I started using Photoshop cs6 extended yesterday. i have no problem on tools but i have problem on saving my files in Photoshop cs6 extended. i've tried to save my files like being shown in tutorials but when i click on the 'save' or 'save as' button, nothing appear on my screen.
View 2 RepliesI download the NVIDIA DDS plug-ins for Photoshop CS5.1.I placed them in C: Program Files (x86) Adobe Adobe Photoshop CS5.1 Plug-insScreenshot of the Plug-ins folder (I overshadowed the other files .. i didn't tought that was so neccesarry..)
View 3 Replies View RelatedI am trying to open a .psdx file I downloaded from CC with PS. Error message says it is" not the right kind of document". CC and ps6 are updated.
View 3 Replies View RelatedI have seen instructions on doing this -simply open the file. But it doesn't specify the file format of the video file. When I attempt to open an avchd video file PS complains that it is not the right file type. My PS5 extended is up to date.
View 1 Replies View RelatedURL....I am using PSE 12 as a photo editor for Aperture 3.5.1 and the photo is duplicated (as a tiff) in Aperture and PSE editor opens with the image. When I close the file and say to save the file it brings up the save as window.
I tell PSE 12 to "on first save -- save over current file" it now brings up the "save as" window and won't save over the file (changes the file type from .tiff to .tif)
I have Photoshop CS6 and Elements Premiere 11 and both were showing estimated file sizes properly up until a couple of weeks ago, and both stopped at the same time. Using Image, Mode I have verified on both that the images I am trying to save are 8 bit and not 16 bit images. I am on Window 7, 64bit.
View 9 Replies View RelatedFrom the start, I wasn't able to save to jpeg without getting a dcm extension (no jpg extension). However, if I saved to Multi-picture Format, I would get the familiar .jpg and everything worked fine for a while. This morning I cannot find a file format in "save as" that results in the .jpg file extension.
View 2 Replies View RelatedAccessing metadata in Photoshop CS6 extended (file info) for any file, raw or .psd., causes application to freeze. I must force quit the application to continue. Application is running on OSX Lion.
View 7 Replies View RelatedI had worked out a psd file within ITC Zapf Dingbats font. But now I can't edit it in new purchased Ps Cs6 extend. copy the font from my older Xp laptop (Ps6) to the newest Win7 laptop (Ps Cs6)?
View 7 Replies View RelatedI purchased CS5.5 extended about 3 weeks ago and all was working fine. Just yesterday Photoshop started crashing whenever I try to open files. I've deleted preferences several times, validated my fonts, restarted my Mac, etc. all to no avail. Photoshop has become useless to me and it's part of how I make my living. InDesign seems to work OK but I haven't tried Illustrator yet.
Here is last night's crash report (half the time it crashes with no report).
Process: Adobe Photoshop CS5.1 [750]Path: /Applications/Adobe Photoshop CS5.1/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1Identifier: com.adobe.PhotoshopVersion: 12.1 (12.1x20110328.r.145) (12.1)Code Type: X86-64 (Native)Parent Process: launchd [121]
Date/Time: 2012-04-06 08:19:52.885 -0700OS Version: Mac OS X 10.6.8 (10K549)Report Version: 6
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
[code].....
I have tried multiple times now to download a trial for Photoshop CS6 Extended. Everyone says that the CS6 trial is already the extended version and only changes based on your serial number at purchase but every time I try to open a video project of mine it says "This file contains a timeline-based animation (Photoshop Extended only)"
View 1 Replies View RelatedCurrently I am running PhotoShop extended CS5, 64bit. in which i have my fovorite plugins (Topaz, Nik and OneOne) running perfectly.
I have upgraded to Adobe Creative Cloud and installed PhotoShop extended CS6 using Adobe Application Manager as recommended. It didn't ask me if I wanted to upgrade or do a new install for PhotoShop. So now I CS6 running with no Plug-ins. I need my plugins! LOL.
I tried pointing to additional plugins in the CS6 preference to the CS5 plugin folder. Upon Launch it gave me a whole slew of error messages saying something cant load or launch C+ runtime error or what not. It does open up, but it only gives access to Nik and Topaz. OnOne doesn't show up under filters or extensions.
So, what are my options?
Just copy the plugins from CS5 to CS6?
