Related
Apr 12, 2013
how to edit the line space distance for the dimension text. I can change the style, size and several other features. But the line space distance is the one thing I can't seem to edit. The only solution I know of and use is exploding the dimension and then the text turns to mtext and the option becomes available. But then if the section changes to a shorter/longer area, i have to go through several steps with the exploded lines. how to edit the line space distance for the annotation in the dimensions. i have also attached a pic of my issue as well.
C3D 2014 SP1
DELL Precision T3600
Intel Xeon E5-1650 @ 3.20GHz
NVIDIA QUADRO 4000 Dual Monitor
32 GB RAM / Win7 Pro 64-bit
View 9 Replies
View Related
Dec 13, 2011
I am trying to edit the placement of vertical text within a dimension line - I wish for the text to be outside the dimension line not inside.
View 4 Replies
View Related
Jun 27, 2011
If I place a dimension and have text above and below the dimension line (using X), and then grip edit the dimension text to move it for space/clarity on plans, the text above and below the line will mysteriously move closer to the line. If I have backgrounds applied to the text, which I normally do, the backgrounds will cover the line. Even without the background, it looks odd next to other dimensions that were not grip edited.
Civil 3D 2011
Windows 7 x64
View 1 Replies
View Related
Feb 12, 2013
I want to take the current document, convert to PDF using a profile I have saved, then create a new email message in Microsoft Outlook, attach the PDF that saw just created, and use the file name as the subject of the email (minus the file extension).
Bonus points for also selecting a signature that I have in Outlook. I know the PDF creation can happen, and I know I can save the file name to be passed on, but can I access Outlook from CorelDraw?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
View 14 Replies
View Related
Sep 18, 2012
Is it possible to write a Macro in the CUI that opens a drawing in Read-Only mode? Limitation : AutoCAD LT.
View 7 Replies
View Related
Nov 13, 2013
trying to write a macro to open to a specified directory.
SendKeys "^(o)"
SendKeys "\G-SERVERCorel Draw files
SendKeys"{ENTER}"
Problem is that it doesn't type the text exactly as given. Randomly drops off the first few characters.Because hitting open defaults to the libraries instead of my server where the files are located.
When you hit open the cursor is already in the "File name:" field so if I just type the directory there and hit enter it takes me to that directory. Sure would be nice to just have it type that for me and enter. Had it working great for a few times but aftaerr navigating around for a bit it drops off those characters.
View 9 Replies
View Related
Aug 17, 2011
how to write macros.I'd like to draw a line. This line must be in the same place wherever I put on the macro code and not on a user friendly dialog box. I have too much to learn still psudo code
draw blue line 7 pixels wide on layer "guideline" starting at x 500 pixels and y 300 pixels and finish at x 600 pixels y 400 pixels.If Guideline layer does not already exist, create it.
How do I write this macro.How do I install it? How do I execute it?
View 2 Replies
View Related
Apr 10, 2011
I have tried to use the Macro recorder to record the keystrokes as I get the dimensions from the top of the rectangle to each line of text & from the edge of the triangle to each line of text. Unfortunately the recorder could not record.
Is it possible to design a macro which can be used to get the dimensions as required ?
View 1 Replies
View Related
Jun 2, 2011
I'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies
View Related
Feb 21, 2013
Can i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies
View Related
Dec 29, 2010
every one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
View 9 Replies
View Related
Jul 29, 2011
When doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
View 3 Replies
View Related
Dec 9, 2013
I am looking for a (preferably free) Auto Dimension Macro for X6.
View 5 Replies
View Related
Apr 25, 2008
my normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
View 7 Replies
View Related
Oct 29, 2012
I am trying to design a key chain, and I would like to write a 3D text on an arc. Is there a solution to that chalenge, other than drawing every letter with a polyline and then press pulling it?
I am working in ACad 2008.
View 4 Replies
View Related
Jun 3, 2013
The drop down arrow and check mark have disappeared from my Edit Dimension Dialog Box. What are the setting to turn those back on?
View 4 Replies
View Related
Jun 1, 2011
I have written a function to draw polyline (with dimensions), by getting input points from user.
[URL]
Now, I have to give a provision for user to edit the dimension of each side.
I have also written a function in which if the user double click on the dimension, a dialog box will appear and prompts for new distance.
My problem is now writing the program to change the polyline segment based on the new distance value.
View 4 Replies
View Related
Jun 22, 2012
I need to modify some of the dimensions (text only) in a standard template of outline drawing for different cases. I tried to identify the dimensions which need modification by using handle.
But after that i have no idea how to change the text in it.
View 8 Replies
View Related
Feb 25, 2011
I have AutoCAD 2011 now and I am not sure where the Dimention style edit (to show in all dimention lines I am using) is...what I have to do now is to change each line EVERY time I dimention any thing.
the other thing is how to scale the drawign in viewport. In older versions it shows easily. Where is it in this one!?
View 4 Replies
View Related
Jan 18, 2012
How can i write text in p by q form in mtext command?
View 3 Replies
View Related
May 24, 2012
I am using Inventor 2010 Professional Student. I have drawn and extruded on a plane. I need to move this plane to a new measurement (from -45 to -47). When the Edit Dimension box appears, I type the new measurement in, but the plane wont move. I have a lot of construction sitting on this plane, but it is in the wrong spot.
View 2 Replies
View Related
Dec 9, 2011
Seen this recently? Using Inventor 2012 SP1 on Windows 7, 64 bit. If we go back into a previously created sketch and edit or add a dimension, upon clicking the green check mark to complete the dimension edit, the sketch exits back to the modelling environment, meaning we have to edit the sketch again to continue with other changes. Obviously no big deal if I'm only editing one dimension, but how often does that happen?
This started happening prior to SP1 being installed. We have this happening on multiple computers (all with the same hardware specs) in our office. I don't believe it to be a hardware or driver issue, but I am wondering if it is a process issue. For example, we use project geometry a lot, even projecting from other parts within an assembly (non-adaptively). We also work on SAT file models, rather than geometry initially created from Inventor itself.
Inventor 2013 Product Design Suite
Vault Professional 2013
Windows7 x64
Autodesk Inventor Certified Professional
View 9 Replies
View Related
May 25, 2012
Is there any way to set that 'edit dimension' window/box in the sketch environment so that it opens to the length of the parameter being used? All my models for our library items are entirely controlled by Excel sheets and the names of the parameters are often quite lengthy. It's very annoying to have to drag the edit dimension box wider each time and push home or end to see everything.
View 4 Replies
View Related
Feb 28, 2013
I have the "Edit dimension when created" option unchecked in my application settings but it still does it anyway. How do I fix it?
Inventor 2013
Windows XP
View 1 Replies
View Related
May 19, 2012
I have three workplanes. All three were created the same way (offsetting an existing workplane). I want to change the offset dimension. I can on one of the planes, but on the other two, I have to "Redefine Feature". There is no Edit dimension available in the menu.
One plane like this:
Two planes like this:
Why is it different?
View 3 Replies
View Related
