I'm using Mac Photoshop CS5 running on Mountain Lion.
In the Photoshop import menu I've built up quite a list of scanners -- equipment I no longer have.
Any way to pare that list down to just the actual scanner I'm using now?
Seems like something needs to happen at the system level but I can't locate the offending prefs/config file(s)
I am representing .psd (Photoshop Solutions for Designers) - the magazine for graphics. We are planning to publish rewievs of scanners used by graphics (and those dedicated for them) for the test section in one of incoming issues of our magazine. So here is the research, I would like to ask you - graphic designers - what scanner would be your choice.
I am counting on your cooperation.
So far we have following scanners proposed:
HP ScanJet 8300gp
Canon 8600 F
Epson V700 / 750 pro
could be able to make a short, good review (2000 characters) of particular model ( not those mentioned only ofcourse ), we will be pleased to hear from you and your review will be publicated in our 1/2008 magazine consumer tests.
Acquiring images from cameras and scanners?
View 6 Replies View RelatedThe usual import menue has the options for importing on the right hand side. My system is now showing an import dialouge box and the import dialouge on the right is greyed out. How do I get back to the standard import screen.
View 2 Replies View RelatedI'm running Photoshop CS6 under Windows 7-32bit, on a Dell Optiplex 360 with 4GB of RAM installed. My hard drive has 96GB of free space, so system resources seem adequate.
I recently replaced an old multi-function printer and a flat-bed scanner with a new multi-function printer that is capable of flat-bed scanning too. I have disconnected the old devices and uninstalled the drivers, not only from my computer but from all the other computers on my home network too. But the File_Import menu still shows all three devices even though two of them have been permanently disconnected.I would really like to make the scanners that I no longer have disappear from that import menu.
I've recently installed AutoCAD 2014 and am working to get it compatible with my company's internet standards.
There are some features that are not cool with our IT & Security to have enabled in our office.
I'd like to remove these 3 items from the upper right menu. (see attached image).
The items are...
Sign In to Autodesk 360
Autodesk Exchange Apps
Stay Connected
How do I remove "Open with Corel Paintshop Pro X4" from the right click context menu in explorer? I have one for every version I have installed and it makes the right click menu toooo long.
View 2 Replies View RelatedHow to remove or close or shut off the layers menu.
View 6 Replies View RelatedI immediately "imported " my pictures to my Catalog. As I began to read and view the tutorials, I realized that this was probably premature and so I "removed" the pictures. Somehow, in this process, I also removed the menu bar "catalog" from the left side of the screen (now it just shows "folders"). How do I reinstate the Menu bar "Catalog"?
When I eventually imported my pictures again, there were now duplicates of every picture and many pictures have several duplicates. What is the best way to remove duplicates rom Lightroom? Also, I checked "My Pictures" on my PC and all these duplicates are there, as well.
I am exporting thousands of shots for my website and I am making a customized watermark/copyright title for each collection. It is working fine except now I have quite a few customized watermarks which I probably will never use again. How do I remove these from the pull down menu?
View 8 Replies View RelatedAfter installing the TWAIN Plugin for CS4 form the CS4 disk into my Applications/Photoshop/Plug-ins/Import-Export folder, it does not appear in the import menu after Photoshop relaunch.
Using Mac OSX 10.6.8
how to remove scanners from the import menu of photoshop?
I just upgraded and I want to clear out the old garbage.
how to disable - Content menu (menu on right mouse click in Explorer) - Browse with Corel PaintShop Pro X3/X4 ? I do not use this "feature".
View 8 Replies View RelatedIs it possible to edit the menu options to remove those items I will never use ? If so then how ?
View 5 Replies View RelatedI moved the TWAIN plug in... and still the scanner doesn't show up in the import menu... in fact the import menu option is greyed out and unavailable.
I'm on an iMac running OS/X 10.8.5..I have been struggling with this for 2 weeks now, I even bought a new scanner yesterday and still nothing shows up. if this is a function that Photoshop Elements 12 is no longer capible of doing... if so any photo editing software that CAN do this?
Just installed Elements 12. Added the TWAIN driver according to the site instructions. Still see no TWAIN import option or menu? How do I get to this?
View 2 Replies View RelatedHow do i remove unwanted profiles from the profile menu in camera calibration
View 3 Replies View RelatedA folder does not appear in my import menu. It is there on my hard drive and in my Photoshop Elements organizer. I want to import photos from the folder into Lightroom 4. What can I do?
View 1 Replies View RelatedCan you import in to VS X4 and X5 the menu templates from MovieFactory 7? In VideoStudio X5 and X4 there are only limited menu templates.
