Photoshop :: How To Update Duplicated Layer To Its Original
Feb 20, 2012
I'm trying to paint over a picture but I'm painting over it with no opacity (which means yes, I'm painting over the picture invisibly) because I want to be able to see what I'm painting and the paint would block out some parts or "shadows" and contrasts of the image that I might've missed. So the problem here was how bothersome it was getting to constantly switch the opacity bar from 0% to 100% (I need to also see where I'm painting and check over any mistakes). So I thought I could just duplicated the painted layer so I would only have to click the duplicated layer instead of using the opacity bar to switch. But the duplicated layer is only left off to when it was first duplicated. It doesn't show the recent parts that I painted over. I remember taking Computer Graphics once and the teacher mentioning something about duplicating a layer and having that duplicated layer constantly updated to match the original layer (from every mark that is placed on the original layer).
So basically how would I make a duplicated layer update to its original layer every second?
View 2 Replies
ADVERTISEMENT
Jun 16, 2012
I am learning to make an envelope and the tut calls for me to make little sewed rectangles around the edges which are to be colored red and blue every other rectangle.
Draw the Rectangle > Ctrl + T > Right click > Skew > and then
Ctrl + Alt + T to Duplicate > press right arrow key to move and repeat until the end of the envelope > and then
Duplicate Layer > change color from blue to red
Here is where I am lost:
I am suppose to select every other rectangle and delete them in order for the rectangles to be blue, red, blue red . How to go about doing this and I have been unable to find a solution in faq's or other posts within the forum(s). I'm not even certain how to ask the question so, that may be part of my quest denied
In Inkscape I would just ungroup them so that I could manipulate/delete them as individual shapes and then (if needed) use the rubber band to recollect them and click a regroup button. I cannot seem to find anything similar to this in PS.
View 7 Replies
View Related
Aug 18, 2005
i duplicated a layer, and made the original layer invisible. i cropped the duplicated layer, and it's weird, the original layer also gets cropped. why is this isso? the duplicated layer is the one active, any ideas?i know this isn't supposed to happen, right?
View 1 Replies
View Related
Jul 24, 2012
It's a common practice when building layers to duplicate existing layers as a start. Additionally, it is good practice that layer names be meaningful.
Suppose I start with the following layer: layer 1
If I duplicate that layer, it seems reasonable I'd get: layer 2. Instead I get: layer 1 copy
Then if I duplicate again I get: layer 1 copy#1, even though this is copy #2.
I propose the following: An option be available whereby user is queried for name of any layer which is to be generated. This is easier than having to edit automatically generated layer names.If automatic layer names are to be generated, code first checks if previous layer name ends in a sequence of digits. If yes, then these digits are incremented as an integer until a unique layer name is generatedIf the layer name does not end in a sequence of digits, then "#1" is appended to the layer name, and the "1" incremented until a unique name is generated.
So with this algorithm:layer 1 would become layer 2 for a first copy, then layer 3 for a second copy, etc.background would become background#2 for a first copy, then background#3 for a second copy, etc.
The problem with using "copy" in the layer name is that it is probably only in the substantial minority of cases that the newly generated layer is destined to be a true copy, so the automatically generated layer name is very likely inappropriate. Better is to use a simpler, shorter name which applies in a greater fraction of the applications.
View 1 Replies
View Related
Jun 23, 2013
I need to work on some files on my laptop, but don't need my 22,000 photo catalog. Also, how would I update my original catalog?
View 4 Replies
View Related
Jun 1, 2012
I have lightroom 4 and cs6. when i open a photo into photoshop, edit it, and save it, it does not update the origional photo in lightroom, how can i get it to update the origional photo?
View 6 Replies
View Related
Aug 28, 2012
I have a customized button to draw an ‘ac-arrow’. I created a lisp to create the layer “G-ANNO-LEDR”
if the layer name is not found. The advanced part I would like is:
Current layer: E-ANNO-WIRE
Ac-Arrow Leader: G-ANNO-LEDR
OPTION 1:
If, say I am on current layer “E-ANNO-WIRE” and need to draw my “ac-arrow” leader, and continue working
on the original layer “E-ANN-WIRE” (and have the leader be drawn [remain] on the layer “G-ANNO-WIRE”).
With this option, I have the block “ac-arrow” imbedded in my template drawing file to have the block at hand.
With this option, the layer “G-ANNO-LEDR” will be created IF it is not on the drawing.
OPTION 2:
- Currently be on layer “E-ANNO-WIRE”
- Bring in the block “ac-arrow” from my block library “L:AutoCADSymbols”
- Draw the “ac-arrow” leader which will be on layer “G-ANNO-LEDR” (this layer created IF it is not
on the current drawing).
- After the leader is drawn’
- Be put back to the layer I was, “E-ANNO-WIRE”, and continue working.
The OPTION 2 is what I would really like to have. A while back, I happen to see one like OPTION 2, but I cannot
find it anymore on the users groups. I have been searching for a while now.
