I would like to report a problem when running Adobe Photoshop along side Revit Architecture 2011 & 2012. When ever using the two programs at the same time I am no longer able to escape out of commands in Revit. The escape key will not work as long as I have Photoshop open.
View 3 Replies
Having a problem which is easy enough to replicate when using Merge to HDR Pro ... either directly from within CS6, from LR4 or from Bridge it is causing CS6 to stop working.
What happens is that if you are using Merge to HDR then switch to another application causing Merge to HDR to lose focus eventually it will not recover and the Cancel/OK buttons are greyed out and not available. It never recovers from there.
Typical symptoms where Merge to HDR stops working (and therefore CS6) are the following:
- Any sliders that had been adjusted prior to this happening are available to change, others are not;
- Any sliders that are greyed out can still be returned to their default value by double-clicking on the slider.
Photoshop has to be 'killed' before it can be used again.These symptoms are repeatable in the 32 bit version of CS6, the more files that are merged the quicker it happens. For example if you start with the "Photorealistic" preset and have 3 files open (opended using Camera Raw, Canon 5D mkII CR2 files therefore ProPhoto RGB; 16 bit; 5616 by 3744 (21.0MP); 300ppi) it happens withing a couple of times switching to other applications and back but with 9 files open it will happen faster.
And it also happens with AdobeRGB (8bit), ProPhotoRGB (8bit) and sRGB (8bit).Happens from both x64 and x32 systems. The environment is follows:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit, Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2195 MHz
Built-in memory: 8173 MB
[code]....
it is with the drawing pen, I have found that, when I load photoshop for the first time after starting the computer, the pen works as intended but if i were to close photoshop and reopen it later, the pen will cease to function with the program, despite my actions appearing in the history
View 12 Replies View RelatedI have three machines with this same issue. XP pro fresh install of everything, OS, PS CS2, LR 1.3, etc. All updates. I found this problem related to someone updating PS from CS to CS2, but not for a fresh install. I had this same problem before my most recent XP reformat too-I reformat my machines about once a year.
I can't run a droplet on more than 25 images at a time. I have tried multiple combinations of file/folder/droplet locations. Running the droplets from LR 1.3.1 does the same thing. Running from Bridge also will not work. It works fine for a few images, but not for 50 or 100 or more.
I was retouching a painting earlier and i could not get every detail because my adjustment layers stopped allowing me to paint on the mask.
I switched from ps v13 and v12 and niether would allow me to paint on the mask. All of the correction i did were on adjustment layers. I would add an adjustment layer and tweak it then invert the mask and then paint with the brush. Then i would merge layers. After about 4 merges it stop allowing the painting on the mask.
Windows 7 64-bit | Photoshop CS5 | Wacom Intuos4 (driver up to date)
Happily painting away, when I switch to another program, be it Skype or anything else, and then come back to PS my CS5 Media Brush no longer has pressure sensitivity, etc - just like how a bruch behaves with using only the mouse.
The easy fix is to again switch out of PS, and then back, but you have to be careful not to have the pen on the tablet giving it input but rather wait until Photoshop is fully maximized again if minimized or the brush won't regain it's functionality. Do it right though, and it will regain tablet sensitivities.
CS2 dodge tool stopped working as set, yet Burn, Sponge, Clone Tools all work; dodge tool leaves centered white specks if clicked multiple times; all my CS1 tools work; all my CS2 & CS1 tool settings are same (0 hardness, 20% exposure), rebooting does not fix; Is it possible to create this problem by accidentally typing Shift, Alt or Ctrl "," or "." or similar whilst using CS2 Dodge Tool?
View 3 Replies View RelatedCS6, Win7 Pro
Why might the Background Eraser tool have stopped working? The settings I am currently using are Sampling: Once; Limits: Discontiguous; Tolerance: 100%; Protect Foreground Color: checked.
I wanted to remove a head and shoulders photo portrait from a background, and to do so, I generally followed the instructions on a YouTube video tutorial by Ali Baba entitled How to Remove Background Around Lots of Hair Photoshop;
which showed to use the eraser tool.
My background was an off white color, with a shadow from the subject on some of it. I made a layer on top of the photo and filled it with red (instead of the dark blue in the video, so it would contrast more with the black hair of my subject); then I copied the photo into a layer and put it on top of the red (unlike the video where he erased off the original.) Then I erased away the background. Then I took the steps shown to work around the hair. At that time, the background was still not closely erased around the ears and shoulders and I put the job away for a while.
When I came back, I used the Quick Selection to select the area from the entire right side that wasn't erased yet. But I didn't know how to erase the selection, so I went back to the Background eraser and erased the rest of the right side away. Then I deleted the selection.
For some reason, however, I am not able to erase any more on the left side, and I am stymied as to why not.
Why do the hotkeys randomly stop working? Simple ones, like the move tool or the marquee tool.
The only fix i've found is having to CLICK on the tool and then the hotkeys will work again...it's really annoying - never happened in cs5...
My computer has run Windows 7 ,Run Adobe Photoshop CS6 Extended,I click "edit"-"Control of deformation",the Adobe Photoshop CS6 Extended Stop Working. Why?
View 1 Replies View RelatedOn my new Dell XPS 8500 Win 8 computer Photoshop CS6 keeps stopping working. I've tried both 64-bit and 32-bit versions and updated the video driver after phoning Dell. Also installed latest Adobe program updates. I keep getting the error message "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
View 14 Replies View RelatedI searched this issue and found many forums discussing the topic, but no solution. When using PS CS6, the arrow keys randomly stop working when navigating around in text. This is extremely frustrating. Per other discussions, and my experience, there doesn't seem to be a constant trigger. Saving the PS file when it happens SEEMS to fix it - at least temporarily. It's been happening off and on since I upgraded.