I dont't want to reinstall all the plugins to CS6 if I don't have to as I've auto updated them over time to current versions online, so only have installation files for my original purchases.
when im about to save my file *project* nothings happen
View 2 Replies View Related[CS6 Extended]I want to click with the mouse on a symbol (normally it should be I disk symbol I think) to save mychanges instead of use of File->Save or Ctrl+S.
But the problem: I can't find a disk/save symbol in Photoshop andalso don't know how can I get it.On "Window" menu I can't get a word "Save" to checkmark it.How can I get a "Save" symbol in Photoshop CS6 Extended?
My adobe Photoshop CS4 extended crashes constantly when I open/import a 3d model/file.
View 6 Replies View RelatedI have a number of PSD files I've created and I'm trying to save them as PDFs. I can Save for Web and Devices, I can save as a .gif, .eps., and every other format I've tested, but I cannot save as a PDF. I get the error:
"Could not save a copy as (filename) because the file is already in use or was left open by another application."
I'm running Adobe Master Collection CS5 with Photoshop CS 5.5 (12.0.4 x64) on a Windows 7 64-bit machine.
I have a 928 GB HD with 697 GB free.
I have rebooted and tried saving the files immediately after I reboot. I have killed my virus scanner. I have killed a number of other possible culprits including Acrotray.exe and CS5ServiceManager.ext
I have run Process Explorer as recommended by Microsoft and found no applications using the file. I've also tried saving the file to my external hard drive and/or renaming the file with only rare luck.
The boards seem to suggest Adobe isn't taking responsibility for this and pointing it back to the OS or other software. How/where to kill whatever process it is - but at this point, all my indicators point back to Photoshop.
I have the student version of AutoCAD 2012 on an HP laptop with Windows 7 Home Premium OS. I originally installed AutoCAD in June of 2012. It worked fine for 9 or 10 months but now whenever I select File/Open, File/Save, or File/Save As, AutoCAD stops responding and the spinning blue donut appears. AutoCAD never comes back and I have to close it from Task Manager. I uninstalled AutoCAD and reinstalled it, and the process went smoothly. However I still have exactly the same problem with the File operations. I apply Windows updates, but other than that have not made any changes to the software on the laptop. AutoCAD works fine for everything except the File operations. I am able to save with CTL/S and am able to open AutoCAD files from File Manager.
View 3 Replies View RelatedSave PSD File of Social Icons to Separate PNG image files for each file
View 7 Replies View RelatedI did a search around, and did not find the answer. Basically I have attempted to create an action in Photoshop CS6 which will save a file in the tiff format after i crop the image. I want the file name to be the name of the image (which is supposed to change depending on name of the image) like this:
1280x720_MGXXX.tiff, where, in my case the XXX represents DIFFERENT NUMBERS.
I want to apply the action to one image at a time. Each image has a different number (name). I record the action, add the 1280x720 text to the image name in the Save dialog. I am saving the image in a different folder from the source file. The source file name is _MGXXXX.tiff (again XXXX is a number like 2220...).
When I run the action on a file, say "_MG2221.tiff" it adds the 1280x720, and saves the file. When I apply the action on the next file (_MG2222.tif), the action overwrites the existing file, 1280x720_MG2221.tif, with the image. The action always uses the name I entered in the Save dialog!! I think I was able to do this in CS4 and CS5.
I want to be able to open a file, crop and adjust it, and then save in a diff location with 1280x720 pretended to the file name.
I am trying to find a way to save my image file as a jpeg and add -web or -print to the existing file name. This way I can easily see which files are lower resolution for web posting or high resolution for printing.
View 8 Replies View RelatedI am saving work as jpeg into desktop file.... sometimes (not always) when I go to retrieve it ...it shows up as a file that I cannot open, not a normal jpeg. I just tried to copy and paste to show here..then draged into this space and it opened...tried to save it to desk top from here but it is still showing up as a very weid icon that will not open...? In the properties it shows as a jepeg, but the icon is totally different..
View 1 Replies View RelatedI'm happy with the NX version, but if I want to upgrade to XT, how do I do it? I looked on the upgrade options for XT and upgrading from NX, is not there.