Currently, I use the button in my customized toolbar (see image) and have to have the “ac-arrow” block in my drawing and have its layer created in the drawing.
View 1 Replies
View Related
Mar 7, 2013
I have a complex assembly where I would like to insert a mirror image of it into my project. Some of the parts in the mirror image are truly mirror images of the corresponding parts in the original, while some don't need to be. However, I don't mind if all parts are mirrored. The thing I really want to achieve is to have the mirrored assembly UPDATE when the original changes. Is this possible?
My alternative is to delete, re-mirror the original, and re-constrain each time I change the original. That seems sub-optimal.
Inventor 2013
View 7 Replies
View Related
Sep 17, 2013
I'm on a Win 7 machine using Illustrator CC, using a mouse with the pen tool.
I created some shapes on one layer, and now want totrace just the outside of those shapes on a different layer. It worked well enough on the first two shapes I did this with (both comprised of ellipses layered to create a particular shape) but on this third one, it keeps bouncing me back to the original layer. This is the only shape that includes straight lines but I can't think of a reason that would keep me from being able to trace the outline of shapes on a different layer.
View 10 Replies
View Related
Jan 8, 2009
How do I open or place a new layer BELOW the ORIGINAL. I have tried dragging and that doesn't work. I have tried control/click when I create a layer and that doesn't work.
View 8 Replies
View Related
Dec 14, 2012
I like to keep my layers carefully named. I often create new layers over existing ones to build up effects and paint in details. When I merge these layers, Photoshop always assigns the new merged composite layer the name of whatever the topmost layer was. I would much prefer it to default to naming the new layer whatever the bottom layer was called. I'm using CS5.5.
I might start with my assets in a file, with layer names like: Model, Field, Product, Logo, etc... Then add effects on layers called, Shading, Highlight, Package Detail, Lettering, etc... over each original layer. When merged, instead of being named the more-appropriate names, it will of course use the top layer names and I end up with my layers called "Shading, Highlight, Package Detail, Lettering. It's made much worse when I duplicate effects to modify and apply to multiple layers, then merge, leaving me with a file with layer names "Highlight, Highlight Copy 1, Highlight Copy 2, etc..." Renaming to my original layer names is very tedious as a result.
View 4 Replies
View Related
Apr 30, 2013
In Elements 11 each time I copy a shape the pasted copy appears in a new layer. I would like to have the pasted copy stay in the same layer as the original shape. How do?
View 1 Replies
View Related
Mar 15, 2013
Creating a collage. Just placed a new object with a layer mask. Now I need to create a hue/saturation, levels adjustment layer and color balance adjustment layer all with masks. Ok, no problem, but when I do this, my original picture turns black and white.
View 3 Replies
View Related
Jan 24, 2013
I select a layer to work on it, move the layer, click on the canvas, & PSD activates a different, wrong layer. This happened on a new project and an older one that used to work. It seems to only affect layers that have been re-arranged.
View 4 Replies
View Related
Dec 11, 2012
I'm experiencing strange layer comps behaviors since Photoshop 13.0.2 update, on an existing .psd file. If some comps are correctly rendered, some others are not refreshed: layers visibility is not updated, workspace seems to be frozen, using for instance the magnifier tool to zoom in/out renders a completely white workspace, and moving then my mouse pointer above it only refreshes its lower half part (a little bit more actually). Moreover, Photoshop CPU consumption becomes quite high as long as I stay on such composition (around 50% CPU instead of 2% compared to working comps).
I've tried to disable GPU from Photoshop preferences, Machine is a mid-2010 17" MBP w/ i7@2.66. No problem with the same .psd file before upgrading to 13.0.2..
View 12 Replies
View Related
Mar 23, 2006
I'm updating an animated gif. It has 6 layers. It starts without anything but a background and progressively shows a bubble slowly lowering (the bubble similar to the ones in comics that show what the characters are saying) . The 6th layer shows most of the text and says (among other things) "Spring Conference 2004". I removed the '4' from 2004 (I switched from within Imageready to Photoshop to clone it out) and want to replace the '4' with a '6'. When I put in the '6' (back in Imageready), it goes on each layer but i only want it on layer 6. So the '6' is in the right spot in layer 6 but shows in the same spot in all 6 layers.
View 1 Replies
View Related
Apr 28, 2008
When you create a text layer, it automatically names the layer whatever you type. If you go and rename the layer, it keeps that name regardless of what you type on your document.
What I want to do is revert the layer back to doing it's auto naming thing. Is there any way to doa that?
I can't just do "undo". Its an old document. I know I can copy the text into a new text layer and it will name it the way I want to, but I don't want to do that if I don't have to.
View 1 Replies
View Related
May 24, 2013
Is there a way to revert back to the original colors of an xref besides having to reattach the xref and purging the DWG.
I always change the colors of the projects Existing site/utilty XREF to color 252 to shade it back to have the proposed show up darker. But I try to select all layers to change the colors back to what they were before and the box to set color by layer is not available.
