have these two buttons here. As per the client requirement, the icons should have a different green and red color. I do have the RGB details for it but unfortunately, I don't know how to change the color for these buttons in Photoshop.
View 1 RepliesA few years ago I learned in school the usefullness of global color. I used it today and it was very usefull to quickly change the color of a lot of different objects at the same time.
HOWEVER; I remember they also tought me that it was also possible to change the brightness or shading or something inside one global color.
for example lets say I picked a red as a global color, and I have 10 objects all in that red. Then it should be possible to let 5 of those objects have a lighter version of that red color.
Then afterwards when I change my global color to green, all the objects change to green, and those 5 objects now have a lighter green color.
Am i remembering this correctly, and if so; how do I apply this? Because I cannot figure it out...
I'm working on this study and I need to change the color of an object inside a symbol when I click another object.
The object is called "bola", wich is inside the symbol "ponto" and the clicking object are the colored pencils (each pencil should change the color of the symbol's object, giving the impression you'd selecting a different pencil to draw).
I think it's simple to understand what I mean when you see the files.
I already tried this line on click event of the pencils, but it didn't work:
sym.getSymbol("ponto").$("bola").css("color","#123456");
I would like to improve the experience of drawing as well. I made it with the "mousedown" event. Is that a better way to get a similar effect?
I'm using Photo & Graphic Designer 2013. I notice that the buttons are now under the Page Elements menu. I'm trying to figure out how to change the button color without losing the 3D effect. The Help says:
�Change the color by clicking on the appropriate colors on the left end of the Color Line and choosing 'edit'
if I just highlight the button and change the color, it turns the button into a flat color.
I don't give the right keywords with Google !?So from a classic selection (or ALL for ALL Blocks of the DWG) of entities,
we will keep ONLY blocks (Static or Dynamic)I am looking for a Lisp/VLisp routine to update all Color of Hatches inside Blocks when the Hatch Color is xxx If the color hatch is NOT XXX we don't update !
The problem : update all hatch from blocks where Color = 255 (or any other value)
---> other classic Color (1-256)
--> RGB Color 255,255,255 or any other
I don't know at all how to switch hatch entities from classic color to RGB color inside a Block..And dynamic block in Lisp/VLisp are far from my level 0.2 in Lisp ...
if you have the Update Numeric button on inside CFX everything gets pretty slow. That wasnt happening before the SP1.
View 1 Replies View Relatedi create a button, when you clik it with this command:
sym.play("myLabel");
you go in the stage timeline to the label called "mylabel" ...all ok
but if i save my button as symbol when i press it, it don't go to the label on the stage called "mylabel"
What i need to write if i whan that my button inside anoter simbol work?
--Toolbox: The 2 columns of Tools on the left side of the Editor screen.
--Foreground Color & Background Color: The color filled squares at the bottom of the Toolbox.
--Color dialogue box: This is the pop-up that is labeled at the top with "Color". It shows 48 different color squares (6 rows by 8 columns); they are labeled "Basic colors:". Right below the "Basic colors:" array is another 16 empty squares (2 rows by 8 columns) to be filled with colors to be defined. There is a "Define Custom Colors>>" button when clicked opens up a color picker with HSB RGB stacked below the color field screen. See this link to the Microsoft "Color Dialogue Box", [URL]
--Adobe Color Picker: The interactive dialogue box with the color field screen to the left and the HSB RGB numbers stacked on the right side.
[URL]
The problem:In PSE 10, when using the Eyedropper Tool or clicking on the Foreground Color or the Background Color, the Microsoft Microsoft "Color Dialogue Box" pops up instead of the "Adobe Color Picker" dialogue box. This started about a month ago. I use Windows 7.
I want the "Adobe Color Picker" to pop up (like it used to) inside PSE 10.
There are many examples of creating rectangular patterns, but not many, if any, of interrogating existing patterns.I have attached the files and a screenshot of a rectangular part inside an assembly. The part contains a rectangular pattern of holes and workplanes.how do I get hold of each proxy of the workplane in the pattern?In other words I don't know what to put in the for loop at the end of this code fragment:
If _invApp.Documents.Count = 0 Then MsgBox("Need to open an the assembly document") ReturnEnd If If _invApp.ActiveDocument.DocumentType <> DocumentTypeEnum.kAssemblyDocumentObject Then MsgBox("Need to have an Assembly document active") ReturnEnd If Dim asmDoc As Assembly Document asmDoc = _invApp.ActiveDocument Dim asmDef As AssemblyComponentDefinition asmDef = asmDoc.ComponentDefinition im occurrences As ComponentOccurrencesoccurrences.
[code]....
I just created a shape in photoshop and I want to add color inside of it but only in the shape.
View 3 Replies View RelatedWhen i go to stroke a shape ( for example a cartoon head) once its stroked in changes the inside colour as well. It used to be fine but now it is doing this and i dont know why.
View 1 Replies View RelatedCan I change the program buttons so that they look like the same as Photoshops?