View 8 Replies View RelatedI save a lot of files to "save for web". After saving PS asks if I want to save changes to the original file. I never want to save the changes to the original. Since the default is to change the file I am afraid I will accidentally OK the change without wanting to. I would like it to stop asking and just not save it. Is there a way?
View 5 Replies View RelatedI just had a question about the slice tool. Is there anyway I can save slices I make to one .psd file so they can be applied to another .psd file?
For example with these two layouts (2 images):
If I could apply some certain slices to the first one, it would be nice to automatically be able to apply them to the second.
When i try saving something it comes up with could not save as (file name) because the file could not be found and need to save this file.
im using photoshop cs5.1.
am having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies View RelatedI found this error a bit strange, my colleague it trying to save a file and this error keeps on coming out (see attachments). When we try to save it, it only saves as a temp file. When we try to open up the temp file and try to save it, it still doesn't allow us to do. Also, when we cancel the save, the original file will be gone and he will lost all of his data. Below are the specs of the computer and version of the AutoCAD.
Computer: DELL Precision T5500
OS: Windows 7 Ult
AutoCAD Version: 2011
Also, we're using ProSteel Series 3 as well. We tried saving the file using ProSteel and just AutoCAD but it didn't do the trick. I've tried some options (listed below) that might get it to work but still no luck.
1. Restart the computer.
2. Repair / Reinstall AutoCAD.
3. Give permission to the folder (read from the forum).
I'm using the file dialog snippet as the foundation for a save as dialog box for saving a new copy of my template assembly to a project folder. Is there a way to disable the ability to click on a file in the window which puts that filename in the input box? The assembly file name is standardized and pre-"calculated" by my code and its a decent hassle if you accidentally click another file because the user would either have to rewrite the file name by hand, or cancel out of the dialog box and re-navigate to the project folder.
Inventor 2013 SP 1.1
if i need to rename or change anything in the iproperties of ipt, im doing it from the vault.my problem is that, when i change something in iproperties of an ipt thru vault, i have to open the idw to update it.
as most of the iproperties in ipt shows in the idw.
its easy to change the properties in vault. but its deleting its purpose if i have to each idw to make sure i have the updated idw.is there a code where i can open all idw and save the same file and checking to the vault automatically?
Civil 3D 2013.One of the problems my team has is that we have a number of remote offices that all work on the same drawings. To ensure integrity of the drawings, we use a Wide Area file replication and locking service to ensure the files do not become out of sync and corrupted between offices.
AutoDesk seems to open and save files and their subordinate xrefs serially in a single thread instead of in a multi-threaded manner. Because of this there is a Huge time impact on just opening and saving files at remote sites as a result of Civil 3D having to wait for the home office file lock check on each and every file before opening the next file.
We have 100Mbit down / 20Mbit up transmission links at both sites dedicated to the file replication, with Gbit backbone in both offices.
note that the remote site has a full copy of all files in its replicated share. These local files are what Civil 3D is opening. No Files are being transferred during file open unless a remote change has just occurred (proven through replication logs).
When the drawing file is opened for editing, a file lock check is performed and Windows waits for the response to ensure it can be opened for editing before telling Civil 3D. When Civil 3D has this file open, it has a list of all the xrefs for this file. Civil 3D then seems to open each file in sequence.
This is a problem when a large latency is introduced through our 3rd party Wide area file system by a remote site file lock check.
This is not AutoDesk's fault but the compounding of the two system's operational behaviours, causing a Very long wait on file open, Save, PaperSpace operations (30 minutes for large drawings).
I would like to see a multithreaded (threadpool) file open occur against the entire list of xrefs (during save as well). Then recursively executed for all subordinate xrefs of those files until the operation is complete.
As long as a file list is maintained during the operation and updated as each file operation completes (which obviously it is) in the primary thread, this should not cause any problem. All dependancies can be opened in sequence once the initial file operations are complete and when a particular file in the list is required but not open yet, it's priority can be raised in the threadpool.
I'm trying to edit some map files in the game called "Farming Simulator 2013" by GIANTS. They are png files & I can load/edit the files in paint. But after I save the files back to the proper game folder & try to run the game I get an error stating :grass_weight.png' incorrect format. Must be 8bit single channel. Is there a plug-in to save a file in this format? Am I missing something or am I just not going to be able to edit a paint,net file in paint.net? I
View 6 Replies View Related