View 5 Replies
View Related
May 15, 2012
Every time I create a new layer, name it, asign a color, linetype, etc...it defaults back to the original color, making me set it twice. Am I missing a setting somewhere?
View 2 Replies
View Related
Oct 7, 2013
How to optimize duplicated frames in an animated GIF through using Photoshop?
View 2 Replies
View Related
Sep 8, 2013
I recently upgraded my computer from Windows XP to Windows 7 installing a new hard disk in the process.
Before starting I used PSE 6 to backup the catalogue.
I installed Windows 7 on the new disk and copied all my data files (including pictures) from the old HDD.
I then restored the catalog on the new drive after installing PSE 11.
All seemed fine, so I carried on working on my pictures.
Now some weeks later I notices that the restore created duplicates of ALL my pictures, so for example, as well as _MG_0876.CR2, there is also a copy of it called _MG_0876-1.CR2 which is the one that is actually in the catalogue.
This seems really silly at best. If I restore the catalog, the restore should ASK what to do about duplicates, not just create thousands of duplicate files willy-nilly.
The ONLY easy solution to this mess I could find was to delete the entire fiolder structure and restore the backup again, which has resulted in my loosing at least two weeks worth of work in the form of image editing. Going through and manually deleting files in Windows Explorer just wasn't an option.
The manual doesn't mention that this will happen at all.
1. What is the recommended procedure?
2. Why isn't this described in the manual?
3. Why doesn't the restore ASK what to do with duplicates?
View 2 Replies
View Related
Dec 11, 2012
this has been only happening since updating this morning from 13.0.1 - 13.0.2...I have a problem where if I create a new curve layer and then press the preview button on/off it fails to re render the preview and nothing else happens until I OK it. I also notice that it creates history entries on the history panel like I'm making adjustments? Weird!
There's been a few other noticeable things too. The liquify window now doesn't draw as nice and smoothly as it did with 13.0.1. The cursor jitters a lot and control isn't as smooth.
View 2 Replies
View Related
Sep 23, 2011
Basically just want to make the middle separating line in the following image:
Identical to (same degree of horizontal fadeout into transparency):
I have spent hours on it trying to edit the original layer below the alpha transparency or adding layers, getting nowhere.
View 2 Replies
View Related
Jan 12, 2014
I recently had my computer reformatted and notice that following Photoshop Elements reinstall and catalog restore all my photos have been duplicated in the Adobe/digital photos folder. I have read that this is due to my computer tech restoring all photos in the original folder structure prior to me executing the catalog restore (I should have done my research first). My question is what can I do now to eliminate the duplicates? Do I delete all photos and the Adobe folders or is there an alternative?
View 5 Replies
View Related
Sep 9, 2013
A TIFF file has a DNG file as a smart object inside it ...If you duplicate this file, the smart object can not be opened any more.
View 3 Replies
View Related
Feb 7, 2014
Can an item of 1 Bit depth have layers which can be copied or duplicated. My 1 Bit item is partially locked and the layer menu does not permit any operations.
View 4 Replies
View Related
Jan 13, 2014
When you select the option to apply any changes & overwrite your original photo does the program attempt to try to a default setting to keep the picture approximately the same size as it was before? (assuming that you haven't cropped it) If it doesn't default to a size automatically can is there an option to do so?
View 4 Replies
View Related
Oct 17, 2011
I've created a VB.NET routine to update blocks, layers and layer filters from a source drawing.
After updating filters and when the command is finished (dialog closed), the Layer Properties Manager palette MAY not update to show the new set of filters although visually you can see that it does appear to refresh itself.
Whether it updates seems to depend on which filter is active and which filters are added.For example, I have properties filters A, B, C, D and E, and B and E have subfilters B1-B8 and E1-E9.
If Filter E3 is removed as a test and the parent filter E is active, when the command is done, E3 should appear back in the list, but it does not show until the palette is closed and reopened. If filter B is active, then the list will refresh and E3 will show immediatlely after the command exits.
I have added a dialog to my routine to inform the user they may have to close the palette and reopen to get the proper display.
I have tried Editor.UpdateScreen() but that does not work.
View 2 Replies
View Related
Jan 14, 2013
I have a drawing with several layers being used. I also have some objects that are included in rectangular arrays.
When I update the colour or visibility of the layer, the array items do not follow the layer properties.
I have verified in the properties that the array object is on the correct layer.
Windows 7 64-Bit
AutoCAD LT 2013 SP 1.1
View 9 Replies
View Related
Jan 23, 2011
I've been making a video with about 400 photos on it and am using various transitions.
What I can't work out what to do is how can I edit a transition then save or copy that edited version of the transition off somewhere so I can use it multiple times? It seems I get the 'base' transition, can add it to the timeline then have to edit each and every transition - it takes hours!
View 3 Replies
View Related
Mar 22, 2013
I have a customer that has a drawing that keeps duplicating sites and putting feature lines on top of each other. What would be causing this?
View 9 Replies
View Related