Despite using many times now, I always find myself searching for the cropping tool
Solution: make the icons the same as Photoshop's
I'm hoping that replacing the graphics is easy as replacing a folder full of graphics.
I have a car image.. but I need to copy it out and into the bunch of circles. And the circles... oh boy. I tried using the Elliptical Marquee tool and made some circles... well it didnt work... I need a bunch of overlaping circles that dont look all too special, but have nice colors and when the overlap some kind of mixing color or effect.
Then I would like the picture of the car to be put in the bunch of circles, make the car colored opposite to the color the part is in. Like a wheel is in a blue circle... the wheel will be yellow etc.
Also I would like the page set-up to be the size a printable page is... so What is the # of pixels I should set it too for the best Printable Paper page ( standard size paper)
PPS:
Also If I have a Image and I want to fill the background a center color..
I enclose button where I would like to change its colour to D2F1AD and text within button.
View 5 Replies View RelatedIn this lesson we will consolidate code to prevent code reuse. Follow along as we demonstrate by doing the following and more:
Apply a color to a form command button, loop form controls, and save and get the color from registry
Part 2 of 7
cs_setInnerHtml('video_43f4e134-ee93-489d-ba2f-80042d243821','');
[URL]
The text for my item balloons is on a layer that i need turned off so i need to change the layer the value inside the balloon comes out on.... how do this?
View 1 Replies View RelatedI see two icons (essentially a dot and a rectangle) inside my color fill indicator at the bottom of my screen. I can get the dot to appear in objects I create by "combining" but cannot get the rectangle to replicate in any created object. These are in an imported file. What do they mean?
View 5 Replies View RelatedSample code to change attributes properties when the block is inside a multileader?
View 3 Replies View RelatedI'm new to scripting and i want to make a facial controller panel. but the case is when i want to change the morpher value by slider inside maxscript "" i don't know how to do that ""
View 2 Replies View RelatedNeed to change the button language quickly (whenever you need a pro they don't answer ), but my attempts never look so good as the original . This is the button
I need it to say "Jetzt Kaufen!", with the same text style . I can delete the text and type something, but it never looks any pro .
I've imported a ribbon banner where I will enter the text for a name within the borders of the ribbon banner later. I can adjust the line width of the ribbon banner outline and the color of the banner outline without problems. I want the outline of the banner to be one color and the interior of the banner to be another...how do I color fill the inside of the banner?
View 3 Replies View RelatedI know this is an easy one, but how do you change audio levels (volume) inside a song track, including length of fade in and fade out?
View 2 Replies View RelatedI have an assembly which contains a CComPtr<ComponentOccurrence> pThisCompOcc , and I'd like to do two things.
Get the name of the "base" object, not the display name of the occurence Change the model and user parameter values of the occurrence I suspect that I need to find the function or method which gives me a CComPtr<PartComponentDefinition> pPartCompDef which the occurrence points to for the Q1, but what about Q2?
Presumably the parameters are associated with the Component Occurrence and the "real" name is associated with the Part Component Definition?
Is there a way to change attribute properties (ex. text width factor) when the block is inside a multi leader? Double click on it only show the attribute value, not the enhanced attribute editor.
View 2 Replies View RelatedIs there a way to change the font type and size of the Level within the schedule?
View 1 Replies View RelatedI'm trying to use this command to change the colour of objects inside of a document using applescipt but i keep getting an error "adobe illustrator "can't get color"" the colour exists and is active on a document. I have read the manual on variables and i'm a little lost on what i'm doing wrong, heres what i've got so far:
tell application "Adobe Illustrator"
if color is "C=0 M=0 Y=0 K=90" then
set color to "C=0 M=0 Y=0 K=90"
end if
end tell
i understand this is quite basic but its all i have to start with at the moment
Logitech M305 - 3-button mounse (Left/Right/Center wheel) Center Wheel may be rotated or pressed for 2 separate functions. When rotated, does scrolling, when pressed USED TO PAN. Now, for some reason it's changed to zoom.
How do I change the middle wheel, when pressed from Zoom to pan. I looked within the help desk and there is informaion on Macros and other commands, can't really understand that, but just simply need to get it back to the PAN command.
how to change the "Label" of a ribbon split button. It keeps inheriting the name of the first added button.
View 2 Replies View RelatedWhen I have any kind of layer, and I want to change the foreign or background color (with the color picker) I just cant. When I click on the foreign or background color it automatically selects the eyedropper tool, and I don't want this to happen.
View 1 Replies View RelatedA while back I saw a video about using the video editing capabilities. In particular the video showed a car with a colored sheet over it and the in the video the sheet was either pulled off the car or the car moved out from under the sheet (I cant remember which). Then the video showed how to use the color replace tool to change the color of the sheet throughout the entire video.
View 2 Replies View RelatedI have a star that I would like in a specific color, but am having issues changing it with the replace color and/or color replacement tool. The image is small, but I am trying to have all the pixels. The color I want to use is Pantone solid uncoated 655 U. This is the image I am trying to change.
View 4 Replies View Related