I downloaded the Adobe CS6 cloud on September 1, 2012, and my laptop is a Dell-alienware m11x and it has 4 GB of RAM DDR3,it has an Intel i5 processor of 1.07 GHz,and it has a separate Nvidia graphics card.
So I'm pretty sure it should be able to handle Photoshop, but every time I go on Photoshop it makes my entire computer slow and the text key doesn't let me type in Photoshop.
I have a type layer with some text in it (a headline, let's say). I click on the layer, I click on the Character Panel, and first thing I see is the color in the Panel is not the color of the font in the layer.
I then click on any Panel property, and the text in this layer is replaced by text from another layer in my document ( a paragraph layer, let's say), but the color is not the same as the layer the text came from.
Photoshop (CS3) I can't get the type tool to work like it usually did. I just get a straight line.
View 9 Replies View RelatedHas any body else noticed that if you create a work path, then create a shape layer (say a rectangle) and type some text on the rectangle (text on a path) that if you commit the type and switch to the Path Selection Tool to edit the path text (position of the starting or end points) photoshop cs6 replaces your previous workpath with a workpath of the shape layer you typed on?
Is photoshop cs6 supposed to work that way?
Windows 8 x64 and photoshop 13.01 new document a create a workpath create a rectangle shape layer and type on the rectangle shape layer path. The orginal workpath has been replaced by the rectangle shape layer path
Once I had completed working on a project in PSE9, I 'saved as' my work.
I then closed the program and went to re-open the file however, the file appears with the extension 'File' and is un-accessible in all of the photo viewing software I have available. The file is however, still a large file - 85MB - which would suggest all of the file information is still in-tact.
I tried opening the file in several different programs, I've tried re-nameing the file, opeing the file properties to change the file type, backing up the file then restarting the computer and program. So far nothing has worked.
I have been using PSE9 for a couple of years successfully. I use the horizontal type tool in Edit to put details on my photographs. Today the function has stopped; I have de-installed and re-installed my original programme but the same result - nothing. I can select the horizontal type tool and set the cursor; but nothing appears as I type. A layer does appear and when it is clicked you can see the text that I have typed but it simply doesn't get onto the photograph any more.
View 2 Replies View RelatedI recently requested assistance to find French accent keyboard shortcuts. This I received, but I can't seem to get these shortcuts to work using the Type Tool on a document in CS6. Is there a particular setting that I need?
I am working with a PC. I have even tried using a built in font to ensure the problem was not that the font of choice not having the accents I was looking for.
I am using Illustrator CC under a subscription on windows 8. When I go to use the type tool it does not type. I will click on it, create a box or double click to have the horizontal blinking text line show up. When it shows up this time it is a dot and does not show type on screen. So for example I would be sitting here typing this message, but you would not be able to read it as it does not show up on screen.
View 1 Replies View RelatedI'm working on mating two assemblies together by work points on a part inside of them. Here is the code I'm using. It worked with work planes, but when repurposed it to work points, I get a type mismatch when the code tries to generate the work point proxies:
Dim oPartPoint1 As WorkPoint oPartPoint1 = oOcc1.Definition.WorkPoints.Item("botMatePoint") Dim oPartPoint2 As WorkPoint oPartPoint2 = oOcc2.Definition.WorkPoints.Item("matePoint") Dim oAsmPoint1 As WorkPointProxy oOcc1.CreateGeometryProxy(oPartPoint1, oAsmPoint1) Dim oAsmPoint2 As WorkPointProxy oOcc2.CreateGeometryProxy(oPartPoint2, oAsmPoint2)
First it stops pasting anything except the first thing copied when Gimp opens, and now this. When I try to search for a font or type in text in the text tool in Gimp 2.8, it just jumps to random other tools instead of typing.
Why can't this program ever seem to work FULLY?
Today Illustrator CS4 decided to start crashing on me when I try to paste text into the art board. It will also not allow me to type text into the artboard. Whenever I try to type, it just does all the tool shortcuts. I have alread tried deleting the preferences and that hasn't worked at all.
View 1 Replies View RelatedI've croppsed and resized an image
I try to put text over it and then move that text
I just can't move the text
Instead the image layer moves
I have recived an illustrator file which ontains some text and I have to update the labels on the file but it seems the text has been chnged to Outlines Path. how i can convert them to regular editable text type?
View 4 Replies View RelatedI can't type text anymore. I choose the text tool, position it somewhere in my drawing, start typing but nothing shows up. I can see where I placed it because the small box is there. I tried adjusting to various point sizes, different colors, different fonts, but nothing seems to work. If I type something, what I typed shows up in the layer name but not the picture. Would anyone know what might be going on?
View 5 Replies View RelatedI am using photoshop cs 2.
