AutoCAD Inventor :: Mirrored Assemblies That Update With Changes To The Original?
Mar 7, 2013
I have a complex assembly where I would like to insert a mirror image of it into my project. Some of the parts in the mirror image are truly mirror images of the corresponding parts in the original, while some don't need to be. However, I don't mind if all parts are mirrored. The thing I really want to achieve is to have the mirrored assembly UPDATE when the original changes. Is this possible?
My alternative is to delete, re-mirror the original, and re-constrain each time I change the original. That seems sub-optimal.
Inventor 2013
View 7 Replies
ADVERTISEMENT
Oct 3, 2011
I am working in an Inventor Assembly .iam, I have about 250 fasteners (screws) that are constrained to a flat washer and lock washer. I would like to put them in as a single unit (sub assembly if you will) and then promote or explode them in the top level so that my bom has 250 screws, 250 washers, and 250 lock washers all at the same level, not associated to one another except thru the constraints that were entered in the original assembly. I have tried Promote but that doesn't work because it removes the washers from the original file and I end up with only 1 instance of the assembly. Am I approaching this incorrectly? Is there a better way? I run across this scenario with different components quite often.
View 2 Replies
View Related
Mar 8, 2012
If you have created a sub assembly and inserted it into an upper level assemby, is there a way to bust up the sub assembly at that level?
The issue arising is the individual components need to be called out on the upper level, but in the drawing are all showing up as the same balloon.
View 4 Replies
View Related
Jul 12, 2012
i have a valve vault assembly that i am creating that has two headers running through a large cylinder vault. how i get a total BOM if i were to create the header assembly file separate from the the total vault assembly file. is there a way to explode the header assembly bom when i do the drawing.
View 1 Replies
View Related
May 24, 2012
I have an ipt A and its dwg. I have an ipt B that is the derivative and mirrored ( I use derive command whit flag on mirror part) component from ipt A.
Is there a way to not create the dwg of B ex novo? I have the same dwg but I have to re dimension all.
View 6 Replies
View Related
Dec 20, 2011
I have a sheet metal part with a fully dimensioned drawing made for it. I then make a mirrored (derived) part out of the original. Is there an easy way to get a fully dimensioned drawing of that mirrored part?
I have tried making a copy of the original parts drawing and then replacing the model that is referenced in the drawing but that just gets me a drawing with a bunch of pink dimensions and I have to drag all the dimension points to reattach them.
View 4 Replies
View Related
Oct 22, 2013
I have inv2014 , and im having a problem whenever i mirrored a part in assembly. A hidden dimension of a part always shows up after i mirrored it in assembly, and then i have to go to that part in assembly and turn off the visibility of that sketch/dim.
View 1 Replies
View Related
Dec 1, 2011
Im using Inventor 2011. I mirrored an assembly contained 3 smaller assembly (each assembly had 6-7 parts).
I want to edit some parts in the new mirrored assembly, but I cant.
How can I edit the mirrored parts?
View 1 Replies
View Related
Oct 10, 2012
I was wondering if there is a way that a mirrored part can be redefined. Problem I have is that after renaming the parts in the assembly the mirror will no longer update and references the original part before being renamed. I can't seem to find a way to redefine this so my mirrored part will update. To date I have been deleteing out the mirrored parts and creating them again.
View 1 Replies
View Related
Nov 7, 2013
Mirroring a part or assembly in 2014 makes the derived part with all sketches visibility on, nevertheless the original sketches visibility is off.
[URL]....
It makes me sick switching them down.
Is it treatable?
View 9 Replies
View Related
Jun 23, 2013
I need to work on some files on my laptop, but don't need my 22,000 photo catalog. Also, how would I update my original catalog?
View 4 Replies
View Related
Dec 4, 2013
I need to create such part by using Metal Sheet features from Inventor (2014). The problem is the final face..which can't be mirrored correctly and sure can't go with "flat pattern.
View 3 Replies
View Related
Aug 22, 2013
I have a sheet metal IPT that I saved, then did a saveas and saved as a different file name. I then took the part in the new IPT and did a mirror on the part. I chose the second "Mirror a Solid" option in the mirror dialog box, and clicked "Remove Original". Now that I'm at this part, when I try to make a flat patten of the new mirrored part, all I get are the bend and center lines of the part, not the internal and external lines that I can export for use in water/laser cutting.