Adobe reps (they're say "employee") monitoring the photoshop.com forums suggested the fix is to close all other apps. No one works that way. Chrome (or other browsers) were speculated to be the cause. but I just had this happen without any browser open.
Sysytem details:
CS6 upgrade form CS5 Premium
Lion 10.7.4 / 16G / i7 Intel
Safari / Chrome
MS Office
Mac Mail
FontAgent Pro
Almost all of the common shortcut keys stop working when input language is set to Māori. eg. ctrl-n, v, b pretty much everything apart from ctrl, alt and space.
View 3 Replies View RelatedWhy does my photoshop10 application stop working when I try to sign in?
View 1 Replies View RelatedMy Basic GPU features were working flawless with Photoshop version 13.0 After I update to version 13.1 for CC members all my GPU features stop working. Is there a form to set my Photoshop version 13.1 in order to use my GPU features or there is a huge difference between versions that doesn't allow me to use the GPU features?
View 5 Replies View RelatedI've reset all tools, completely shut down my macbook but nothing is working.
View 2 Replies View RelatedI checked my preferences and OpenGL is enabled, so I don't understand why it randomly stops working when I'm trying to get work done. Been working for less than four hours today and have had to restart Photoshop CS5.5 6 times. It starts working for a little while, then the "Scrubby Zoom" box becomes greyed out and the shortcut doesn't work as well.
Also when I hit space (hand tool) to drag the image around, that stops working at the same time as the zoom. I'm using an Intuos4 with this, haven't had problems with it until recently but there haven't been any significant changes in my machine (PC), which has a nice graphics card, processor, etc. I'm using Google Chrome, maybe it has something to do with my browser being open at the same time as PS?
Why does my internet explorer stop working when I upen up a tutorial for Photoshop Elements 12?
View 1 Replies View Relatedi have a mac air 10.8.3 with cs6 V13.1.2 x64. The machine is running fine. I use an external usb apple keyboard, which is brand new (having just been returned from apple after a warranty case).
Launching Photoshop causes the space bar, the enter key, the up-down-left-right keys to become unresponsive to the entire operating system, even after photoshop is closed. Restarting the mac resolves the issue. Photoshop is the only foreground application launched, nothing else is running (other than background services and things like dropbox, sip, etc).
The issue affects both the external usb keyboard, and the in-built keyboard.I have tried deleting my photoshop prefs file, which makes no difference.
I have noted that bringing up the keyboard viewer ( Keyboard preferences > 'show keyboard & character viewers in menu bar'; then from the icon choosing 'Show keyboard viewer' ) will not show the key as being depressed. CLICKING on the SPACEBAR key, the ENTER or ARROW KEYS in the keyboard viewer also does not work!
ACA 2011 on Windows 7 64 bit.Walls, dors, windows, etc. stop working. (command starts, but does not run) The only way to get it back working is to do a install repair, which requires the original CD ROM. and screws up my settings.
I have noticed this working on the file that uses a project from an earlier version of ACA.How can I prevent this from happening.
Pre-release 4 I find my hotkeys stop working after several minutes in the smoke. Switching users does not remedy but restart does.
View 2 Replies View RelatedWhen using typetool in AI CS6, when using spacebar, texttool stops.
When using spacebar textool immidiatly stops.
How to fix this?
Fatal Error is appearing and AutoCAd Stop working without saving my work.
View 1 Replies View RelatedI am using 2013 C3D with SP1. After I publish sheets using the sheet set manager my layer filters stop working (will not filter layers, it will just display the last layer filter used prior to running the sheet set manager).
View 3 Replies View RelatedWhen I open a file on Inventor 2014, the screen says, that the graphic card controller crashes, after that, there´s no possibility to recover the work, because the work zone, shows a infinite white space.
This is the print screen (in spanish); translation will be like: "Screen controller stop working but it recover itself (something like that)"
I can no longer make changes to one of my gimp files. Everytime I select a tool such as pen, pencil sprbrush, the mouse icon changes, but when i try to draw nothing happens. It seems like all the other tools work, i tried the following
1. made sure the correct layer was selected
2. exit gimp and re-run it.
I'm stuck.
What would cause Osnaps to stop working on 2D section linework?
View 1 Replies View RelatedPatterns in my color scheme now extend into the middle of all walls. Is there a switch to stop the patterns at wall faces?
View 9 Replies View RelatedI am using CorelDraw Suite X5 on a Windows 7, 64-bit operating system. I always used x,y coordinates for positioning objects. Last week that option suddenly stopped working. Now when an object is highlighted the x,y coordinates always registers 0,0. If I try to re-position an object by putting in new coordinates, objects are placed way off the page. My inputs are not held and the coordinates are back to 0,0.
View 4 Replies View RelatedI have Photoshop CS3 Extended. The filters have recently stopped working, and has dropped me to a few filters to work with. Is there anyway to get my filters back without uninstalling and reinstalling the program?
View 3 Replies View RelatedI installed, removed and reinstalled Revit 2014 3 times but still no success. When I start Revit 2014 and try to start a new project by clicking on new and selecting any of the available templates like Architectural, Construction, Structural, or Mechanical, Revit gives me a message saying - Failed to open Document'. If I start selecting 'none' then the default project that starts has no elevation marks and no elevation views. Also the system families are not loaded properly as I get just one wall by the name of 'Basic Wall 1' and no other wall types are present. If I put an elevation marker to create an elevation view, there are no levels present and so how to I add further levels?
I have tried various stuffs to get default templates so that Revit works normally but it all failed. Nothing seems to work and I can't start a new project because the 'none' template has nothing in it and I don't want to create a new wall type every time.