View 2 Replies View RelatedI have importet pictures from mu card. No problem. But I needed the same pictures only with very important metadata, that my collegue made. So I got the pictures from him om a stick. Lightroom refuse to import them. I have tryed to delite the pictures from my card, so that Lightroom don´t think that they are allready there. But I still can´t import the pictures.
View 1 Replies View RelatedI've been using LR3 for over a year - current version 3.6. For no apparent reason, the 'Make second copy' menu item no longer shows in the import panel. Imported files are copied to the location specified the last time the item was available. I've looked in all of panels, but don''t find any way to disable the second copy function, or to manage the second copy function. I'm running MAC 10.6.8.
View 3 Replies View RelatedI tried to first open a KDC file, which is a RAW file from my Kodak Camera, by clicking on File>Open but it didn't work. So then I attempted to open it using "Import". That was when I found out Import was grayed out. Why would that be? I just installed the program and this happens! Is there a setting I need to change?
View 5 Replies View RelatedFirst, I'm using the new Lightroom v4.1 on a Windows 7 x64 system.
I'm trying (without success) to remove volumes from the list that's shown when a user clicks on the 'Import' button (lower left of screen) and 'Select a source' which, naturally, shows all the drives in my system.
There are five volumes; four internal and one external.
There are only two drives which contain photos that I'm interestered in importing/editing.
The other drives contain files that I have no interest in editing or organizing.
For example, several hundred (scanned and collected) very old family photos that I wish to keep pristine, with no editing of any kind. As for placing them in collections, I already have them in dated, carefully named folders.
So, as this is a shared computer, I want to remove the volumes (drives) so that the aforementioned photos can't be inadvertantly imported.
I am attempting to import a previous customized menu with routines that worked beautifully in Autocad 2002. I can import the menu but the routines don't work. I have copied the search paths identical to those in Autocad 2002 in the tools>options>files in the support file search path, but to no avail.
The menu was developed by Andy Pease (Andy Acad) who is now with Autodesk.
If I do an import from my memory card, choose my external hard drive as a second location for the import, and then go into my catalog and delete the bad photos, is there any quick way to also remove those files from the backup on the external hard drive? I've got a ton of wasted space on my external HD due to things that I've deleted and don't know of any simple way to get rid of them short of formatting the drive and doing another export, which takes a long time and isn't something I want to do all that often.
View 3 Replies View RelatedA co-worker scanned a photo and emailed it to me to edit it and try to improve it, but everything I want to do is grayed out so I can't select it and I can't figure out why. Maybe it has to do with how she scanned it?
It's CMYK, 300 dpi, and 8 bit.
I'd like to sharpen it and adjust the hue/saturation, but they're grayed out.
why this is happening and how I can work around this so I can make the changes I need to make?
When selecting a sub menu from within a main drop down menu the arrow points to the right but the actual sub menu pops up on the left in most cases. I have only noticed this recently and wonder if I have inadvertently messed up a setting as in the past I cant recall this being so but I don't use the editor a lot so may be mistaken.
View 9 Replies View RelatedI recently upgraded to 2012 but forgot to install the express tools, Doh!. I installed them through control panel repair and everything works. Except when I close and restart ACAD the menu bar express menu disappears. I can bring it back by using cuiload but this is not ideal. Any way to get it to stick?
AutoCAD 2012
Dell Precision T7400, Intel Xeon @3.4GHz
Win XP 32bit 4GB RAM
Nvidia Quadro FX 3700
Cyborg R.A.T. 7 mouse
How do I add custom menu items to the main menu in Illustrator?
I would like to build my own menu with scripts that I use alot. This is a powerful feature that I use alot in other programs, but I have not seen any examples of this in illustrator.
all the twirly triangle dropdown menu things (what's the official term?) underneath the contents menu of layers. Especially now that I'm working with Convert to Shape Layer functionality I'm wondering what an efficient/shortcut based way to work with these inner menus is. For instance when converting Text to Shape layers - it seems like I'm spending most of my time dealing with twirly triangle management
I don't even know how to search for them: obviously searching for anything "collapse" takes one to a bunch of collapse transformations stuff.
Using VS X5 - Just making up a menu for my dvd im burning. Haven made a menu since using ..VS11+ I think it was.
All seems very very familar...similar etc and not asking it to do anything out of the ordinary which 11+ couldnt cope with ( just nowadays using all this AVCHD malaky etc )
Question -Main menu of my dvd - Why am I getting on my main menu page the begininings of my movie!!! I have my main menu setup ( bringing in a pre-made 30second clip on which I will put 'Press Play to watch movie' and/or 'chapter select'. ) When i preview my main menu page...I see the 30second clip i wanted but as it runs so too does my actual movie - at the same time.
I cant seem to find a button to ..basically..tell it not to play the movie as soon as you load the dvd but instead to wait until the 30 second main menu runs and automatically reruns etc until YOU decide to press the 'Play movie' button.