When I move my cursor over a document tab that is too short to show the whole file name, a pop-up appears with the full file name. The pop-up covers most of the tab, making it harder to click on it. I'd like to turn off this feature. I don't see anything in Preferences to do that.Â
View 4 RepliesHow can I stop changing active document? I was thinking I could use this, but I don't know how to cancel it in the event handler:
Â
AcadApp.DocumentManager.DocumentToBeActivated += new DocumentCollectionEventHandler(DocumentManager_DocumentToBeActivated);static void DocumentManager_DocumentToBeActivated(object sender, DocumentCollectionEventArgs e){ // Messagebox to ask if user are sure bool AreYouSureYouWantToChangeActiveFile = MessageBox.... if(!AreYouSureYouWantToChangeActiveFile) //cancel change active file somehow...???}
I work as a production artist and go through tons of art sent in from clients each day. Is there any way to stop swatches from copying from one document to the other? They build up and cause the program to lag or crash.
View 2 Replies View RelatedI've created a pdf file (with illustrator cs3). when I try to open it on photoshop CS3 I receive this message:
"error opening the portable document file (PDF) document. error code = 0X20030055"
I can open this pdf file outside photoshop.no problem openning other pdf files on photoshop.
I inadvertently saved a document as a jpg and wondered if there is any way I can convert it to a document file that is handled more easily with a file that is other than a photo file?
View 1 Replies View Relatedas of yesterday i have been receiving an alert when i try to move a jpeg into a new photoshop doc stating that my target document has a different depth than my source document and will (which it definiately does) result in lower than expected quality.
Photoshop specs: CS6; RGB; 16 bit; Res 300 pixels/inches; size: letter; (advanced setting - don't know what these are) color profile: sRGB IEC61966-2.1; Pixel aspect ratio: square pixels
The code below crashes with an "attempt to write to protected memory" Â in debug mode (it crashes when it hits acDocMgr.add)but in the Release version it works fine. I am using Command Flags.Session
Dim acDocMgr As DocumentCollection = Application.DocumentManager Dim pStyle As Integer = Autodesk.AutoCAD.ApplicationServices.Application.GetSystemVariable("PSTYLEMODE") Dim acDoc As Document = Nothing If pStyle = 1 Then   acDoc = acDocMgr.Add("acad.dwt") Else acDoc = acDocMgr.Add("acad -Named Plot Styles.dwt") End If
I tried to print thisdrawing.modeldocument in a vba sub, but it doesn't work.
View 4 Replies View Relatedphotoshop cs6 won't stop quitting.
View 2 Replies View RelatedCan't find a way to stop 3D rendering in Photoshop CS6!
Â
Only with force quit...
Whenever I open a file, it instantly starts zooming in as if I'm holding download option and turning the mouse wheel. I've change the keyboard and mouse, restarted my mac, reinstalled photoshop, but it's still doing it. This isn't happening in other applications.
View 3 Replies View RelatedCS6 keeps crashing without any previous warning on me-- and taking the whole computer with it-- whenever I've been working in CS6 for 20-25 minutes. By crashing, I mean that first CS6 freezes, then I get a completely blue screen. CS6 crashes whether I edit direcctly from it, or if I go into it from Lightroom (Version 4.1). When I reboot and eventually go back to CS6, my work from all but the last 10 minutes will have been saved.
Â
I never had this problem-- with the same computer, pentab, OS, etc.-- with CS5. I did have this problem when I installed the trial version of CS6.Â
Â
I have tried uninstalling every morsel of code related to my Wacom Bamboo tablet, and that didn't stop the crashes. I have uninstalled and re-installed CS6, and that didn't work. I have updated Windows and all CS6 applications, and still the crashes persist.  I even tried calling Adobe, but after four and a half hours on hold, I had to give up.Â
Background:Â I have
Windows 7 Home Premium; Service pack 1.Â
Computer:Â Intel i7-2820QM with a CPU@2.3GHz; 16 GB RAM; 64-bit Operating System.
 System Information (perhaps more than you'd want to know?), as reported by my version of CS6:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64Operating System: Windows 7 64-bitVersion: 6.1 Service Pack 1System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreadingPhysical processor count: 4Logical processor count: 8Processor speed: 2294 MHzBuilt-in memory: 16364 MBFree memory: 12744 MBMemory available to Photoshop: 14746 MBMemory used by Photoshop: 60 %Image tile size: 128KImage cache levels: 4OpenGL Drawing: Enabled.OpenGL Drawing Mode: AdvancedOpenGL Allow Normal Mode: True.OpenGL Allow Advanced Mode: True.OpenGL Allow Old GPUs: Not Detected.Video Card Vendor: NVIDIA CorporationVideo Card Renderer: GeForce
[code].....
I just installed CS5 Design Premium on my older iMac (OS 10.5.8) and the installation seemed to go just fine. However, when I opened Photoshop to try out new capabilities, it crashed with no image open. I was just checking out the various tools. I opened it again with and was trying to edit an image and it crashed again. I've opened InDesign briefly, but didn't try any new files and it didn't crash. Haven't yet opened Illustrator. Photoshop is the program I use most often. How do I stop these crashes?
View 5 Replies View RelatedI just installed the update for Photoshop CS4 and started removing CS3 from my computer. I deactivated CS3 then used Add and Delete Programs to proceed. Instead I got a window that says I must first stop Adobe Updater from running but I can't figure how to do that and I can no longer go back to CS3 to see if I can find it there. What do I do now?