I was wondering if I was doing something wrong in order to make this work. In looking through the forums I have seen people say not to use the mirror command in an assembly and create a derived part because that has issues, but I did this in an IPT, not an IAM. I have also read to make sure that the Sheet Metal Defaults are set the same, but I believe that they are talking about the derived part from an IAM drawing. All the same, I have checked my Sheet Metal Defaults and they are all the same, and in fact I tried updating them to see if it would still change the part, and it did. I was able to make my part other thicknesses and it updates the part as per the norm.
I am using Inventor 2013 Professional, if it matters at all. I have also attached a couple of picture files showing the part folded and how it looks to me when I go to the flat pattern.
View 3 Replies
View Related
Feb 20, 2012
I'm trying to paint over a picture but I'm painting over it with no opacity (which means yes, I'm painting over the picture invisibly) because I want to be able to see what I'm painting and the paint would block out some parts or "shadows" and contrasts of the image that I might've missed. So the problem here was how bothersome it was getting to constantly switch the opacity bar from 0% to 100% (I need to also see where I'm painting and check over any mistakes). So I thought I could just duplicated the painted layer so I would only have to click the duplicated layer instead of using the opacity bar to switch. But the duplicated layer is only left off to when it was first duplicated. It doesn't show the recent parts that I painted over. I remember taking Computer Graphics once and the teacher mentioning something about duplicating a layer and having that duplicated layer constantly updated to match the original layer (from every mark that is placed on the original layer).
So basically how would I make a duplicated layer update to its original layer every second?
View 2 Replies
View Related
Jun 1, 2012
I have lightroom 4 and cs6. when i open a photo into photoshop, edit it, and save it, it does not update the origional photo in lightroom, how can i get it to update the origional photo?
View 6 Replies
View Related
Sep 17, 2009
I created a sheet metal part with multi-edge flanges; the part unfolded no problem. Now, I need an exact, mirrored copy of that part [new part number]. My first attempt was a mirrored component at the assembly level. The part was mirrored but it would not unfold. My next attempt was a derived part with the mirrored option selected. This part, too, was mirrored but would not unfold either.
"In sheet metal parts, mirroring flanges or contour flanges created using multi-edge select is not supported." Is this why the flat pattern fails?
Is there a workaround? I'd hate to create the mirrored part from scratch when I all need is reverse bends.
View 9 Replies
View Related
Dec 9, 2013
I made a change to my materials library. I changed the color (from dark grey to light grey) of one material. I then saved this back to my library.
Now, when I start a new part, I get a warning that the material does not match the library. So, rather than using the material in the part, I opened the template and updated the material to match the library. (Manage >Update Styles).
This is where the problems come into play. In the update styles dialog, if I compare materials against my custom materials and then compare it to my Favorites, it just a continuious circle. It is like the favorites are stored inside the part and do not get updated to match the custom materials library. (I thought the whole idea behind using a library was to get the information out of the parts).
Here is a short video showing what it does. [URL] .....
The only way I can get the favorites to match is to delete the favorite material, update the style and the add the favorite back in. That is a bunch of work. The problem I got with this is that there are thousands of parts that have been created that has this favorite in it. The only way to update these is to open each part (if I knew which one), delete the favorite, update the materials and then add the favorite back in.
I see the same thing in 2013 and 2014.
View 3 Replies
View Related
Jul 20, 2012
I'm trying to use assemblies when creating a corridor. The Tool Pallette is emply but I can drag the assembiles in from the Catalog. I've also created an assembly using the ASC. Neither work when I try to use them. The error message is attached.
I'm using a network installation and I do not have the option of changing it to a DVD installation.
View 2 Replies
View Related
Apr 1, 2013
I have created the part based on piece of standard angle taken from library. Now I want to make a mirrored copy of this part by Component-Mirror.
Inventor does not let me do it with standard part.
The question is: How I can transform a standard part to normal one, I mean I could get rid of belonging to standard part? Making a copy does not work. The only way is to derive and mirror this part but I wish there could be easy way.
View 9 Replies
View Related
Dec 3, 2013
Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 Replies
View Related
Mar 25, 2013
I have 2 tanks, each one is an assembly in itself, and they have to be positioned on a steel skid, also an assembly and then interconnecting pipework between the two. My prioblem is that I can't seem to find a way to position the two tanks at a set distance from each other and in relation to the edges of the skid.