Recently, I created an image and clicked my text tool and then clicked on my document, and when i tried to type... no text would come out. I can't use any letters, spaces, or returns. However, if I copy and paste text in it will show up but I cannot backspace it or add to it, but i can click to the front and my delete key will work. I have recently installed adobe premier pro if this has anything to do with it i am not sure. I have tried the repair photoshop installing feature, a full uninstall and reinstall, and dumping my preferences folder.
I'm on a normal document it creates the text layer and i get a blinking cursor i just can't type anything ... my keyboard is working fine because i can use shortcuts like (ctrl +t) and those work i just can't type anything at all...
before the full reinstall it would crash if i copy and pasted text in, but now it does not crash.
I am currently using photshop cs2(9.01). I am using xp with auto update. I have one gig of memory.
Everything was working fine, and now I can't type anything. The cursor does not move. I tried typing on the line also nothing.
I think I did something to create this problem.
I tried deleting the preferences file, but that didn't work.
No matter what I do, or where I've checked, I can't get text to show up on my either jpg or psd version of an image. The text box isn't too small (checked that), text is black on white background (check), even changed fonts to test that. I'm working on a PC, Windows 7, CC and/or PSCS6 -- tried them both.
View 1 Replies View Relatedhow do i type text over a photo picture then resize to 8.5x11 chance1@comcast.net
View 6 Replies View RelatedI have seen some design of text that is very clean but for some reason, my text has some kind of feather on it. I have tried to change different properties of the text but it doesn't work. As you can see in the image, the first button, the text is very clean (got it from a website) compared to the second one.
View 2 Replies View RelatedNew to Photoshop and was given v.7 as a gift, I'm trying to add text to a signature I'm makeing but when I select type tool, drag a text box onto my frame I can see any text/type. The box is there but I can't see what I'm typing? the top left corner box flashes and it looks like there are tiny characters in there, although without a magnifying glass you would never see it? how do I add text to my frame?
I can not type text anymore . If I try it prints only lines. How can this be fixed?
View 2 Replies View RelatedI created a path with the type tool, selected the path in the Paths panel, I started typing on the path and the type followed the path, though I chose edit > free transform path and scaled it, though the text did not move with the new path and now it is no longer on the path?
1. Why did the text not stay on the path as I transformed it?
2. How do you hide the path so you do not have to see it? I want it there only as a guide for my text to flow across.
I am trying to design a pattern with different peoples names in (You can see a rough one I did in the image below, all the 'NAME HERE''s are on seperate text layers) and would like to know if there is a way to update all the type (i.e. change the 'NAME HERE' to actual names) at once? I know you can link the layers and press shift to edit the formatting but I want to update the actual letters.
View 2 Replies View RelatedProblem: Unable to type lowercase text in PS.
Version: CS2
OS: Windows XP
way to quickly "convert" a line of text, created by just clicking with the text tool, and typing, into a text block? Other than copy and pasting the text in to a new, drawn out text box?
View 2 Replies View RelatedInstalled CC a few days ago and appeared to work fine. Presents and Plugins up and running. Did the update that showed up already too. Tried to use the type tool for a customer project last night and it won't work. I just get a square black dot and no text appears, nor a text box. Use a MacBook Pro 17" with Mountain Lion.
View 2 Replies View RelatedI have a text box containing text. I know the shortcut to change the leading - alt + arrow keys
To use this shortcut I have to select the text which puts big black blocks through the text and I can't really see the leading.
Is there a way to use this keyboard shortcut without selecting the text and possibly just select the text box?
Is there a way to change the color of the text selection.
Ever since I've installed CS6 my Text tool has not been working properly AT ALL. a Number of problems
1. I cant resize using the 00.pt at all. If I switch from 72 to 48 (or any other number) it will stay the same
2. manually rezising also causes issues, I don't get a full preview of the text even after sized. its cut off at 50%-75% height
3. the bounding box doesn't even go outside the entire object. its usually about 20% of the height
4. it often needs to "load" I've NEVER seen this before.
Its also since caused problems to CS5.
I have one large file and think it didn't save correctly or something. I've tried quitting and relaunching Photoshop but that doesn't work. Editing text in other Photoshop files works normally.
As soon as I click on any text with the type tool as though I'm going edit or style the text, the text instantly changes. Both the content and styling of the text is replaced as soon as the cursor is placed anywhere in the string of characters.
The really weird thing is the updated text matches text that appears somewhere else on the page. If I click the other text that it now matches that will also get automatically replaced by some other text on the page. And it goes on and on. It's impossible to edit or style any text unless I create new text.
I think the file has miss-arranged references to elements which only becomes apparent as I'm trying to edit.
In Photoshop CS6 the flashing type cursor cuts through several lines of text (see image).
This makes it hard to select text since it is hard to tell which line the cursor will select (see image).
Can the text cursor be resized? This happens no matter what type size is used or what paragraph settings are selected. I am using Windows 7 professional, service pack 1 on a Dell Precision T3500 with 8.0 GB RAM.
When I try to type into a new box, the entire box has a red tent to it. How can I stop this?
View 4 Replies View Related