View 1 Replies View RelatedI've just bought a 1GB Sapphire HD 4850. And to cut a long story short, when I'm using my Adobe products, there is a colour tint to all images. When I had my previous nVIDIA card, I had no problem. When I uninstall all drivers, again there is no problem with colours. But when I install the Catalyst software, I have problem.
Now, I'm a photographer and use Lightroom, Photoshop and Bridge regularly. I just upgraded to CS4 which I'm still trying out. (I have no idea if this happens in CS3 as it's no longer on my computer.) I got the card on Friday, shot a wedding yesterday. As you can imagine, I'm not in the best mood. I've searched and searched and it seems to be down to the colour profiling which is enforced. Code:
my ps 7 stop respond when try to start blending options or when change colore in caracter window.
it's stop respond until press alt+F4.
I connect my camera Photoshop opens. I am running Windows XP. I have tried opening the camera and changing its default to not open, but it keeps happening. I can't find some global setting in Photoshop or on XP to stop this.
View 10 Replies View RelatedHaving a problem which is easy enough to replicate when using Merge to HDR Pro ... either directly from within CS6, from LR4 or from Bridge it is causing CS6 to stop working.
Â
What happens is that if you are using Merge to HDR then switch to another application causing Merge to HDR to lose focus eventually it will not recover and the Cancel/OK buttons are greyed out and not available. It never recovers from there.
Â
Typical symptoms where Merge to HDR stops working (and therefore CS6) are the following:
- Any sliders that had been adjusted prior to this happening are available to change, others are not;
 - Any sliders that are greyed out can still be returned to their default value by double-clicking on the slider.
Â
Photoshop has to be 'killed' before it can be used again.These symptoms are repeatable in the 32 bit version of CS6, the more files that are merged the quicker it happens. For example if you start with the "Photorealistic" preset and have 3 files open (opended using Camera Raw, Canon 5D mkII CR2 files therefore ProPhoto RGB; 16 bit; 5616 by 3744 (21.0MP); 300ppi)Â it happens withing a couple of times switching to other applications and back but with 9 files open it will happen faster.
Â
And it also happens with AdobeRGB (8bit), ProPhotoRGB (8bit) and sRGB (8bit).Happens from both x64 and x32 systems. The environment is follows:
Â
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit, Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2195 MHz
Built-in memory: 8173 MB
[code]....
I started noticing this problem a while back in CS5 and it seems to be ongoing in CS6. When I have a group of rows open in ACR, I can make adjustments as normal. Lets say that I have a bracket of images I shot of 10 frames.
I make adjustments on the ones I want to use, rate them and use the "select rated" button. If one of those images has a different color balance than the others, it will auto adjust it to match the rest. If the image that is viewable is the one with the different color balance, it will auto adjust the rest of them.
why my subscription would suddenly stop when Ive been using it all day?
View 1 Replies View RelatedI have installed photoshop CS on a Dell Latitude e6520. The installation completes successfully and I was able to active the product via the telephone. However when I go to launch the product it get all the way to the work area and then when I attempt to click anyhwere in the application it says "Not Responding" and then closes the application.
I have updated the nVidia Driver thinking it maybe a grahphics driver issue but still no luck. I have already uninstalled and reinstalled the product about a dozen times with no luck. What can I do to fix this problem.
I downloaded some graphic fonts for use with Photoshop CS4 and one of them, Frames 'n Riboons worked once and now automatically defaults to Myriad Pro when I try to use it. I have tried uninstalling and re-installing but it makes no difference.
View 1 Replies View RelatedIs it possible to insert a "stop" in the action for save for the web, just before actual save. Basically i want to be able to name my file manually (use distinctive names), but just to automate the picture size option and quality (which don't change). I know that i can write an action for an image resize and than save it with my desired file name, but i was wondering if i can do it all in "one shot" without the altering of original image.
View 1 Replies View RelatedI've seen pictures that are posted on the web, even Ebay, that if you try to right click it to save photo....it won't do it at all.
View 9 Replies View Relatedwhen i use brushes I get a jitter when moving the brush as shown in the picture. if i trace the line several times it gradually fills in but with curved lines this is hard. is there any way to stop it doing this? i am using cs2.
View 3 Replies View Relatedit is with the drawing pen, I have found that, when I load photoshop for the first time after starting the computer, the pen works as intended but if i were to close photoshop and reopen it later, the pen will cease to function with the program, despite my actions appearing in the history
View 12 Replies View RelatedMy transform controls have been stopping lately, Clicking them off and on does not help. I have to restart Photoshop
View 1 Replies View RelatedI have three machines with this same issue. XP pro fresh install of everything, OS, PS CS2, LR 1.3, etc. All updates. I found this problem related to someone updating PS from CS to CS2, but not for a fresh install. I had this same problem before my most recent XP reformat too-I reformat my machines about once a year.
I can't run a droplet on more than 25 images at a time. I have tried multiple combinations of file/folder/droplet locations. Running the droplets from LR 1.3.1 does the same thing. Running from Bridge also will not work. It works fine for a few images, but not for 50 or 100 or more.
Just installed PS CS. on Win XP.
How do i stop PDF docs opening in Photoshop?
I do have Acrobat Reader and Distiller installed too.
I would like to report a problem when running Adobe Photoshop along side Revit Architecture 2011 & 2012. When ever using the two programs at the same time I am no longer able to escape out of commands in Revit. The escape key will not work as long as I have Photoshop open.
View 3 Replies View RelatedHow to stop CTI from moving beyond end point???
View 1 Replies View Related