Because of this, my pipe router is going all over the place in trying to join up the two termination points.
View 4 Replies
View Related
Sep 22, 2009
Will the next release of Inventor have the capability to perform FEA on bolted assemblies?
View 9 Replies
View Related
Dec 20, 2011
In SW I was able to create assemblies that had components with limited motion and then set them as "Fllexable" and allow them to move in larger assemblies. How do I do this in Inventor? I have a trailer with both the front and rear axles able to pivot. These axle sub-assemblies are both able to pivot as top level assemblies but when they are assembled in the trailer assembly the only way I have found to allow movement is to make one axle active and move it then activate the other nad move it. This doesn't work well if there are several interdependant subassemblies that should move together. I am in Inventor 2012.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
View 2 Replies
View Related
Oct 21, 2011
I use hinges in my door assemblies and they are basically placed into the assembly each time and become flexible so the doors can operate. The hinges are one size and don't change in any way or shape. What is the best practice for inserting these hinges into my door assemblies?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 2 Replies
View Related
Aug 3, 2012
I have converted a lot of STEP files to .iam files. What is the easiest way to put them in a library? there is realy no need to publish them is them, i already have them in subfolders etc.
View 6 Replies
View Related
Sep 27, 2011
We have some structure issues going on. Below is an example of our current structure.
1. Overall Frame Assy
2. Frame Weldment
3. Spine Weldment
3. Bracket Assy
4. Deck Brackets
4. Air Brackets
4. Hyd Brackets
The biggest problem is we have all of these level 3 and 4 subassemblies that need to reference upper level assemblies to show placement on the drawings. We have tried utilizing LOD's and view reps but still can't fix the problem. The problem comes into play when we get to upper level assemblies that become so huge because of all of the references that are happening at lower levels. It is structured this way to create small BOM's and to be able to use in multiple different structures without having to pull a new Part Number.
We need the reference geometry to be able to show on the drawing our locations of all of these lower level assemblies and how they mount to the frame in their respected locations.
View 3 Replies
View Related
Apr 24, 2012
I'm trying to change the BOM structure of some sub-assemblies from "Normal" to "Phantom". However, some are displayed as disabled and therefore do not allow any changes/overrides. How can I enable these in the BOM?
Inventor RS 2011
AutoCAD Mechanical 2011
ASD 2013
Vault Collaboration 2011
Windows 7 Pro
View 4 Replies
View Related
Aug 14, 2013
This is using Inventor 2013 Professional.
I've created a simple iPart and want to insert multiple instances of it into an assembly. The plan is to use a parameter-driven iPart to create multiple variations on the same basic model which will eventually be lasercut.
I've included a sample archive. 2DiPart is a simple part with a couple parameters. 2Dassembly is where I've tried to include this part. I'm able to walk through all the dialogs to place the iPart, and will even see it in the canvas as I select the insertion point. However, after I dismiss the dialog, nothing shows up in the canvas. I'm still able to see the component instances in the project explorer however.
How to best to get multiple instances of a parametric iPart into a drawing that can be lasercut.
View 2 Replies
View Related
Jul 6, 2012
What is the best setting for shrink wrapping an assembly?
I've found shrink wrapping it as a surface causes problems with the video card when rotating the model and placing views on a drawing.
View 9 Replies
View Related
Oct 16, 2012
I'm having a problem highlighting parts within a sub assembly. A simple structure to demonstarte this issue would be:
TopLevel.iam
|
SubAssy.iam
|
ChildPart1.ipt
ChildPart2.ipt
Using this structure I wish to highligh ChildPart1.ipt, howver my vba macro code below doesn't seem to work (nothing happens):
Public Sub Highlight()
Dim SubAssy As Inventor.AssemblyDocument
Dim ChildPart1 As Inventor.ComponentOccurrence
[Code].....
View 2 Replies
View Related
Feb 27, 2012
I have assembly with over 100 sub assemblies. I need to export the COG for each sub assembly to excel. The COG must be in relation to the parent assembly's origin point.
I can get coordinates manualy (right click on sub assembly - iProperties-Phisical), but it is take a lots of time.
Autodesk Inventor Professional 2013
Windows 7 64-bit
View 5 Replies
View Related
